Thursday, May 21, 2009

Question and answers Electrical Maintenance Unit
- 1 -
1. What is static electricity?
Static electricity means electricity at rest. If we join a charged conductor to another
conductor, electricity flows from one to the other. This way an electric current is
produced, which lasts for a moment only. Static electricity is no use. Rubbing of two
different materials having different electrons produces this.
2. What is current?
Flow of electrons in any conductor is called electric current. Its symbol is ‘I’ and
measuring unit is Ampere measured by ammeter or ampere meter.
3. What is electro-motive force (emf) or voltage?
It is the pressure that moves the electrons to flow in any conductor. It is also known
as electromotive force voltage. Its symbol is ‘E’ or ‘V’ and measuring unit is volt
measured by voltmeter.
4. What is potential difference (P.D)?
The difference of potential between two points in a circuit is the voltage required to
drive the current between them or the voltage drop between those two points is
called the potential difference.
P.D = R * I volts.
5. What is terminal voltage (VT)?
It is the voltage available at the terminal of the source of supply. It’s symbol is VT.
VT = emf – P.D
6. What is resistance?
Resistance is the property of a substance, which gives opposition to flow of electrons
through itself. Its measuring unit is ohm and measured by ohmmeter, multi meter,
wheat stone bridge, and post office box. There are two types of resistances and they
are fixed resistance and variable resistance.
7. What is ampere?
The international ampere is defined as that steady current which, flowing through a
solution of silver nitrate, deposits silver at the rate of 0.001118 gm/sec.
8. What is volt?
The international volt is defined as 1/1.0183 of the emf of a Weston cadmium cell. It
is that difference of potential which, when applied to a conductor whose resistance is
1 (one) international ohm, will cause a current of 1 (one) international ampere to
flow.
Question and answers Electrical Maintenance Unit
- 2 -
9. What is matter?
The matter is defined as anything, which possesses weight and occupies space and
can be in any of three forms solid, liquid or gaseous. The matter consists of three
ingredients, which are protons, neutrons and electrons.
10. What is the speed of electricity or electrons?
The speed of electricity or electrons is 297842 km (186000 miles) per second.
11. How we get electric shock?
On all alternators, transformers neutral is earthed. Human body is conductor and
when touched to the live conductor it completes its shortest root though the body and
the body gets electric shock in which its nervous system, the heart, respiratory
system may cease to function.
12. What is fuse and what materials used for fuse wire?
Fuse is a weakest point in an electrical circuit, which melts when the excess current
flows through it in the electrical circuit.
The materials, which can be used in fuses, are tin, lead, zinc, silver, antimony,
copper, and aluminium, etc.
13. What is fusing factor?
The ratio of minimum fusing current and the current rating of fusing element is
called the fusing factor.
Fusing factor = minimum fusing current / current rating of fusing element. Its value
is always more than 1 (one).
14. What is soldering and what is brazing?
Soldering is the process of joining two metals with an alloy whose melting point is
less that of the materials to be soldered.
Soldering at high temperature using brass as solder is called brazing or hard
soldering.
The composition of the fine solder (soft solder) is tin 60% and lead 40%. Its melting
point is 190°C and is widely used.
15. What are the sources of electricity?
a. Battery (chemical source)
b. Generator (magnetism)
c. Thermocouple (heat generated)
d. Light (photo electric or solar cell)
e. Pressure (piezo electricity)
f. Friction (static electricity)
Question and answers Electrical Maintenance Unit
- 3 -
16. What are the effects of electric current?
a. Physical effect.
b. Chemical effect.
c. Magnetic effect.
d. Heating effect.
e. X-ray effect.
17. What is fire?
Destructive burning of any material is called the fire. Fire is the result of combining
fuel, oxygen and heat. If any one among three is separated the fire will come to end.
18. On what factor resistance of the substance depends (Laws of resistance)?
a. The resistance of the conductor is directly proportional to the length of the
conductor.
b. The resistance of the conductor is inversely proportional to the cross-section of
the conductor.
c. The resistance of the conductor depends on the nature of the material by which it
is made. That is specific resistance of the material.
d. The resistance of the conductor depends on its temperature.
The formula to find the resistance of the substance is below.
R = ρ L Ω
A
Where ρ is the constant for the material called its specific resistance or resistivity.
19. What is specific resistance or resistivity of the material?
Specific resistance of the material is the resistance of a piece of unit length and unit
cross-section (unit cube of that material). That is the resistance between the opposite
faces of unit cube of the material.
Or the specific resistance of any material is the resistance offered by the opposite
face of that material.
The unit of specific resistance is Ω/cm3, Ω/inch3, Ω/m3.
Question and answers Electrical Maintenance Unit
- 4 -
20. What is the temperature co-efficient of resistance?
Temperature co-efficient of the resistance of any substance is, change in its original
resistance due to the change in temperature. The temperature co-efficient of
resistance of material is the ratio of increase in resistance of 1°C rise in temperature
to the original resistance of the material (strictly at 0°C).
Formula for the resistance measurement is,
Rt = R0 (1+αt)
Where Rt 􀃆 Resistance at t°C.
R0 􀃆 Resistance at 0°C.
α 􀃆 Temperature co-efficient.
t 􀃆 Temperature rise.
21. What are the effects of temperature on resistance?
The effects of temperature on resistance are
a. In certain pure metals such as gold, copper, silver, aluminium etc. the resistance
increases with increasing temperature at fairly regular manner. Such metals
possess positive temperature co-efficient of resistance.
b. In certain materials (alloys) such as eureka, nichrome etc. the change in resistance
due to increasing temperature is irregular and negligible for a considerable range
of temperature.
c. In case of certain materials belongs to insulators, electrolytes such as paper,
rubber, glass, mica, carbon, acids, alkalies etc. the resistance decreases with
increasing temperature at fairly regular manner. Such materials posses negative
co-efficient of resistance.
22. What are the classifications of voltages?
a. Low voltage: Voltage not exceeding 250V. That is 0 – 250V.
b. Medium voltage: Voltage above 250V upto 650V comes under medium voltage.
c. High voltage: Voltage above 650V upto 33 kV comes under high voltage.
d. Extra high voltage: Above 33 kV voltages are extra high voltages.
23. What is coulomb?
It is the unit of charge. One (1) coulomb is the quantity of electricity, which is
circulated by a current of one (1) ampere in one second. The letter Q denotes it.
So that 1 coulomb = 1 amp * 1 second.
24. What is farad?
Farad is the unit of capacitance and the letter F denotes it. A condenser has a
capacitance of one (1) farad, if it is capable to maintain a charge of one coulomb
under a potential difference of one volt between its plates.
Question and answers Electrical Maintenance Unit
- 5 -
1 farad = 1 coulomb / 1 volt. = Q/V.
25. What is henry?
It is the unit of inductance and the letter H denotes it. A circuit has inductance of one
henry, if an electro-motive force of one volt if induced in that circuit, when the
current in that circuit changes at the rate of one ampere per second.
1 henry = 1 volt sec / ampere.
26. What is the least count of out-side micrometer?
The least count of out-side micrometer is 0.01mm.
Question and answers Electrical Maintenance Unit
- 6 -
27. State symbols for quantities and units.
Sl.No Name of the quantity Symbol Name of the unit Symbol
1 Volume V Cubic meter m3
2 Time T Second S
3 Frequency F Hertz Hz
4 Rotational frequency N Reciprocal second S-1
5 Slip S
6 Speed, Velocity V Meter per second m/s
7 Mass M Kilogramme Kg
8 Density P Kilogramme per cubic meter Kg / m3
9 Momentum P Kilogram meter per second Kg m/S
10 Force F Newton N
11 Weight G Newton N
12 Torque T Newton meter Nm
13 Pressure P Newton per square meter N/ m2
14 Work W Joule J
15 Energy E,W Joule J
16 Power P Watt W
17 Efficiency η
18 Electric charge Q Coulomb C
19 Emf, Voltage, PD E Volt V
20 Electric flux ψ Coulomb C
21 Capacitance C Farad F
22 Electric current I Ampere A
23 Magneto motive force Fm Ampere turns AT
24 Magnetic flux density B Telsa T
25 Magnetic flux ϕ Weber Wb
26 Self inductance L Henry H
27 Mutual inductance Lmm, m Henry H
28 Resistance R Ohm Ω
29 Resistivity ρ Ohm meter Ωm
30 Conductance G Mho
31 Reluctance S Reciprocal henry H-1
32 Impedance Z Ohm Ω
33 Reactance X Ohm Ω
34 Admittance Y Mho
35 Active power P Watt W
36 Reactive power Q VAR VAR
37 Apparent power S Volt-ampere VA
38 Number of turns N
39 Speed N Rotation per minute r.p.m
40 Number of phases M
41 Number of pair of poles P
42 Luminous intensity L Candela Ca
43 Luminous flux φ Lumen lm
44 Quantity of light Q Lumen second lm S
Question and answers Electrical Maintenance Unit
- 7 -
45 Illumination E Lux lx
Question and answers Electrical Maintenance Unit
- 8 -
28. State Greek alphabets and what for they are used?
Sl.No Symbol Name Used for to indicate
1 α Alpha Angle, temperature co-efficient of resistance
2 β Beta Angle
3 γ Gamma Angle, conductivity
4 δ Delta
5 η eta Efficiency
6 θ Theta Angle, temperature
7 λ Lambada Wave length
8 μ Mu Amplification factor
9 π Pi 22/7
10 ρ Rho Specific resistance, resistivity
11 σ Sigma Charge density, fractional slip
12 φ Phi Phase angle
13 ϕ Capital phi Magnetic flux
14 Ψ Psi
15 ψ Capital psi Electric flux
16 ω Omega Angular velocity
29. What is conductance?
Conductance is the property of the conductor, which allows the flow of electric
current through it. Conductance is denoted by the letter G and is reciprocal of
resistance. The unit of conductance is mho. A substance, which posses conductance
as its major property can be called as a good conductor.
30. What you mean by insulator? What are the qualities of good insulator?
A substance, which will not allow the flow of electric current to pass through it is
called the insulator. The conductance and conductivity is zero in insulators.
Insulators are used to isolate the electric current from neighbouring parts. Insulators
will not allow the leakage of current, short-circuiting current, shock to the operator
and isolates the electric current safely with out any diversion to any other place.
Qualities of good insulator
a. It should be flexible
b. It should have good mechanical strength
c. It should easily moulded into any shape
d. It should not be effected by acid
e. It should be non-inflammable
f. It should have very high specific resistance to prevent leakage current
g. It should be withstand high temperature. Because insulators posses negative temperature coefficient
of resistance. That is resistance decreases with increasing temperature
h. It should have high dielectric strength
Question and answers Electrical Maintenance Unit
- 9 -
31. What is electrode?
A conducting element used for converging (centering) current to and from a medium
is called electrode. There are two types of electrode. A positive and other is negative.
Question and answers Electrical Maintenance Unit
- 10 -
32. What is force?
Force is that which charge or tends to change a body state of rest or uniform motion
through a straight line. The unit of force is Newton.
33. What is Newton?
One Newton is that amount of force which acting on one-kilogram mass for one
second gives an acceleration 1 meter/sec/sec.
34. What is weight?
Weight is the gravitation force by which a body attracted to the earth. Gravitational
unit of force in M.K.S system is kilogram weight or 9.81 Newton.
Weight is the force with which 1-kilogram mass is attracted by the earth towards its
center.
35. What is bayer?
Bayer is the C.G.S unit of pressure and is equal to 1-dyne/cm2.
36. What is conductor?
Substances such as metals, which have large number of free electrons are said to
offer a low resistance to the flow of electrons under the influence of emf and hence
are called conductors.
Conductors are used to conduct electricity from one place to another place due to its
major property conductance. Conductors are classified into three main groups.
a. Good conductors.
b. Semi conductors.
c. Fair conductors.
37. What are the properties of good conductor?
Properties of good conductor
a. It posses very low resistance or specific resistance.
b. It posses more conductance and there by conducts electricity readily through it.
c. It is a good conductor of heat.
d. It is highly resistance to corrosion by liquid.
e. It must be malleable and ductile.
f. It must be flexible.
g. It posses better tensile strength.
h. It should not react with climatic conditions.
i. It can be drawn in very fine wires.
j. It must be readily joinable.
k. It must be very low in cost.
l. It must available in plenty.
Question and answers Electrical Maintenance Unit
- 11 -
37. What are the common conductors in sequence with high conductivity?
a. Silver
b. Silver copper alloy
c. Copper (Hard down and Annealed)
d. Gold
e. Zinc
f. Platinum
g. Tin
h. Aluminum
i. Iron
j. Brass
k. Phosphorous bronze
l. Nickel
m. Lead
n. Germanium silver
o. Antimony
p. Platinoid
q. Mercury
r. Bismuth
s. Platinum iridium
38. What is semiconductor?
Semiconductors posses less conductivity (conductance) than good conductors. That
is semiconductors gives opposition (resistance) to the flow of free electrons than that
of good conductor.
Examples for semiconductor are
a. Dilute acid
b. Metallic ores
c. See water
d. Moist earth
e. Silicone
f. Germanium
39. What is fair conductor?
Fair conductors are the materials, which have less conductivity than that of
semiconductor. Fair conductor gives more opposition to the flow of free electrons
than that of semiconductors.
Examples for fair conductors are
a. Charcoal
b. Coke
c. Carbon
d. Plumbago
40. What is resistor?
Question and answers Electrical Maintenance Unit
- 12 -
Resistors posses high resistance, but less conductance. This property is well utilized
to convert electrical energy into heat energy. Common application of resistors is
production of heaters. Examples are eureka, carbon, nichrome, tungsten, manganin,
germanium, and tentalum. In case of heaters, electrical iron and soldering iron etc the
heating element are made of nichrome, but in lamps filament is made of tungsten.
Question and answers Electrical Maintenance Unit
- 13 -
41. What is the difference between resistor, rheostat and potential divider?
Resistor: a fixed resistance connected permanently in the circuit for limiting the
current to definite value is called the resistor.
Rheostat: a variable resistance by sliding contacts on it the current can be varied is
called rheostat.
Potential divider: when a resistance is used to develop a voltage drop it is called a
potential divider.
42. What is solder?
Solder is an alloy of lead and tin mixed in different proposition as per the work to be
done. In some cases certain % of bismuth and cadmium is also added to decrease the
melting point of the solder. Antimony increases the melting point of the solder.
Bismuth has a special quality in comparing to most of other metals. That is it
expands when it cools. This property helps to shrink the solder and there by it allows
the joint become firm.
The quality of the solder depends on the % of tin in the solder. To get stronger joint
add more tin in the solder.
For electrical work fine solder of 1½ part tin and 1 part lead is used and for sheet
metal works soft solder of 1 part tin and 1 part lead is used.
43. What is flux?
Flux is a cleanser and is used to remove and prevent oxidation of the metals,
allowing the solder to flow from and to, to unite the solder more firmly with the
surface to be joined.
44. What is skin effect?
Electricity has affinity (fondness) to pass through peripheral surface of the
conductor. This effect of electricity flowing through the peripheral surface of the
conductor is known as skin effect.
45. What are the advantages of stranded cables?
a. It gives flexibility.
b. It prevents skin effect.
c. Increases current carrying capacity.
d. It provides easy in soldering joint.
e. If one strand breaks the other will carry the load current.
Question and answers Electrical Maintenance Unit
- 14 -
46. State the Ohm’s law.
In a closed electrical circuit, at a constant temperature, the ratio between the resulting
unvarying current or direct current and applied voltage is a constant. That constant is
known as resistance.
OR
In simple manner Ohm’s law says that, in a closed electrical circuit the current is
directly proportional to the voltage and inversely proportional to the resistance of the
circuit.
I = V/R or
R = V/I or
E = IR.
Ohm's Law / Power Formulas
P = watts
I = amps
R = ohms
E = Volts
47. What is series circuit? What are the characteristics of series circuit?
It is that circuit where two or more electrical consuming devices are connected so as
to provide only one path to the flow of current.
Characteristics of series circuit
a. It has only one path for the flow of current.
b. If any breakage happens the whole system will be out of that circuit.
c. It is very difficult to find the fault.
d. Individual voltage drop depends on individual resistance (V = I rn).
e. The total resistance of a series circuit is the sum of the individual resistance.
f. Addition of the resistance increases total resistance and decreases the current.
g. Individual device will not get its full efficiency.
Question and answers Electrical Maintenance Unit
- 15 -
48. What is parallel circuit? What are the characteristics of parallel circuit?
It is that circuit where two or more electrical consuming devices are connected so as
to provide as many parallel paths to the flow of current.
Characteristics of parallel circuit
a. As many parallel paths as there are devices.
b. Individual devices will get its full efficiency.
c. Breakage in one circuit will not affect the other circuit.
d. Current in each device is different according to the resistance of the device.
e. If the individual resistance increases the total resistance will decrease
(1/R = 1/ r1 + 1/ r2 +1/ rn)
f. The reciprocal of total resistance is equal to the sum of the reciprocal of
individual parallel resistances (1/R = 1/ r1 + 1/ r2 +1/ rn).
g. Individual conductance is inversely proportional to the individual resistance.
h. If two same value resistors are connected in parallel circuit the total resistance is
the resistance of one resistor. And the total of parallel circuit resistance will be
less than the least resistance in that circuit.
49. What is capacitor? On what factor capacity of a capacitor depends?
Capacitor or condenser is a device to store electrical energy and to release it into the
circuit of which the capacitor forms a part.
Capacity of a capacitor depends on following factors
a. Capacity of the capacitor is directly proportional to the area of the plate.
b. Capacity is inversely proportional to the distance between the plate. That is if the
distance is more the capacity decreases or if the distance is less the capacity more.
c. It depends on the nature of dielectric constant.
50. On what factor voltage rating of the capacitor depend?
The voltage rating of the capacitor depends on the distance between the plates of the
capacitor. If the voltage exceeds, the electrons across the space between the plates
can result in permanent damage to the capacitor.
51. What are the types of capacitor?
a. Paper capacitor.
b. Rolled plastic cover or polyester type capacitor.
c. Mica capacitor.
d. Silver mica capacitor.
e. Ceramic capacitor.
f. Electrolytic capacitor.
52. What is the resultant capacitance in series and parallel circuit?
In series circuit the resultant capacitance 1/CT = 1/c1+1/c2 + 1cn farad.
In parallel circuit the resultant capacitance CT = c1 + c2 + cn farad.
Question and answers Electrical Maintenance Unit
- 16 -
53. What is the formula to find the capacitance in a circuit?
C = Q/E farad.
Question and answers Electrical Maintenance Unit
- 17 -
54. What is work?
Work is said to be done, when the point of application of the force moves. Work
done is equal to force * distance. The unit of work is Newton (M.K.S system) and
joule (1 Newton Meter).
55. What is power?
Power is the rate of doing work or power is the work done per second.
Power = Work / time.
Unit of electrical power is watt. One mechanical horsepower is equal to 746 watts
(British) and 735.5 watts (metric) or 735.5 joules/sec. So 1 kW is equal to 1.34
horsepower (British) and 1.36 horsepower (metric).
56. What is energy?
Energy is the capacity to do the work. The unit of energy is joule or watt-second or
watt-hour or kilo watt-hour.
57. Define Joule’s law.
The heat generated in conductor (resistance) while the flow of current is directly
proportional to the square of the current, the resistance of the conductor and time for
which the current flows.
H = I2 R t/J calories.
Where J is mechanical equivalent of heat is equal to 4.2 Joules.
In electricity H = 0.24 I2 R t calories.
58. What is electrolysis?
When current passes through an acid or a salt, it de-composes and the two decomposed
portions tend to move in opposite direction. This process is called the
electrolysis.
Or the process of decomposing a liquid by the passage of electric current (DC)
through it is called the electrolysis or electric analysis.
59. What are the Faradays laws of electrolysis?
First law
The mass ions liberated at an electrode are directly proportional to the quantity of
electricity (coulomb Q) which has passed through the electrolyte. That is M∝Q or
M∝I t.
And M = Z I t.
Where Z is electro chemical equivalent.
Second law
If the same quantity of electricity passes through several electrolyte the masses of the
ions liberated are proportional to their respective chemical equivalent.
Question and answers Electrical Maintenance Unit
- 18 -
60. What is electro plating?
The process of depositing a metal on the surface of another metal by electrolysis is
known as electro plating. Usually the plating material will be silver, chromium etc.
Question and answers Electrical Maintenance Unit
- 19 -
61. What are the applications of electrolysis?
a. Electro plating.
b. Purification of copper and extraction of number of metals and number of
commercial compounds like sodium, hydrogen, hydroxide, oxygen etc.
c. Electro typing.
d. Determination of DC polarity.
e. Electro refining of metals.
62. State the laws of magnetism.
a. Magnet imparts its magnetic properties to other metals.
b. When a magnet is suspended freely horizontally, it stands at geographical north
and south.
c. Every magnet has a north and its associated separable South Pole.
d. If a magnet broken in any number of pieces, each piece will act as a separate
magnet having north and south poles.
e. Like poles repulse and unlike poles attracts.
f. The amount of attraction or repulsion is directly proportional to the pole
strength and inversely proportional to the square of the distance between them.
This is some times known as inverse square law.
63. What is flux density?
It is the flux passing per unit area in a substance through a plain at a right angle to
the flux. The letter ‘B’ denotes it and it is measured in Weber/cm2.
B = Q/a Weber/cm2.
64. What is magneto motive force?
The force, which drives the magnetic flux through a magnetic circuit, is called the
magneto motive force.
65. What is permeability?
Permeability of a substance is the conducting power for lines of force of magnetic
material as compared with the air.
66. What is reluctivity?
It is the specific reluctance of a magnetic circuit or magnetic material as in the case
of resistivity in an electric circuit.
67. What is reluctance?
It is the property of a magnetic material, which opposes the establishment of
magnetic flux in it, as in the case resistance in an electric circuit.
68. What is permeance?
Question and answers Electrical Maintenance Unit
- 20 -
It is the reciprocal of reluctance, which helps to develop or establish magnetic flux
easily in a magnetic material as in the case of conductivity in an electrical circuit.
Question and answers Electrical Maintenance Unit
- 21 -
69. What are the methods of magnetization?
a. Tough method
b. By means of electric current
c. Induction method
70. How the polarity of the magnet can be determined?
Polarity of the magnet can be determined by ‘End rule’ and ‘Palm rule’.
71. What are the advantages of electro magnetism?
a. Electro magnets can be magnetised very easily by sending DC through it.
b. Changing the direction of the current through the coil can change the polarity of
the poles.
c. The strength of the magnet can be controlled by the electric current.
d. Electro magnets can be made in any shape depending upon the need.
e. The magnetic strength remains constant as long as the current is constant.
72. State ‘Cork screw rule’ and ‘Right hand thumb rule’.
Cork screw rule
Direction of magnetic lines of force around a straight current carrying conductor can
be determined by these rules.
‘Cork screw rule’ says that, the direction of magnetic lines of force around a straight
current carrying conductor is the same as that in which the cork screw must be
rotated to cause to an advance in the direction of the current in conductor.
Right hand thumb rule
Grasp the conductor with right hand in such a way that the extended thumb must be
in the direction of current in the conductor. Then the folded fingers or encircling
fingers must be in the direction of magnetic lines of force around the conductor.
73. Who discovered electro magnetism?
‘Orsted’ a denish scientist discovered that whenever an electric current passes
through a conductor, a magnetic field will be produced around that conductor in
concentric circle. In addition to that heat will be produced in that conductor.
74. State the faraday’s laws of electro magnetic induction.
In 1831 Faraday discovered the production of electric current in electric conductor
by converting magnetism. Faraday has mentioned two laws known as faraday’s laws
of electro magnetic induction.
First law
Whenever a conductor causes to cut the magnetic lines of force an emf will be
induced in that conductor.
Second law
Question and answers Electrical Maintenance Unit
- 22 -
The quantity of electricity or the value of the emf produced in that conductor is
directly proportional to the rate of change of flux linked with that conductor.
Question and answers Electrical Maintenance Unit
- 23 -
75. How we can find the direction of induced emf?
The direction of induced emf can be find out by the ‘Fleming’s right hand rule’, and
‘lenz’s law’
Fleming’s right hand rule
Fleming’s right hand rule states that, if one extends the thumb, fore finger and
middle finger of the right hand at right angle to each other in such a way that the
thumb point in direction of motion of the conductor, the fore finger in the direction
of flux (from north to south pole), then the middle finger is indicate the direction of
the induced emf in the conductor.
Lenz’s law
The lenz’s law states that, electro magnetically induced current always flows in such
a way or direction that the action of magnetic field set up by induced current tends to
opposes the root cause which produces it.
76. What is eddy current?
Eddy currents are those which are produced or induced in the mass of metal
whenever the metal are moved in magnetic field of the magnetic field is moved
across the mass metal so as to link it. The direction of this eddy current is always in
opposite direction to the cause to produce them as per lenz’s law.
Eddy current can be calculated by following equation
We = k Bmax
2 f2 t2 v watt.
Where k – Constant
Bmax – Maximum flux density
f – frequency of magnetic reversal
t – thickness of each lamination
v – volume if the armature core or mass metal.
Development of eddy current is made use in energy meters to provide controlling
torque and also in form of automatic starters in moving coil measuring instruments.
77. What is magnetic Hysteresis?
Lagging of magnetization or induction flux density ‘B’ behind the magnetising force
‘H’ is known as magnetic hysteresis.
78. What are the types of induced electro motive force?
a. Dynamically induced emf.
b. Statically induced emf.
Statically induced emf can be further divided into two groups.
a. Mutually induced emf.
b. Self induced emf.
Question and answers Electrical Maintenance Unit
- 24 -
79. What are the use of mutual induction and self-induction?
Use of mutual induction
a. Transformers are works on this principle.
b. An inductance furnace makes use of it.
c. Used in ignition coils of motor car, motor cycles, scooters etc.
Use of self-induction
a. In regulators to give reduced voltage to the fans.
b. In fluorescence tube light to give high voltage at the time of starting and to give
law voltage at it’s normal working time.
c. Used in welding plant rectifiers to keep arc stationary by smoothing choke.
80. What are the different methods used to measure the resistance?
The different methods developed to measure the resistances are as follows.
a. Wheat stone bridge.
b. Slide wire bridge.
c. Post office box.
d. Ohm meter.
e. AVO meter or multi meter.
f. Bridge megger.
g. Megger.
81. What is generator? What are the essential parts of the generator?
Generator is a machine, which converts mechanical energy into electrical energy.
A generator works on under the principle of faraday’s laws of electro magnetic
induction.
It’s essential parts are conductor, magnetic field and the movement of either the
conductor or the magnetic field so as to create a rate of change of flux linkage with
the conductor by the action of applied mechanical energy.
82. What is the equation used to find out frequency of number of cycles of induced emf?
f = NP/120
83. What are the types of generators?
There are two types of generator.
a. Permanent magnet generator.
b. Electro magnet generator.
In electro magnet generator there are two types.
a. Self excited generator.
b. Separately excited generator.
Question and answers Electrical Maintenance Unit
- 25 -
84. What are main types of DC generator?
Mainly there are three types.
a. Series generator or series wound generator.
b. Shunt generator or shunt wound generator.
c. Compound generator.
There are different types of compound generator.
a. Short shunt commulative compound generator.
b. Short shunt differential compound generator.
c. Long shunt commulative compound generator.
d. Long shunt differential compound generator.
Depending upon the terminal voltage characteristics there are three types of
compound generator.
a. Under compound generator.
b. Flat or level compound generator.
c. Over compound generator.
85. What is the emf equation for generator?
emf = P * φ * Z * N / A * 60
Where,
φ = Flux per pole in Weber.
Z = Total number of armature conductors.
P = Number of poles.
A = Number of parallel paths in armature.
N = Speed in rpm.
emf = emf generated in one parallel path and it is the emf generated of that generator.
For a wave wound generator there are only two (2) parallel paths in the armature. In
such cases A=2 and in lap wave wound armature parallel paths is equal to the
number of poles in the armature winding.
86. What are the losses in DC generator?
There are two main losses.
a. Copper losses or electrical losses.
b. Stray losses or rotational losses or constant losses.
Copper losses includes following losses
a. Armature copper losses (Ia
2 ra).
b. Field copper losses (Ise
2 rse) or (Ish
2 rsh).
c. Losses in brush.
Stray losses are as follows
a. Magnetic losses (Iron loss or core loss).
b. Mechanical losses.
Question and answers Electrical Maintenance Unit
- 26 -
87. What is efficiency of generator?
Efficiency = Out put / input
= Out put / out put + losses
Question and answers Electrical Maintenance Unit
- 27 -
88. What is armature reaction?
Armature reaction is the effect of armature flux on the main field flux.
The effects of armature reaction are follows.
a. Armature reaction destroys (cross magnetizes) and weakens the main field flux
produced by the main pole.
b. It causes to reduce the induced emf in the armature.
c. It causes to reduce the efficiency of machine.
d. It causes to produce sparking at the brushes due to the shifting of M.N.A
(magnetic neutral axis).
e. At short-circuited loads or at very heavy loads, in case of self-excited generators
de-magnetising of pole cores (wiping of residual magnetism) may takes place.
89. What are the remedies for armature reaction?
a. Brushes have to shift to new M.N.A position in the direction of rotation of
armature.
b. To over come the weakening of the field extra turns have to be added in armature.
c. Pole shoes have to modify at trailing pole tip side to increase the reluctance.
d. Pole shoes have to modify to increase the reluctance.
e. In big machines there is chance of load fluctuation, a compensating winding to be
placed at the pole shoes and it is connected in series with the armature winding
such that the current in that winding is opposite to the armature winding.
90. What is commutation?
Usually the width of the brush is equal to the two segments of the commutator.
Whenever a brush contacts two or more commutator segments, the connected to
those segments are short-circuited. After the period of short-circuiting the current on
those coils changes their current direction in it. The change that takes place in the
coil after the period of short-circuiting of that coil is called commutation.
When that changes take place slowly, that commutation is known as smooth
commutation and when that changes take place suddenly, that commutation is known
as rough commutation.
If the commutation is not smooth, the spark may be more and that will damage the
commutator surface, commutator segments and so the winding.
The remedies for rough commutation are resistance commutation method and emf
commutation method.
91. What are the characteristics of DC generator?
There are three main characteristics of DC generator and they are,
a. No load saturation characteristics or OCC or magnetic characteristics (E0/If).
b. Internal or total characteristics (E/Ia).
c. External characteristics (V/I).
Question and answers Electrical Maintenance Unit
- 28 -
92. What is motor? How DC motor works?
A motor is a machine, which takes electrical energy and converts that electrical
energy into mechanical energy.
DC motor works under the principle, that whenever a current carrying conductor
placed in a magnetic field, a mechanical force will be acts upon that conductor and
the conductor tends to rotate, if it is arranged freely to rotate.
The direction of the force or rotation can be determine by “Fleming’s left hand rule”
93. What is torque?
Whenever a current carrying conductor placed in a magnetic field, a mechanical
force will be acts upon that conductor and the conductor tends to rotate, if it is
arranged freely to rotate. This rotation is due to the turning or twisting force acted on
that conductor. This turning or twisting movement of a force about an axis is called
torque ‘T’.
T = force * radius Newton-meter.
Work done per revolution = force * distance covered in one revolution.
∴ Work done per revolution = force * 2πr.
Work done per second = force * 2πr N (r.p.s)
Work done per second = 2π N T (äT = F * r)
So power developed in metric horsepower is equal to force 2πNT/735.5 hp.
94. What are the classifications of DC motor?
a. DC series motor.
b. DC shunt motor.
c. DC compound motor.
There are two types of DC compound motor.
a. Differential compound motor.
b. Commulative compound motor.
95. What are the losses in DC motor?
The losses in DC motor are same as that of DC generator. They are copper losses,
magnetic losses and mechanical losses.
96. What are the characteristics of DC motor?
The characteristics of DC motor shows the relation between armature current (Ia),
speed (N) and torque (T).
a. Torque and armature current characteristics. It is also known as electrical
characteristics.
b. Speed and armature current characteristics.
c. Speed and torque characteristics.
Question and answers Electrical Maintenance Unit
- 29 -
97. What is the necessity of DC motor starter?
Eb = V – Ia ra.
∴ Ia = V – Eb / ra.
At the time of starting from the rest there is no any back emf (Eb) in the armature. So
a large current flows through the armature based on V / ra. This very large current
blow out the fuses and before to that it will damage the commutator, commutator
brushes and winding. To avoid this difficulties a proper resistance has to be
introduce in series with the armature till the motor reaches it’s rated speed or till
development of Eb in the armature to reduce the starting large current to safe value.
This starting resistance is gradually cut out as the motor gains speed and the
develops back emf (Eb) which regulates it’s speed and armature current. This can be
achieved by the help of starter.
98. What are the types of DC motor starter?
a. DC two point starter for series motor.
b. DC three point starter for shunt motor.
c. DC four point starter for compound motor.
99. How speed control of DC motor can be achieved?
Induced emf in the armature E = P * φ * Z * N / A * 60 volts.
Where Z and A are constant.
N ∝ Eb / φ
N ∝ V – Ia ra / φ.
We can consider that the Ia ra drop is very small and there by in the place of V – Ia ra
we can consider only V. If it so then N ∝ V/ φ.
So speed may be varied by varying either applied voltage to the armature and by
varying field flux or field strength per pole or total field flux.
100. What is cell?
Cell is one unit for converting chemical energy into electrical energy. A cell
essentially requires two electrodes, electrolyte and container.
101. What is battery?
The combination of two or more cells is called the battery.
102. What are the classifications of cell?
a. Primary cells.
b. Secondary cells.
Question and answers Electrical Maintenance Unit
- 30 -
103. What are the differences between primary cell and secondary cell?
Primary cells are those cells, which cannot be re-charged after the substances
(electrolyte, electrode and container) used in it becomes useless.
The common primary cells in use are,
a. Simple voltaic cell (one fluid cell).
b. Daniel cell (two fluid cell).
c. Leclanche cell (two fluid cell).
d. Dry cell.
e. Standard cell or Weston cadmium cell.
Secondary cells are those cells, which can be re-charged and use again once they
discharged or used for the work for number of times with out re-newing it’s
materials.
Most commonly used secondary cells are,
a. Lead acid cell.
b. Nickel iron alkaline cell.
c. Nickel cadmium alkaline cell.
104. What is polarization? What is local action?
Polarization
The hydrogen bubbles which are clinging over the surface of copper electrode
(anode) becomes a thin film of hydrogen over the copper electrode. This hydrogen
film increases the internal resistance and reduces the emf of the cell and hence the
cell soon becomes inactive. This effect is known as polarization.
Local action
In voltaic cell it is observed that, when the cell is not connected to the load and not
supplying any current zinc will continuously dissolving in the electrolyte. This is
due to the impurities (copper, iron, tin, and lead) in the commercial zinc. So that
whenever commercial zinc is used as a electrode, separate small cells are
developed between the impurities and zinc with the presence of electrolyte. These
local cells consume always zinc and the emf developed by those local cells are
always opposite to the main emf. The action of these cells is known as local action.
105. What are the advantages of secondary cells over primary cell?
a. It gives high current capacity.
b. Its internal resistance is very low.
c. It gives a constant current.
d. It posses very high efficiency.
e. It posses fairly constant emf.
f. It posses good mechanical strength.
g. It posses large storage capacity.
Question and answers Electrical Maintenance Unit
- 31 -
h. It can be renewed by charging after it is discharge.
i. It is durable.
Question and answers Electrical Maintenance Unit
- 32 -
106. What is Plante plate and Faure plate?
There are two types of positive plate preparation. They are Plante plate and Faure
plate.
Plante plate
As per plante process positive plate PbO2 are prepared by a process of repeated
charging and discharging of pure lead. Positive plates, which are made by this
process, are also called ‘formal plates’. This process of positive plate preparation
required very long time for it’s manufacturing and so it is very costly.
Faure plate
Faure plates are generally made up of rectangular lead grid into which the active
material lead peroxide PbO2 is filled in the form of paste.
107. How negative plate is made up of?
The negative plate of a lead acid cell is made up of spongy lead ‘Pb’. The negative
plates are also of rectangular lead grid and the active material Pb in the form of
paste is held firmly in this lead grid.
108. Why negative plates are one more than positive plates?
Negative plates are one more than positive plates so as to get negative plates on
both the sides of positive plates. This is to prevent the buckling action of the lead
on positive plate in the multi plate lead acid cell. The other reason is that both the
sides of positive plates will become active and the efficiency of the positive plate
and the cell will increase.
109. What is electrolyte?
Electrolyte is the medium through which the current produces chemical changes.
Electrolyte is a mixture of sulphuric acid o 1.85 specific gravity (concentrated
sulphuric acid) diluted with distilled water in the ratio of 1:3 approximately, so the
specific gravity of the dilute sulphuric acid is 1.280.
110. What are the types of grouping of cells?
There are three main ways of grouping.
a. Series grouping.
b. Parallel grouping.
c. Series parallel grouping.
Question and answers Electrical Maintenance Unit
- 33 -
111. What are the advantages of series grouping and parallel grouping?
Advantages of series grouping.
a. The total emf increases and is equal to ‘nE’. Where n – total number of cells in
series and E – emf of one cell.
b. The internal resistance ‘r’ also increases and equal to ‘nr’. So total resistance of
the circuit also increases and is equal to R + nr ohms. Where R – external load
resistance.
c. Total current is equal to one cell current. That is there is no current increase. If
the internal resistance is negligible or less then current will be maximum.
Advantages of parallel grouping.
a. In parallel grouping emf of one cell will be the total emf of the grouping.
b. Total internal resistance of the parallel group is equal to r/n.
c. Total resistance of the group is equal to R + r/n.
d. Total current = E / (R +r/n) amps.
So we can understand that parallel useful when the external resistance is small as
compared to internal resistance of the parallel group. But at the same time series
grouping is useful when the internal resistance is small compared to the external
resistance of the group.
112. What are the methods of charging of battery.
Mainly there are three types of charging of battery.
a. Constant current charging system.
In this system the charging current is kept to constant by varying the supplied DC
voltage by the help of rheostat or filament lamps in series with the battery, so as to
over come the increased back emf of the battery or of the cell.
Charging current = V – Eb / R + r amps.
b. Constant voltage or potential charging.
In this system the voltage is kept to constant, so the charging current in the
beginning will be high when the back emf or counter emf of the battery is low and
current will be small when the back or counter emf increases as the battery gets
charge.
c. Trickle charging system.
The continuous charging of a battery at a very low rate for keeping the battery
ready in good working condition is called the trickle charging. This is to maintain
the losses occurring at the idle period. The value of the trickle charging current is
approximately 2% of the full charging current of the battery.
Question and answers Electrical Maintenance Unit
- 34 -
113. What are the factors on which the capacity of the battery depends?
The capacity of the battery is measured in ampere-hour. The capacity of the battery
depends upon the following factors.
a. Number and area of the positive plate.
b. Discharge voltage. A cell should not be discharged below 1.8 V. If it is
discharged below 1.8 V it may cause to reduce the capacity.
c. Discharge rate. Capacity decreases with increase rate of discharge.
d. Specific gravity of electrolyte. With rapid rate of discharge causes to weaken
the electrolyte so the chemical action also weakens and there by the capacity
decreases. When the specific gravity increases the capacity of the battery
increases.
e. Quantity of electrolyte. Electrolyte level should be at the top plate level.
f. The design of separator. The design of the separator should be thin.
g. Temperature. When the temperature increases the resistance of the battery
decreases and the capacity increases.
114. Explain Kirchhoff’s laws.
Kirchhoff’s laws are used in complex network circuits to determine the equivalent
total resistance and the current flowing in various conductors of that circuit.
Mainly there are two laws.
a. Point law or current law.
b. Mesh law or voltage law.
Point law or current law.
The point law states that, the algebraic sum of the currents meeting at any point or
junction or node of a network is zero. In other words the sum of the currents
flowing towards the junction or node or any point of network is equal to the total
current flowing away from that junction.
Mesh law or voltage law.
The mesh law states that, in any closed electrical circuit the algebraic sum of the
potential drops is equal to the sum of the impressed emf’s acting in that close
circuit. In this the important factor is to determine the emf sign to calculate the total
emf.
115. What are the types of wiring?
Mainly there are two types of wiring systems.
a. Tree system.
b. Distribution system.
116. What are the systems of wiring?
Following are the general systems of domestic wiring and industrial wiring.
a. Cleat system wiring.
b. Casing and capping system wiring.
Question and answers Electrical Maintenance Unit
- 35 -
c. Lead sheathed system wiring.
d. C.T.S, T.R.S, P.V.C sheathed system wiring.
e. Conduit system wiring.
Question and answers Electrical Maintenance Unit
- 36 -
117. What are the testing of wiring installation?
Following are the tests to be done after installation of wiring.
a. Polarity test.
b. Short circuit test.
c. Continuity test.
d. Insulation test between conductors and conductors to the earth.
e. Earth continuity test.
118. What are the advantages of AC over DC?
a. For the same capacity alternators are cheaper than DC generators, because
alternator is not having commutator arrangement and there by small in size.
b. Alternating current produces pulsating magnetic field and there by it posses the
property of inductance and capacitance.
c. Alternating current can be step-up or step-down by static transformer.
d. AC can be transmitted with very less cost in comparing to DC transmission.
e. Alternating line losses are very less comparing to DC line losses.
f. An alternators and AC motor requires very less maintenance.
g. Charge per unit for AC is less than DC.
119. Define AC.
Alternating current is that type of electric current, which changes it’s magnetude
and direction periodically.
120. What is cycle?
One complete set of changes in value and direction of alternating quantity and emf
or current is called a cycle.
121. What is periodic time?
Periodic time is the time taken to complete on cycle. Its symbol is ‘T’. For example
Indian standard frequency is 50 cycles per second. So the periodic time T = 1/50
seconds. That is equal to 20 m seconds.
122. What is frequency?
Number of cycles per second is called frequency.
123. What is amplitude value or peak value?
It is the maximum value of an alternating quantity that can be obtained in any one
direction.
124. What is instantaneous value?
The value of an alternating quantity at a particular instant is called instantaneous
value.
Question and answers Electrical Maintenance Unit
- 37 -
125. What is average value or mean value?
Average of all instantaneous values of emf or current over a half cycle is known as
average value or mean value.
Average value = 0.637 * Emax or Imax
126. What is root mean square value (R.M.S)?
The R.M.S value is also known as effective value or virtual value. The
instantaneous value of both the directions will all be squared up and will be added
together. Then divide to get the average with the number of instantaneous values
and find the square root of this average to calculate the R.M.S value of the emf or
current.
Or
The R.M.S value of an alternating current or emf is equal to the same value of
direct current (DC), which produces the same amount of heat with the same time
when applied the DC through the same circuit as AC is produced.
R.M.S value = maximum value / √2 = 1/√2 = 0.707.
∴ R.M.S value or effective value = 0.707 * Emax or Imax
127. What is form factor?
The ratio of the R.M.S value to the average value is called the form factor.
∴ Form factor = 0.707 * Emax or Imax : 0.637 * Emax or Imax
= 0.707 * Emax or Imax / 0.637 * Emax or Imax
= 1.11
So that R.M.S value = average value * 1.11
Or average value = R.M.S value / 1.11
128. What is crest factor or peak factor?
The ratio of maximum value to the R.M.S value is known as crest factor. So the
crest factor = maximum value / R.M.S value.
= Emax or Imax / (Emax or Imax / √2)
= Emax or Imax * √2 / Emax or Imax = √2 = 1.414
129. What is vector quantity and what is scalar quantity?
Vector quantity
A quantity, which has both the direction and magnitude is said to be a vector
quantity. Examples are force, emf, current etc.
Scalar quantity
A scalar quantity is that, which has only magnitude but no direction. Examples are
temperature, mass, volume etc.
130. What is phase?
Question and answers Electrical Maintenance Unit
- 38 -
The development of an AC quantity through different stages is known as Phase.
The term phase refers to the number of separate individual voltage setup in an AC
circuit.
131. What is in-phase?
When those two vectors (voltage and current) attain (reaches) their maximum and
minimum values simultaneously (at the same time), then those two quantities are
said in-phase. Here between those quantities there is no angle.
Question and answers Electrical Maintenance Unit
- 39 -
132. What is out of phase?
When two alternating quantities voltage and current do not reaches their maximum
and minimum values simultaneously, then they are called out of phase.
133. What is phase angle?
Phase angle is an angular displacement between two alternating quantities. Phase
angle is measured in electrical degrees or radians.
134. What is quadrature quantity?
When the phase angle between two vectors is 90° electrical, then they are said to be
quadrature quantity.
135. What anti-phase quantity?
When two quantities are out of phase by 180° electrical, then they are said to be
anti-phase quantities.
136. What is leading quantity?
The alternating quantity that reaches its maximum value earlier than the other
quantity is known as the leading quantity.
137. What is lagging quantity?
The alternating quantity that attains its maximum value later than the other quantity
is called the lagging quantity.
138. What is the relation between voltage and current in AC circuit containing only
resistance?
Current (I) is in-phase with the voltage.
I = V/R amps.
P = I * V * cosϕ or I2 R watts. (Where cosϕ is zero because the voltage and current
are in-phase. So cosϕ 0° (zero) = 1)
139. What is the relation between voltage and current in AC circuit containing only
inductance?
Current (I) is lags behind the voltage by 90°.
I = V/XL amps.
XL = 2πfL ohms.
P = I * V * cosϕ watts. (Where cosϕ is 90 because current lags behind voltage by
90°. So cosϕ 90° = 0)
∴ P = I * V * 0 = 0 watts.
Question and answers Electrical Maintenance Unit
- 40 -
140. What is the relation between voltage and current in AC circuit containing only
capacitance?
Current (I) is leading the voltage by 90°.
I = V/XC amps.
XC = 1/2πfC ohms.
P = I * V * cosϕ watts. (Where cosϕ is 90 because current is leading the voltage by
90°. So cosϕ 90° = 0)
∴ P = I * V * 0 = 0 watts.
141. What is inductance and inductive reactance?
Inductance
A coil carrying alternating current produces an alternating flux, which causes to
link with same coil and produces an emf in the coil, which opposes the applied
emf. This property is known as inductance. The unit for measurement is henry.
Inductive reactance
The opposition or the reactance offered by the property of inductance in the circuit
is known as inductive reactance and denoted by the letter XL. The unit for
measurement is ohm.
142. What is capacitance and capacitive reactance?
Capacitance
The property of a capacitor to store electrical energy in it, when it is connected to
an electric supply is called capacitance. Unit for measurement is farad. Capacitor
store an electric energy in the unit of charge and the unit of charge is coulomb.
Capacitive reactance
The opposition due to capacitance of capacitor in an electric circuit is called
capacitive reactance and it denoted by the letter XC. The unit for measurement is
ohm.
143. What is impedance?
The total opposition offered by an AC circuit for the flow of current through it is
called Impedance. The letter ‘Z’ denotes it and the unit is ohm.
∴ Z = √ R2 + (XL ∼ XC) 2
Z = √ R2 + (X) 2
Where ∼ indicates the difference of XL and XC and denoted in the letter X (net
reactance of the AC circuit).
144. What is ohm’s law for AC circuit?
I = V/Z amps.
Z = V/I ohms.
V = I * Z volts.
Question and answers Electrical Maintenance Unit
- 41 -
Question and answers Electrical Maintenance Unit
- 42 -
145. What is the current and power in an AC circuit?
Current
AC circuit contains resistance ‘R’ and reactance ‘X’.
In resistive circuit IR = I cosϕ. Because resistance current (IR) is in-phase with
voltage (ER).
In reactance circuit IX = I sinϕ. Because reactance current will lead or lag the
voltage (ER) by 90°.
So the resultant current (I) is the vector sum of I cosϕ and I sinϕ. So that circuit
current I = √ (I cosϕ)2 + (I sinϕ)2 amps.
I cosϕ is some times known as power component of current or the power current or
energy current and the I sinϕ is known as reactive component of current or wattless
current. Because I sinϕ is not taking any energy from the circuit.
Power
Power in watts = terminal voltage * power component of current.
a. True power = E * I * cosϕ watts.
This true power is some times known as energy component or active
component or watt-full component. Because this is the power used to produce
torque in motor and supplies heat, light etc. or this true power is the power
consumption of all source of electric circuit.
b. Reactive power = E * I * sinϕ watts.
This reactive power is some times known as reactive or in-active component or
watt less component or VARS.
c. Apparent power = E * I watts.
The terminal voltage multiplied by the actual resultant current (I) is called the
apparent power or volt-ampere or VA.
146. What is power factor?
So from the above power explanation,
Cosϕ = true power / apparent power = E * I * cosϕ / E * I.
So that power factor is equal to
a. Cosine of angle of lead and lag of the resultant current with the applied voltage.
b. The ratio of R/Z.
c. The ratio of true power to the apparent power.
Question and answers Electrical Maintenance Unit
- 43 -
147. What is resonance in series circuit?
If in an AC circuit inductive reactance XL and capacitive reactance XC is equal the
voltage across both will be equal and are 180° out of phase. So that each will
cancel each other and the current limiting component will be the resistance of the
circuit.
If we are in a position to alter the frequency of supply voltage at a particular
frequency named as ‘resonant frequency’, AC series circuit’s XL = XC and the net
reactance will be zero. So the current in the circuit is in-phase with the voltage.
Because the controlling component of the circuit is resistance only and the current
is maximum and equal to V/R amps.
This above said condition is called ‘series resonance’ and the frequency at which it
occurs is called resonant frequency and the resonant frequency (FR) is equal to
(FR) = 1/2π√LC cycles per second.
148. What is Q-factor?
The ratio of VL/V or VC/V at the resonant frequency is called the voltage
magnification denoted as Q-factor.
Q-factor = 1 √L/C
R
149. What is Admittance?
Admittance: Admittance is the reciprocal of impedance. It is denoted by the letter
‘Y’ and the unit of measurement is mho.
Y = I/E = RMS current / RMS voltage.
Equation used in admittance
a. Conductance ‘G’ = Y * cosϕ = 1/Z *R/Z = R/Z2 mho.
b. Susceptance ‘B’ = Y * sinϕ = 1/Z * X/Z = X/Z2 mho.
c. Admittance ‘Y’ = √G2 + B2 mho.
d. In special cases when X = zero, then G = 1/R and R = zero, then B = 1/X.
150. What is the resonance frequency equation for parallel circuit?
In parallel circuit when XC = XL, the circuit is called the parallel resonance circuit.
That is 2πfL = 1/2πfC.
In term (FR) = 1/2π√1/LC – R2/L2 cycles per second.
If ‘R’ is negligible, then (FR) = 1/2π√LC cycles per second.
151. What is poly phase?
A system with two or more the two phases is known as poly phase system.
152. What is phase sequence?
Question and answers Electrical Maintenance Unit
- 44 -
The sequence of attaining the maximum value of the induced emf in each set of
winding among those three sets is known as phase sequence. This phase sequence
is usually indicated by the letters R, Y, B.
153. What is phase voltage?
The voltage between one of the phase and neutral is known as phase voltage and it
is denoted by VPh.
Question and answers Electrical Maintenance Unit
- 45 -
154. What is line voltage?
The voltage across any two phases of the supply system is called line voltage and it
is denoted by the letter VL.
155. What is phase current?
The current flowing through any of the phase winding is known as phase current
and it is denoted by IPh.
156. What is line current?
The current flowing between any two phases of the winding is called line current
and it is denoted by the letter IL.
157. What is balanced load and unbalance load?
Balanced load
In a three-phase system the power factors and the phase current or line currents of
the 3-phase are equal, then that load is called balanced load.
Unbalance load
If the three-phases have different power factors and the phase current, then the load
is called the unbalance load.
158. What is phase power and total power?
Phase power
The power measured between a phase and neutral is known as phase power.
Total power
The total power measured between the three phases is called total power.
159. What are the methods of connecting 3-phase windings?
There are two methods.
a. Star or wye (Y) connection.
b. Delta or mesh (<) connection.
160. What are the value of voltage and current in star connection and in delta
connection?
Star connection
a. IL = IPh.
b. VL = √3 VPh. ∴ VPh = VL/√3.
Note: in star connection we are getting neutral point and we can able to measure
the phase as well as line voltage.
Delta connection
a. VL = VPh.
b. IL = √3 IPh. ∴ IPh = IL/√3.
Question and answers Electrical Maintenance Unit
- 46 -
Question and answers Electrical Maintenance Unit
- 47 -
161. What is the power in 3-phase supply system?
In a single-phase system power ‘P’ = VPh * IPh * cosϕ watts.
In 3-ϕ system power ‘P’ = 3 * VPh * IPh * cosϕ watts.
In Star connection, IL = IPh and VPh = VL/√3. Substituting the value of IPh and VPh
in the above 3-ϕ power equation,
P = 3 * VPh * IPh * cosϕ watts.
P = 3 * VL/√3 * IL * cosϕ watts.
P = √3 * VL * IL * cosϕ watts.
In Delta connection, VL = VPh and IPh = IL/√3. Substituting the value of IPh and VPh
in the above 3-ϕ power equation,
P = 3 * VPh * IPh * cosϕ watts.
P = 3 * VL* IL/√3 * cosϕ watts.
P = √3 * VL * IL * cosϕ watts.
So that the power in three phase supply system whether star connected or delta
connected is same and power P = √3 * VL * IL * cosϕ watts.
So cosϕ = P/ √3 * VL * IL .
162. What are the advantages of rotating field system?
a. For rotating field alternators only two slip rings and brush gear assembly are
required irrespective of number of phases.
b. The DC excitation voltage is low and it is very easy to insulate. This intern
reduces the size of the machine.
c. Out put current can be taken directly from the fixed terminals on the stator. It is
easy to insulate high voltage stationary stator (armature).
d. The armature winding can be easily braced to prevent any deformation
produced by the mechanical stress set as a result of short circuit current and the
high centrifugal brought into play.
163. What are the types of alternator?
Depending upon the speed there are three types.
a. Low speed. b. Medium speed. c. High speed.
Depending on rotation there are two types.
a. Armature rotating b. Field rotating.
Depending on number of phases there are two types.
a. Single phase b. Poly phases.
With respect to excitation there are two types.
a. Self excited b. Separately excited.
Question and answers Electrical Maintenance Unit
- 48 -
Question and answers Electrical Maintenance Unit
- 49 -
164. What is the voltage equation for alternator?
165. What is voltage regulation?
166. How alternators are rated?
Alternators are rated in kVA.
167. What are the losses in an alternator?
Losses in alternators are same as DC generator and they are as follows.
a. Copper losses includes following losses
Armature copper losses (Ia
2 ra).
Field copper losses (Ife
2 rf).
Losses in brush.
b. Stray losses are as follows
Magnetic losses (Iron loss or core loss and pole shoes loss).
Mechanical losses includes bearing friction, slip ring friction and friction due to
windage.
168. When the efficiency of the alternator is maximum or on what factor the efficiency
of the alternator depends?
Efficiency of an alternator depends on its load power factor for a given load. As
the power factor decreases Ia increases and the copper losses increases and thus
efficiency decreases. The efficiency for given load is maximum only when the
power factor is unity and it decreases as the power factor fall.
169. What are the methods of synchronizing?
a. Lamp method.
Dark lamp method and bright lamp method.
b. Synchroscope method.
170. What is synchroscope?
Synchroscope is an instrument, which shows the phase relationship of emf of the
incoming alternator and at the same time it also indicates whether it is running slow
or fast. This instrument works on the principle of rotating magnetic fields. It
consists of a small motor with rotor and stator. Both wound for two phase. A
potential transformer connected to two of the main bus-bar give supply to the stator
‘A’ winding and another potential transformer of same type connected to the
corresponding terminals on the incoming machine supply to the stator ‘B’ winding.
The rotor rotates if the stator resultant flux in the ‘A’ and ‘B’ is different and the
exact time of synchronizing is the stand still position of the rotor. That means the
both the voltages in winding ‘A’ and ‘B’ are same and there is no resultant flux to
rotate the rotor. The speed of the rotor depends on the frequency of the alternator
Question and answers Electrical Maintenance Unit
- 50 -
and is too fast when alternator (incoming machine) speed is more and less when
alternator is too slow.
Question and answers Electrical Maintenance Unit
- 51 -
171. What is transformer?
Transformer is a static device by which AC power at one voltage in one circuit will
be transformed into AC power of same frequency at another (decreased or
increased voltage) or same voltage to an another circuit, which is in mutual
inductive influence with the previous circuit and it is based on mutual electro
magnetic induction.
172. What are the purposes or advantages of transformer?
Purposes
a. Electrical energy may be transmitted economically over long distance by
stepping up of voltages to reduce the line losses.
b. To distribute the low voltages at consumer side by stepping down the voltages.
Advantages
a. Transformer is a static machine and losses are very less. There by efficiency is
high and about 95 to 98%.
b. Practically maintenance is very less.
173. What is the working principle of transformer?
A transformer works under the principle of mutual electro magnetic induction
(Faraday’s laws of Electro-magnetic induction). It says that, when ever a changing
flux links with a coil an emf is induced in it and this induced emf is proportional to
the rate of change of flux and the number of turns in the coils linking the flux.
174. What are the types of transformer core?
a. Core type transformer core.
b. Shell type transformer core.
c. Berry type transformer core.
d. Spiral type transformer core.
175. What is the transformation ratio in transformer?
Equation for transformation ratio is,
E2/E1 = N2/N1 = k
k = >1 in step up transformer, where secondary turns are more and thus voltage is
more to reduce the transmission current.
k = <1 in step down transformer, where secondary turns are less than primary and
low voltage for consumer use.
If we include the current in transformation ration the equation is,
E2/E1 = N2/N1 = I1/I2 = k
176. What is the use of conservator in the transformer?
It is a drum type cylinder mounted on the top of the transformer through a small
pipe. … of the conservator is kept empty. To indicate the level of oil in the
Question and answers Electrical Maintenance Unit
- 52 -
transformer an indicator is fixed. Conservator will help the oil inside the tank by
providing sufficient space to expand and to contract as its temperature varies
without exposing much surface area. That is it limits the air with oil due to its less
surface area.
Question and answers Electrical Maintenance Unit
- 53 -
177. What is the use of breather in the transformer?
Breather is a bottle shaped steel tube, which is attached to one side of conservator
to allow the air to pass in and out of the tank or conservator through the calcium
chloride and silica gel, which is filled in it to absorb the moisture contained in the
air. When the silica gel absorb the moisture its colour changes from blue to pink.
178. What is the use of buchholz relay in the transformer?
It’s a protection relay used in oil immersed transformer to protect the transformer
from insulation failure, core heating or any other type of internal faults, which may
cause the heating of winding beyond the specified temperature. This relay is placed
in between the pipe connecting the conservator and the tank. Generally used in
power transformer of above 500 kVA.
It consists of two operating floats and is operated by two mercury switches
separately provided for the alarm and trip. Due to internal fault (collection of gases)
or leakage of oil if the oil level comes down the alarm relay first operates and then
the trip relay operates to isolate the transformer from the circuit.
179. What is the use of explosion vent in the transformer?
It is also a safety device of a transformer, which protects the transformer tank from
the high consequences of the high-pressure gases induced or developed by any type
of short circuit in the transformer by allowing the gas to escape by puncturing the
diaphragm.
180. What is the emf equation for transformer?
Always maximum flux reaches from zero to maximum in one quarter of the cycle.
That is in … of second. That is equal to 1/200 second.
Average rate of change of flux = Qm / … f. = Qm * 4 * f.
= 4 f Qm Weber / second.
As the coil has N turns the average emf induced in the coil = 4 f Qm N volts.
But the rms. Value = average value * form factor.
∴ rms. Value of emf = 1.11 * 4 f Qm N volts.
= 4.44 f Qm N volts.
181. What are the losses in transformer?
In transformer there are losses due to,
1. Resistance of the winding (copper losses).
2. Eddy current and Hysterisis in the iron parts and core (core and iron losses)
3. Losses due to leakage reactance (leakage flux).
At No load the copper losses and leakage flux losses are negligible due to the very
less primary current.
At loaded condition copper losses and leakage flux losses will exist in cosiderable
manner. Copper losses are variable and can be calculated by Ip
2*rp and Is
2*rs.
Question and answers Electrical Maintenance Unit
- 54 -
Question and answers Electrical Maintenance Unit
- 55 -
182. What are the types of cooling in transformer?
1. Natural cooling.
a. Air natural cooling (Dry type).
b. Oil immersed natural cooling.
c. Oil immersed, forced oil circulation with natural cooling.
2. Artificial cooling.
a. Oil immersed forced air circulation with air blast cooling.
b. Oil immersed blast cooling.
c. Air blast cooling.
3. Artificial cooling (water).
a. Oil immersed water cooling.
b. Oil immersed forced oil circulation with water cooling.
4. Mixed cooling (water).
This is the method of cooling combining oil natural, water, air natural, air blast
and forced oil.
Question and answers Electrical Maintenance Unit
- 56 -
183. State the type transformers?
Transformers can be classified into different groups and types based on the
following factors.
1. Type of core.
a. Core type transformer core.
b. Shell type transformer core.
c. Berry type transformer core.
d. Spiral type transformer core.
2. Method of cooling.
a. Natural cooling transformer.
b. Artificial cooling transformer.
c. Artificial cooling (water) transformer.
d. Mixed cooling transformer.
3. As per transformer ratio.
a. One to one transformer.
b. Step down transformer.
c. Step up transformer.
4. Based on number of phases.
a. Single-phase transformer.
b. Two-phase transformer.
c. Three phase transformer.
5. As per winding connection.
a. Star-star connected.
b. Star-delta connected.
c. Delta-delta connected.
d. Delta-star connected.
e. Open delta connected.
f. Scott connected.
6. As per the size of the transformer.
a. Distribution transformer (upto 500 kVA).
b. Power transformer (above 500 kVA).
7. Based on function and utilization.
a. Auto transformer.
b. Potential transformer (instrument transformer).
c. Current transformer (instrument transformer).
184. What is the humming of transformer?
Humming is a sound, which is produced due to the vibration of the cores in the
transformer. The vibrations are produced due to the change in polarity of an
alternating current or voltage and by the loose of lamination of the core. Both can
be minimised by tightening the core of the transformer.
Question and answers Electrical Maintenance Unit
- 57 -
185. What are the types of AC three phase motors?
Mainly there are two types.
1. Synchronous motors.
a. Plain synchronous motors.
b. Auto synchronous motors.
2. A-synchronous motors.
a. Induction motors.
1. Single phase motors
• Shaded pole motor.
• Capacitor start capacitors run motor.
• Capacitor start induction’s run motor.
• Split face motor.
2. Three phase motors.
• 3φ single squirrel cage motor.
• 3φ double squirrel cage motor.
• Squirrel deep bar induction motor.
• Slipring induction motor.
b. Commutator motors.
1. Single phase commutator motors.
• Plain repulsion motor.
• Repulsion start induction’s run motor.
• Repulsion induction motor.
• Series motor or universal motor.
2. 3φ commutator motors.
• 3φ series motor
• Charge motor.
• Compensated motor.
186. What is the working principle of 3φ induction motor?
When 3φ supply is given to stator, a rotating magnetic field of constant magnitude
is produced. This rotating magnetic field produces induced emf in the rotor
winding as per faraday’s laws and this induced emf causes to circulate a heavy
induced current in the rotor winding due to very small resistance of rotor. At the
initial moment the frequency of induced emf is equal to the frequency of the stator
supply voltage, when the rotor is stationary as in the case of secondary of a
transformer. The rotor induced current according to lenz’s law flows in such a
direction that it opposes the cause, which is inducing it. In this case the cause
producing the rotor current is the relative speed between the rotating magnetic field
if stator and the rotor and is maximum when the rotor is stationary. Hence to reduce
this relative speed rotor conductor (rotor) starts to rotate in the same direction in
Question and answers Electrical Maintenance Unit
- 58 -
which the stator field is rotating and tries to catch it up. The rotation of this rotor is
developed due tog the torque developed in the rotor by interaction between the
rotating magnetic field of stator and the field produced by the rotor current.
Question and answers Electrical Maintenance Unit
- 59 -
187. What is torque?
As said above torque is a turning or twisting moment of a force about an axis and it
is measured by the product of force * radius at which the force acts.
There are two types of torques.
a. Starting torque: This is the torque, which is required to start the motor at
load or no-load.
b. Running torque: This is the torque, which is required to run the motor at
normal speed and at normal load.
The letter ‘T’ denotes torque in induction motor and torque is proportional to
Ir φ cosϕr.
That is T ∝ Ir φ cosϕr. Where Ir = rotor current.
φ = Flux = stator flux per pole in Weber.
Cosϕr = rotor power factor.
188. What is slip?
The difference in speed of stator magnetic speed ‘Ns’
(synchronous speed) and rotor speed ‘Nr’ is called slip
or absolute slip and it is denoted by the letter ‘S’.
∴ S = Ns – Nr / Ns.
Slip has no unit. Percentage of slip of induction
motor varies from 4 to 5% in small motors and 1.5 to
2.5% in big motors.
In other words slip ‘S’ = fr / f. Where fr is rotor
frequency and f is stator frequency.
189. What is the working principle of double squirrel cage
induction motor?
In double squirrel cage motor outer cage rotor winding
is of high resistance and low reactance. Inner cage
winding is of high reactance and low resistance.
At the time of starting rotor frequency is equal to
the stator frequency and there by the reactance of the
inner cage winding is comparatively high (XL = 2πfL) because
it is linking more inner winding than the outer winding. So the impedance of inner
cage winding is very high. Hence the current flow through inner cage winding is
very less comparing to the outer cage winding. That is a very high ratio of current
is passing through the outer cage winding at the time of starting and there by
produces very high starting torque.
When the rotor starts running the speed of the motor can be increased and the slip
will be decreased and there by the rotor frequency (‘S’ = fr / f). So that in
the running condition the reactance of the inner cage decreases to the lowest value
and hence the Impedance (XL = 2πfL). So the current in inner cage winding will be
comparatively more than the outer cage winding at the time of running. So now
Question and answers Electrical Maintenance Unit
- 60 -
inner cage winding produces more torque than outer cage at the time of running
and the motor running torque is good enough.
Question and answers Electrical Maintenance Unit
- 61 -
190. Why starter is necessary to start the AC motor?
a. At the time of starting motor starting current is
high (4 to 5 times). Therefore if motor is directly
started the supply voltage may be disturb.
b. By the help of starters starting and stopping of
motors can be made easily as we required. Because
starters provides overload tripping difficulties.
c. The help of starters can protect motor against the
single phasing by the action of overload
arrangements.
d. Protect the motor from no-voltage and its
difficulties.
e. Permits automatic control when required.
191. What are the types starters used for starting of
induction motor?
a. Direct on line starter (air break) mechanically.
b. Direct on line starter (air break or oil immersed)
electrically.
c. Star delta starter.
d. Slipring motor starter.
e. Auto transformer starter.
192. What are the speed control methods of induction motor?
a. By controlling the supply voltage.
b. By controlling the supply frequency (Ns = 120f / P).
c. By varying the number of poles (Ns = 120f / P).
d. By rotor rheostatic control (for small speed
variation).
193. What is magnetic locking or cogging effect of
induction motor?
In squirrel cage induction motor some times the rotor
and stator care teeth or slots are comes face to face
or parallel at stationary condition. If we are starting
the motor at this condition the motor get hesitated to
start or run due to the attraction developed between
those rotor and stator teeth or slots. This is known as
the magnetic locking or cogging effect of a squirrel
cage induction motor. This type of magnetic locking in
squirrel cage induction motor can be avoided either by
skewing the rotor slot or by selecting the rotor slot,
such that there is no common factor between the rotor
slot and stator slots.
194. What is skewing?
Skewing can be done by turning the rotor slots about 15°
from the parallel position of slots with the shaft.
Question and answers Electrical Maintenance Unit
- 62 -
That is rotor slots are not in parallel with the shaft
but there is an angle of about 15° with the shaft.
195. What are the losses in induction motor?
a. Stator losses (stator copper losses, stator iron
losses).
b. Rotor losses (rotor copper losses, rotor iron
losses).
c. Windage and friction losses.
196. What is synchronous motor?
An alternator, which is running as a motor can be
called as synchronous motor and it runs at synchronous
speed while it converts electrical energy into
mechanical energy. It requires both AC for armature and
DC supply for field.
Question and answers Electrical Maintenance Unit
- 63 -
197. What are the advantages and dis-advantages of
synchronous motor?
Advantages
a. It’s a constant speed motor and is equal to
synchronous speed from no load to full load.
b. It has good efficiency higher than induction motor.
c. It can be run as a motor and also as an alternator as
per the requirement. More over it can be used as
synchronous condenser.
Dis-advantages
a. It can not be used as a varying speed motor. Because
its speed can not be varied.
b. As a motor it is not self-starting type and it can
not be started on load.
c. It requires both AC and DC supply.
d. Hunting is also produced in this motor.
198. What are the applications of synchronous motor?
a. These motors are used in powerhouses, in sub stations
for the improvement of power factor by connecting it
in parallel to the supply and it is run without load
under over excitation of field.
b. Used in big industries where many induction motors
are installed to improve the power factor.
c. Used for constant mechanical loads.
199. What is hunting effect?
When the load is varied to the motor the oscillation
being setup in the rotor about the position of
equilibrium corresponding to change of load condition.
So the damper winding acts the magnetic lines of force
and causes to create the opposite torque, which keeps
the rotor in the same position of the particular load.
This oscillation of the rotor is known as Hunting or
Phase swinging. To reduce this hunting damper winding
is helpful.
200. What is synchronous condenser or phase advancer?
An over excited synchronous motor takes leading current
just like a condenser and gives leading power factor. A
synchronous motor, which I used only for the purpose of
improving power factor, can be called as synchronous
condenser or phase advancer.
201. Why single-phase motors are not self-starting?
When a 1φ supply is given to the single winding of the
single phase motor, the field produced by it changes in
magnitude and direction sinusoidally (pulsating flux).
Question and answers Electrical Maintenance Unit
- 64 -
Such and alternating field is equivalent to two fields
of equal magnitude and speed rotating in opposite
direction. Such rotating magnetic fields produces two
torque’s on the rotor. So the rotor can not rotate in
any direction. Because the net torque developed by the
motor is equal to zero. So a single-phase motor is not
self-starting.
Question and answers Electrical Maintenance Unit
- 65 -
202. What are the methods to self-starting of single-phase
motor?
a. Splitting one phase into two phases.
b. By using capacitor.
c. By using repulsion method.
d. By shading the poles.
e. By connecting the field in series with the rotor
having winding with commutator (AC series motor or
universal motor).
203. What are the methods to control the speed of singlephase
motor?
In AC single-phase motors speed control can not be
achieve as smooth as in DC motor. There are following
few methods of speed control.
a. By changing the number of poles of stator.
b. By changing the applied voltage to the stator.
c. Frequency control method.
d. Rotor rheostat control.
e. By operating two motors in concatenation or cascade
or tandem method.
f. By injecting an emf in the rotor circuit.
g. By changing slip.
204. What are the classifications of electrical measuring
instruments?
a. Absolute instruments. These instruments give the
value of the quantity to be measure in terms of the
constant of the instrument and their deflection only.
There is no any calibrated scale.
b. Secondary instruments. Secondary instruments are
those, which are calibrated in comparison with some
absolute instrument so as to indicate the electrical
quantity to be measured with the deflection of needle
or pointer of that meter over a calibrated scale.
205. What are the operating principles of electrical
measuring instruments?
a. Magnetic effect.
b. Electro dynamic effect.
c. Electro magnetic effect.
d. Thermal effect.
e. Chemical effect.
f. Electro static effect.
206. What are the classifications of secondary instruments?
a. Indicating instruments.
b. Recording instruments.
Question and answers Electrical Maintenance Unit
- 66 -
c. Integrating instruments.
207. What are the essentials of indicating instrument?
a. Deflecting torque or force (effect of electricity).
b. Controlling torque or force (spring control and
gravity control).
c. Damping torque or force (air friction, eddy current
and fluid friction).
Question and answers Electrical Maintenance Unit
- 67 -
208. What are the possible errors in induction (energy
meter) measuring instruments?
a. Phase error: Field flux in induction meter does not
lag 90° behind the supply voltage due to its
resistance. This can be adjusted by copper shading
rings, which are placed at the central limb of the
shunt magnet.
b. Speed error: An error in speed, which is tested on
the non-inductive load, can be eliminated by
correctly adjusting the position of the brake magnet.
c. Friction error: It can be reduced very much by
providing two copper shading st the both outer limbs.
d. Creeping error: Some time slow, continuous rotation
of the disc (rotor) when only the pressure coil is
excited, but no current flowing in the circuit (no
current in current coil) may happen. It may be caused
due to incorrect friction compensator, stray magnetic
field, and excess voltage. This can be rectified by
drilling two holes in the disc on the opposite sides
of the spindle. This causes sufficient distortion of
the field to prevent rotation, when one of the holes
comes under one of the pole of the shunt magnet.
209. What is illumination?
The quantity of a light emitted by a lighting source is
known as illumination. Heating effect of electric
current is used in producing illumination. When a solid
or vapour is heated it begins to radiate energy in the
surrounding media.
Lux is the unit for illumination. Lux is the
illumination produced by a uniform source of candle
power on the inner surface of a sphere of radius one
(1) meter.
210. What are the laws of illumination?
a. Illumination ‘E’ is directly proportional to the
luminous intensity ‘I’ of the source. ie E ∝ I.
b. Inverse square law: The illumination of the surface
is inversely proportional to the square of the
distance of the surface from the source. ie E ∝ 1/d2.
c. Illumination ‘E’ is directly proportional to the
cosine of angle made by the normal to the
illumination surface and the direction of the
incident light and is known as lam pod’s cosine
angle.
Question and answers Electrical Maintenance Unit
- 68 -
211. What are the factors to be considered for correct
illumination?
a. Nature of work.
b. Determine the foot-candle illumination required after
studying the nature of work. Example for precision
work – 100 foot candle, for fine engraving – 50 foot
candle, for reading, typing, drawing, fine machine
works 25 foot candle etc.
c. Design of apartment using for the proper projection
of illumination for better work or purpose.
212. What are the types of lighting?
a. Direct lighting: light directly comes from the source
to the surface.
b. Indirect lighting: light reflects from the wall,
reflector or ceilings etc.
c. Semi direct lighting: light comes through the shade.
Question and answers Electrical Maintenance Unit
- 69 -
213. What are the properties of good illumination?
a. It should have sufficient light.
b. It should not strike the eyes.
c. It should not produce glares.
d. Light should be uniform.
e. It should be of harmonious.
f. It should be of correct type as needed.
g. It should have suitable shade and reflector.
h. Economically productive.
214. What are the sources of light?
a. Incandescent lamps.
b. Carbon arc lamps.
c. Gas discharge lamps.
215. What are the materials used in Neon sign tube lamps
for different colors?
Following are the materials used in neon sign tubes for
different colors.
For, Red – Neon gas.
Reddish orange – Neon gas + Argon gas.
Blue – Vapour of mercury.
Golden – Neon gas + Helium gas.
Green – mixture of Neon gas and mercury in yellow
glass tube.
By depositing fluorescent powder on the inner surface
of the tube varying colors in intensity can be made.
216. What is the material used in florescent tube?
The fluorescent tube is filled with argon gas at law
pressure and some mercury after evacuating the tube.
This argon gas gives initial starting at quick manner.
Initially the mercury is in the form of globules on the
inside of the tube surface. As the temperature
increases the liquid takes globules mercury changes
into vapour form and takes over the conduction of the
current.
217. What are the importances of conversion of AC into DC?
a. For traction purpose a DC series motor is most
important. Examples in railways, in electrical lifts
etc.
b. For electrolytic and electro chemical processes such
as electro plating, electrolysis, electro refining
only DC is essential.
c. DC is essential for battery charging, running arc
lamp torch, cinema projector and for arc welding.
Question and answers Electrical Maintenance Unit
- 70 -
d. It is required for operating relays, timer,
telephone, circuit breakers etc.
Question and answers Electrical Maintenance Unit
- 71 -
218. What is rectifier? Write few types of rectifiers.
Rectifier is a device which converts AC supply into DC.
Following are the types of rectifiers generally used.
a. Copper oxide rectifier.
b. Selenium rectifier.
c. Electrolytic rectifier.
d. Mercury arc rectifier.
e. Tungar rectifier.
219. What are the parts of paper insulated lead covered
cable?
a. Core.
b. Insulation of cable.
c. Metallic sheath.
d. Bedding.
e. Armouring.
f. Serving.
220. What are the factors considered for selecting a cable?
Following factors considered for the selection of the
cable.
a. System voltage.
b. Condition of installation.
c. Continuous current to be carried.
d. Maximum operating conductor temperature (70°).
e. Ambient air temperature (40°).
f. Thermal resistivity of soil.
g. Depth of laying.
h. Short circuit current. Ish = Ka / (t/2). Where ‘K’ is
constant (K = 109 for copper cables), ‘a’ is area and
‘t’ is time duration of short circuit in seconds.
221. What are the advantages of high voltage transmission?
a. Saving in conductor materials.
b. Low power loss (I2R) of transmission lines due to
decrease in current.
c. Better efficiency of line due to fewer losses.
d. Better voltage regulation due to less voltage drop in
line due to less transmission current.
e. Due to the less cross section of conductor distance
between the poles increases and the cost decreases
and the labour cost also decreases.
222. What are the types of distribution system?
a. Radial distribution system.
b. Ring distribution system.
c. Grid distribution system.
Question and answers Electrical Maintenance Unit
- 72 -
223. What are types of distribution of supply?
a. Over head distribution system.
b. Under ground distribution system.
Question and answers Electrical Maintenance Unit
- 73 -
224. What are the main items used in over head distribution
system?
a. Conductor material.
b. Pole.
c. Cross arm.
d. Insulators.
e. Strain insulator.
f. Post insulator.
g. Stay wire.
h. Support with insulator and stay lightner.
225. Write types of lightning arrestor.
a. Horn gap lightning arrestor.
b. Oxide film lightning arrestor.
c. Pellet lightning arrestor.
d. Thyrite lightning arrestor.
226.
Question and answers Electrical Maintenance Unit
- 74 -
Motor, Generator and Exciter.
1. What are the main classifications of alternator?
a. Salient pole.
b. Non – salient pole.
2. What is the emf equation of alternator?
Flux cut per second by each conductor = 2 φm f
Average emf generated in each conductor = 2 φm f Z
Average emf generated per phase = kd kc 2 φm f Z
r.m.s emf generated per phase = kf kd kc 2 φm f Z
For sinusoidal waveform when kf is 1.11 then emf generated
= 1.11 *2 kd kc φm f Z
= 2.22 kd kc φm f Z
kf 􀃆form factor
f 􀃆 Frequency
φm 􀃆 Flux maximum
Z 􀃆 Turns per phase
kd 􀃆 Breadth factor or distribution factor
kc 􀃆 Coil span
3. Why conductors in alternator are transposed?
To reduce eddy current losses.
4. What is the effect of frequency and high voltage at the start of motor.
For a constant load if frequency decreases motor current will increase and at the start
if voltage is more motor current also increases.
5. What is the minimum voltage required for starting of 6.6 kV motors?
Minimum 80% of rated voltage.
6. What are the limits of vibration measurement for motors?
50 microns for displacement and 5 mm/second for velocity.
7. What you mean by SPDP?
Screen protected drip proof.
8. What is the current in single phasing?
2 times of rated current.
9. What is the impedance per phase of delta connected motor?
1.5 times the total impedance.
Question and answers Electrical Maintenance Unit
- 75 -
10. What is the slip of an induction motor during normal running?
More than zero.
Question and answers Electrical Maintenance Unit
- 76 -
11. What is the effect of increased load on power factor of induction motor?
Power factor of an induction motor increases with loading.
12. Explain the behavior of generator when operating alone and operating parallel with
grid.
Generator operating alone.
a) The power factor of generator depends on load power factor.
b) The terminal voltage decreases when generator is loaded.
c) Governor decides the frequency of generator.
d) Increase in excitation increases the terminal voltage of the generator.
Generator parallel with grid.
a) If we increase the steam input to the generator the frequency of the generator will
not change. It will remain practically constant as same as grid frequency. That is
grid decides the frequency of the generator.
b) Increase in the excitation will not increase the terminal voltage. Instead the
reactive power out put of the generator increases. This reactive power supplies for
the magnetizing current of motors, transformers and etc.
c) Increase in the steam input increases the active power of the generator.
d) If generator is under excited it will draw leading reactive current from the grid.
13. Draw and explain following.
a) Load current Vs terminal voltage at different power factors.
1. At leading power factor as the load current increases the terminal voltage also
increases.
2. At lagging power factor as the load current increases the terminal voltage
drops.
3. At unity power factor as the load current increases there is slight drop in
terminal voltage.
Leading power factor
Unity power factor
Lagging power factor
Ter. Vol.
Load current
Question and answers Electrical Maintenance Unit
- 77 -
b) Torque Vs slip characteristics of induction motor.
Torque (T) = φ I2 cosφ2
Where φ - main flux.
I2 – rotor current Pull out torque (R = XL) I
Cosφ2 – rotor power factor.
Starting current
Starting torque (1.5 times)
Torque Full load current
1 Slip 0
When motor is started from rest the slip is 1 (one) at time of starting and starting
torque is 1.5 times of rated torque. As the motor accelerates slip reduces and torque
increases. Because the power factor of rotor is improving due to the decrease in rotor
frequency and at certain slip the rotor reactance is equal to rotor resistance. At that
time torque is maximum (pull out torque). When the motor accelerates to the rated
speed the torque comes to the rated value, which is less than the starting torque.
Torque is zero when slip is zero, because there will be no relative motion between
stator magnetic field and rotor.
c) Generator capability curve
This curve gives the operating limits of the turbine generator at different power
factor what should the power output of the generator to avoid the heating of
generator stator winding, rotor parts and end parts.
Question and answers Electrical Maintenance Unit
- 78 -
Question and answers Electrical Maintenance Unit
- 79 -
14. What is the cooling medium for different parts of the turbo generator?
Stator – DM water.
Rotor – Hydrogen.
Bearing – Oil.
15. What are the effects of unbalanced voltage on induction motor?
There will be negative sequence current, which will heat up the stator winding and
weakens the insulation. These currents will induce emf in rotor and heat up the rotor
bars and cause breakage in them. Also due to high leakage fluxes due to negative
phase sequence current the end parts heating will be more.
16. What are the types of bearings are adopted for small motors and large motors?
Small motors (LT motors)
Horizontal mounted – deep groove ball bearing at both ends.
Medium motors
Roller bearing at DE and deep groove bearing at NDE.
Large motors (HT motors above 750 kW)
Horizontal mounted – sleeve bearing (pedestal) cooled by lub oil.
Vertical mounted – face to face angular contact ball bearing at NDE and roller or ball
bearing at DE.
Question and answers Electrical Maintenance Unit
- 80 -
Insulation classification and testing.
1. What is good dielectric break down value for insulating oil?
60 kV.
2. What is the temperature coefficient of insulating materials?
Insulators are negative temperature coefficient materials.
3. What is gap between the electrodes in transformer oil testing kit?
0.1 Inch.
4. What is the life insulation if temperature increased by 10°C?
The life of the machine insulation decreases by half if the temperature of the
insulation increases by 10°C.
5. What is the value of vacuum maintained by vacuum pump in oil filteration machine?
27 Hg.
6. What is the DC HV test voltage range?
1.7* 1.5* rated voltage.
7. What do you mean by term insulating resistance? How it is measured?
Insulating resistance: insulating resistance is the opposition offered by an insulating
material to the flow of current (electrons) through it when an high potential is
applied across it.
Insulating resistance are measured by megger.
First the equipment whose resistance is to be measured is disconnected from supply.
If the machine is a large one, there may be accumulated static charge on the machine.
So we have to discharge it by connecting a wire between the terminals and ground
for 15 minutes. Otherwise megger will give wrong reading.
After this we should remove the wire and we have to connect megger terminals (live
& earth) to the motor terminal and earth. The rating of the megger should be selected
properly. Then rotate the megger at rated speed of 160 rpm and take the readings.
Question and answers Electrical Maintenance Unit
- 81 -
8. What you mean by dielectric absorption test?
Whenever we apply a potential from the megger to test the IR value, initially the
needle of the megger will go to low value of the resistance. This is due the
capacitance effect of the insulation material and after some seconds the needle will
start moving towards the higher value. Because in the insulating material there is
strain on the molecules when the potential is applied. Polarization of the molecules
occurs and they form a Di – pole. The negative charges are attracted to positive
terminal and positive charges are attracted to negative terminal. So there is a strain
on the insulation molecules and they align themselves parallel. This aligning may
take more time. This test is done to know the condition of insulating material.
I
(μ Amps)
(A)
(B)
Time
If the insulation is good the graph is as shown as B and if there is dirt, moisture the
graph will flatten early as shown in A.
After the test terminals to be discharged so that molecules may return to their
unstressed state.
Question and answers Electrical Maintenance Unit
- 82 -
9. Draw the transformer drying out curve and explain each stage.
At this point the heaters are
IR and Switched off.
Temp. Temp.
IR
1st 2nd 3rd
Time in hours
When we start the filtering process initially the temperature will be low, as the
insulation value is high. But on temperature increases the IR value starts to decrease
because the moisture entrapped in the coils are released due to rise in temperature
and this causes the IR value to go down. This is the first stage.
Then comes the point where all the moisture is released and then will be no decrease
in IR value or rise in the temperature. This is the second stage.
At this point the heaters are switched off. Now the moisture is removed by the oil
filters and the IR value goes up and as the heaters are off the temperature decreases.
This is the third stage.
10. The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C.
what is its value corrected to 40°C. the correction factor for 70°C is 8.0.
Observed resistance at 70°C – 15 MΩ.
Temperature correction factor – 8.
Rm = kt * Rt kt – correction factor.
Rm = 8 * 15 Rt – resistance measured at +°C.
Rm = 120 MΩ. Rm – corrected value to 40°C
The IR of DC motor corrected to 40°C is 120 MΩ.
Question and answers Electrical Maintenance Unit
- 83 -
11. The armature of a 600 kW, 0.24 k, 1000 rpm DC generator has an indicated IR to
ground of 2 MΩ at a temp. of 30°C. what is the recommended value of insulation? Is
it advisable to put the machine in service? Give reason. Correction factor for 30°C is
0.5.
Data given are
kV – 0.24
Indicated IR – 2MΩ
Temp. - 30°C
Correction factor – 0.5
Recommended value (Rm) = kV + 1 MΩ
= 0.24 + 1
= 1.24 MΩ
Indicated IR at 30°C = 2MΩ
Correction factor – 0.5
So value corrected to 40°C = Rm = kt * Rt
= 0.5 * 2
= 1MΩ
The generator cannot be put in service because the corrected value is lesser than
recommended value. It should be sent for IR re-conditioning .
Question and answers Electrical Maintenance Unit
- 84 -
Motorised valve actuator
1. What are the advantages of motorised valve actuators?
Advantages
a. Can be used to operate in remote areas, high heat areas etc.
b. Suitable logics can be wired up easily.
c. Hammer blow mechanism (which will release valve in stuck open or close). The
motor has high torque.
2. What are the four basic parts of any valve actuators?
a. Valve motor.
b. Gear mechanism.
c. Limit switch and torque switch assembly.
d. Terminal box.
3. Explain how the motor motion is transmitted to the valve stem?
The motor shaft is connected to a spar gear. It engages on a worm wheel. The worm
wheel has dog teeth. This dog teeth engages or hits the dig teeth on moving or sliding
clutch. The sliding clutch has splines and these are on the splines of valve stem. So
when the sliding clutch rotates the valve also rotates simultaneously.
4. Do you require separate limit switch for closing and separate limit switch for
opening? Ans. YES.
5. What does the limit switch mechanism senses to operate?
Limit switch mechanism senses whether the open and close travel of the motor has
exceeded the limit setting of the motor to operate.
6. What does the torque switch mechanism senses to operate?
Torque switch senses whether the torque of motor has exceeded the set point
irrespective of position of valve.
7. Explain the operational aspects of limit switch and torque switch in rotork valve
actuator.
a. When limit function is selected?
b. When torque function is selected?
Limit function – when limit function is selected in rotork valve, the limit switches
will operate when the limit set points are reached. Suppose limit switches fails to
operate the torque switches will act and cuts off the supply to the motor (both torque
switch and limit switches can act when selected to limit function).
Torque function – when torque function is selected the torque switches will act when
set point is reached. The limit switches will not act (only torque switch will act when
selected to torque function).
Question and answers Electrical Maintenance Unit
- 85 -
8. Indicate how you will select the limit switch contacts for indication and for cutting
the supply to the motor?
For cutting off the supply to the motor normally closed (NC) contacts of limit switch
(LS) should be wired in series with interposing relay coil of respective direction of
the valve so that when valve reaches their respective direction contact will open and
cut the control supply. For indication normally open contacts (NO) of opposite
direction of valve should be used so that when valve fully closes open indication
contact should remain NC only and vice-versa.
So for close direction
NC contact of close direction
9. What indication will you get in control room when
a) valve is open – green
b) valve is closed – amber
c) valve is intermediate – both
d) valve is closing and torque switch operate – both
10. What is the function of hammer blow mechanism?
Hammer blow mechanism allows motor to rotate freely for ½ or ¼ turn and the dog
teeth on worm gear comes against the dog teeth on sliding clutch with a blow. This is
use full when valve is stuck in fully open or closed condition.
11. How will you proceed to operate the valve manually after an electrical operation?
After electrical operation to operate manually we must tilt the lever provided on the
actuator to hand (manual) position by which the sliding clutch gets engaged with
hand drive.
12. Know the setting procedure for all valves.
13. Know the control and power circuit diagram of electrical motorised valve.
Question and answers Electrical Maintenance Unit
- 86 -
Transformers
1. What is the colour of silica gel in dry stage and when saturated with moisture in a
breather?
Dry stage – Deep blue.
Saturated stage – Whitish pink.
2. What is the static pressure of diaphragm in the transformer explosion vent?
5 psi.
3. In buchholz relay how the top and bottom mercury switches are connected?
Top mercury switch is connected for alarm and bottom switch for trip.
4. What is the normal value of moisture content allowed in transformer oil?
<10 ppm.
5. What is the vector group of distribution transformer?
Dy11.
6. What are the losses in a power transformer and mention how these losses can be
minimised?
There are two losses in a transformer.
a. Iron losses.
b. Copper losses.
Iron losses – Iron losses constitutes of two losses.
a. Eddy current losses, these are due to the induced emf in the core, which
constitutes a current in the core. These will heats up the core.
Eddy current losses can be minimised by using laminated core immersed in
varnish. This provides a high resistance between the laminations and thus eddy
current in reduced.
b. Hysterisis losses, these are due to the magnetic reversal of current by which there
is friction between molecules of core and heat is generated.
Hysterisis losses can be minimised by selecting proper magnetic material, like
silicon steel.
Copper losses – these losses are due to the resistance of the winding, which is equal
to I2rt (calories). These losses are depends on load. That is the losses are
increased to the square of the load current
I – current through winding.
r – resistance of winding.
t – time duration.
Question and answers Electrical Maintenance Unit
- 87 -
7. Define the percentage voltage regulation and efficiency of a power transformer.
Voltage regulation is the difference between no load voltage and full load voltage by
no load voltage.
Voltage regulation = No load voltage – Full load voltage / No load voltage.
Voltage regulation is mentioned in % (percentage).
% Voltage regulation = No load voltage – Full load voltage * 100 / No load voltage.
Efficiency of a transformer is the ratio of output in watts and input in watts.
Efficiency = Output in watts / Input in watts.
% Efficiency = Output in watts * 100 / Input in watts.
% Efficiency = Output in watts * 100 / Output in watts + losses.
8. Mention the important parts of a power transformer and their purposes.
Conservator: This allows for shrinkage and swelling of transformer oil. When the oil
is heated up it swells and rises to the conservator. When cools down it goes back to
main tank. Conservator reduces sludge formation of oil because only the oil surface
in conservator is exposed to atmosphere where oil in the main tank is not exposed to
atmosphere.
Breather: It provides dry sir to conservator when transformer breathes. That is when
there is shrinkage of oil atmospheric air enters conservator through breather. The
moisture is absorbed in breather by silica gel.
Buchholz relay (gas operated): If there is an initial fault, heating up of core, high
resistance joints heating up by conduction through insulation and supports. There is
heating up of oil, which breaks down and gases are released. This gas actuates the
mechanics in the relay, There by closing contacts of mercury switches for alarm.
Also if there is a short circuit, the buchholz relay will trip the transformer. Also if
there is any leakage of oil through bushing etc and oil level comes down the relay
will give alarm and also will trip the transformer if transformer oil level comes down
the point. Gases can be taken from the relay to identify nature of fault.
Explosion vent: It provided on transformer main tank, provided with two Bakelite
diaphragm which break when the pressure exceeds 5 psi in the transformer tank and
relieve the pressure.
Core: To provide low reluctance path for the magnetic lines of force. It carries both
the HV and LV windings.
HV Winding: High voltage is given to HV winding and low voltage is taken from
the LV winding.
LV Winding: Low voltage is given to LV winding and high voltage is taken from the
HV winding.
Cooling tubes: These are provided to cool the transformer oil so that the heat of oil
will be given to the atmosphere.
HT bushing: Carries the HV terminals.
LT bushing: Carries the LV terminals.
Question and answers Electrical Maintenance Unit
- 88 -
Tap changer: this is provided so that we can get the required voltage out put. There
are two types of tap changer. Online tap changer and off line tap changer.
Question and answers Electrical Maintenance Unit
- 89 -
9. Mention the properties of transformer oil.
Properties of transformer oil are,
a) Colour – pale yellow.
b) Moisture content - <10 ppm.
c) Acidity (KOH/gramme of oil) – <0.1.
d) Dielectric strength – limit value is 45 kV and preferable value is 60 kV.
e) Flash point - 141º C.
f) Inter surface tension – 30 to 40 dynes / cm or 0.3 to 0.4 Newton.
g) Resistivity –
10. How explosion vent works?
Explosion vent is provided on the transformer tank to relieve pressure if the pressure
in the transformer exceeds 5 psi. It is swan neck shaped having two Bakelite
diaphragms. One at top and another at bottom. These break if the static pressure
increases to 5 psi. Wire meshes are provided below the bottom diaphragm and above
the top diaphragm. When there is any breakage due to excess pressure the bottom
wire mesh prevents broken pieces from entering transformer tank and the wire mesh
provided above the top diaphragm protects the diaphragm from any external damage.
There is an oil level indicator provided above the bottom diaphragm. It indicates the
level of oil in the vent if the bottom diaphragm ruptures.
A ruptured diaphragm must be immediately replaced. Also we should check the top
diaphragm for any external damage.
11. Explain the operation of silica gel breather.
Silica gel breather is used in a transformer to provide dry atmospheric air to the
conservator when transformer breathes. The breather consists of an inner container
and outer container. The inner container contains silica gel, which absorbs moisture.
An oil bath in provided at the bottom of breather so that the silica gel will not be in
direct contact with the atmosphere. Also it will trap dust and dirt entering the
breather. Dry silica gel will be deep blue in colour. After it gets saturated with
moisture it will turn into white pink. The change of colour silica gel can be viewed
externally through transparent viewer provided on the breather. When the silica gel is
saturated with moisture it must be replaced or regenerated or recharged. Silica gel is
recharged by heating it to a temperature of 250º F to 300º F till the deep blue colour
of silica gel is got back.
Question and answers Electrical Maintenance Unit
- 90 -
12. Explain with diagram the operation of on load tap changer.
Tap changer (ON LOAD type) can be used to increase or decrease transformer
output voltage without break in the voltage to the load.
The tap changer consists of a diverter switch. The odd taps are taken on one side and
even on another side as shown in figure.
The diverter switch is provided so that there will be no break in the supply to the
load and also no cut of transition resistance when the tap changing is achieved.
Transition resistors are provided to limit the current when the windings are shortcircuited
by the diverter switch.
Operation: In the above figure, the voltage at tap 2 is 406 V. the position of diverter
switch is shown. It short-circuited with transition resistance.
We want to increase voltage to 420 V at tap 5. When we begin to change the tap the
diverter switch connects 2 transition resistance and when the tap changeover is
achieved that is when the tap changer reaches tap 5, the diverter switch short circuits
transition resistance and thus the resistance is eliminated. The diverter switch
switching time is very high. This is to reduce arcing, which can decompose the oil.
The whole assembly is immersed in oil. OLTC is connected to HV side, because in
LV side current handled will be more. But in HT side current to be handled is lesser
than LV side.
Question and answers Electrical Maintenance Unit
- 91 -
13. Explain the procedure for finding out the vector group of a transformer.
Procedure: Take the nameplate details. See from nameplate what group the
transformer belongs. Suppose nameplate says that transformer belongs to Dy11.
Take the IR value between
a) HV and LV with body grounded. That is between A2 – a2, B2 – b2, C2 – c2.
b) HV and body with LV grounded and
c) LV and body with HV grounded. A2 c2 a2
C2 B2 b2
Connect A2 to a2 and give low voltage (415 V) to HV side. Measure voltage between
a. C2 – b2 􀃆 410 V (example).
b. C2 – c2 􀃆 395 V (example).
c. B2 – b2 􀃆 395 V (example).
d. B2 – c2 􀃆 395 V (example).
Draw the diagram of Dy11 and check that the readings got are correct.
A2
a2
30º
b2
c2
According to the fig. C2 B2
C2 c2 = B2 b2 = B2 c2.
And C2 b2 will be greater than C2 c2 , B2 b2, B2 c2.
That is C2 b2 >> C c2.
If these conditions are satisfied then that transformer belongs to vector group Dy11.
A2
/ a2
For Dy1 transformer
B2 c2 will be greater than B2 b2, C2 c2, C2 b2.
That is B2 b2 >> B b2. c2
C2
b2 B2
For Yy0 transformer A2/a2
B2 c2 = C2 b2
B b2 = C c2
B b2 and C c2 will be lesser than B2 b2 and C2 b2.
C2/c2 B2/b2
Question and answers Electrical Maintenance Unit
- 92 -
Turbine Generator Basics
1. Explain the principle of working of impulse steam turbine.
When steam enters the turbine it suffers a change in direction and momentum, which
gives rise to the rotation of the turbine. There will be no drop in pressure in impulse
steam turbine.
2. Mention the four processes involved in Renkine cycle.
Saturated liquid line.
4 1
Saturated vapour line.
3’
3 2
1 – 2 􀃆 Expansion process.
2 – 3 􀃆 Constant pressure heat rejection.
3 – 3’􀃆 Reverse adiabatic expansion.
3 – 4 and 4 – 1 􀃆 Constant pressure heating.
3. What are the methods of removing moisture from turbine?
a. External method by moisture separator and reheater, which separates the moisture
and reheates the steam.
b. Internally by stainless steel mesh, which reduces moisture (water particles) to
1%.
c. By main steam reheat.
4. Define capacity factor.
Capacity factor can be defined as net power produced by the plant divided by perfect
net power that can be produced in the plant.
Capacity factor = Net power produced / Perfect net power produced.
5. What is the purpose of turbine governing system?
Turbine governing system governs the speed of the turbine with the help of
centrifugal governer. It reduces the steam inlet when turbine over speeds.
6. What are the benefits of feed water heating?
a. It improves the plant efficiency.
b. Feed water is heated nearer to saturation point thus thermal shock to boiler is
avoided.
Question and answers Electrical Maintenance Unit
- 93 -
7. Mention parameters monitored by turbovisory instruments.
a. Speed governing.
b. Eccentricity monitoring.
c. Vibration monitoring.
d. Valve position monitoring.
e. Temperature monitoring.
f. Pressure monitoring.
g. Level monitoring.
h. Gas leak monitoring.
i. Conductivity monitoring.
j. Flow monitoring.
8. What are the purposes of turning gear?
Turning gear is used to run the turbine from rest to low speed and from normal
running speed to low speed with the help of barring motor to eliminate the hogging
and sagging of turbine because of the high temperature.
9. Explain the differences between the two types of feed water heaters.
a. Open type: In which bleed steam and condensed water are mixes directly and there
is also dearation of steam.
b. Closed type (shell type): It has tubes and shell. The water passes through the tubes
and steam passes through shell. The heat exchange takes placcce through the
metal tubes.
10. Why condenser back-pressure must be low? How it is achieved?
Condenser back- pressure must be low, because steam should be dumped into the
condenser so as to recycle it to boiler through the recycle process. It improves
efficiency of the turbine, as the heat rejection is less. It is achieved by the help of
ejectors and also passing cold water in the condenser through the tubes of the
condenser so that maximum vacuum can be obtained.
11. What are the materials used for TG rotor and blades?
TG rotor is made up of alloy steel and blades are made up of stainless steel.
12. Define the term heat rate?
Heat rate is defined as the heat supplied in to the plant in Btu by power generated or
output by the plant in kWh.
Heat rate = Heat supplied in Btu / Power output in kWh.
13. What is the purpose of gland steam system?
Gland steam system is provided to arrest the steam leak from the turbine and to
protect the air ingress into the turbine.
Question and answers Electrical Maintenance Unit
- 94 -
14. Explain the main difference between impulse and reaction turbine.
When the inlet pressure of steam to the turbine is equal to outlet pressure of steam
from the turbine the turbine is called the impulse turbine. In this type the heat is
added is very less.
In reaction turbine the outlet pressure of steam is less than the inlet pressure of the
steam. There is reduction in pressure with the increase in kinetic energy.
15. What is meant by hydrodynamic film lubrication?
In high-speed turbines the lubricating oil will be at the sides and there is metal to
metal contact when turbine at rest. When the turbine speeds up there is pressure
pushing the oil through the metal to metal contact. When turbine finally achieves its
speed the oil film breaks the barrier and it takes the load on itself. This is
hydrodynamic lubrication.
16. How does the hydrostatic lubrication differ from hydrodynamic type?
In hydrostatic lubrication which is used in slow speed turbines the lubricating oil is
pressurised externally where as in hydrodynamic system it forms oil film by its speed
which pushes the lubrication oil to form film.
17. What are the functions of dearator?
Dearator removes non-condensable gases (O2), which gets added in the steam and it,
mixes steam with the condensed water for feed water heating. This is a contact type
feed water heater.
18. Why non-return valves are provided in the steam extraction lines?
Non-return valves are provided because when the turbine trips there will be an
instant drop in pressure inside the turbine. But there will be steam in feed water
heaters, which is at high pressure. These will rush in to the turbine and overspeed
will be there in turbine. So non-return valves are provided in steam extraction lines
to prevent over speeding of turbine.
19. What is the function of the steam traps?
During startup the steam traps will bypass turbine drains.
20. What do the term sensible heat and latent heat mean?
Sensible heat: We can measure the rise in temperature. When we add more heat to a
substance. Example – heat that added to water from 0º C to 100º C. This added heat
is measured as sensible heat.
Latent heat: Though there is addition of heat there will be no rise in temperature.
This is latent heat. Example – when water boils at 100º C though we added more
heat the temperature remains at 100º C till all water becomes steam.
Question and answers Electrical Maintenance Unit
- 95 -
21. How are the generator rotor and stator cooled?
Passing highly DM water through the hollow conductor of the generator cools
generator stator and rotor is cooled by hydrogen.
Question and answers Electrical Maintenance Unit
- 96 -
22. What is function of seal oil system?
Seal oil prevents the leakage of hydrogen from the generator casing to the
atmosphere, where it can form explosive mixture. Seal oil is at higher pressure than
hydrogen.
23. What are the base load and peak load power stations?
During certain periods the load demands are very high. Example the morning when
all factories operate. During these time certain power plants like thermal plants gives
this extra power required. These are the Peak load stations, which operates at certain
periods.
But during the rest of period that is when there is no peak power demand there are
some power stations, which cater to the base load always runs giving power to the
grid. These stations are producing power at constant rate. These stations can not be
easily stopped or restated. Nuclear power station comes under Base load power
station category.
24. What are two types of governing system.
Throttle governing system: In this a valve (just like tap water controlling) which
reduces the steam pressure controls the steam flow. This has very less efficiency.
Nozzle governing: In this the steam floe is reduced but the pressure remains the
same. This is achieved by four valves in which when one is closed to 25% of steam
is reduced. This is efficient way of governing.
Question and answers Electrical Maintenance Unit
- 97 -
Conventional system
1. How turbine oil purification is achieved?
Oil purification is achieved by centrifugal operation.
2. Why morpholine is used?
Morpholine is used for pH control.
3. By which material condenser tubes are made?
Condenser tubes are made up of aluminium brass.
4. How boiler level is controlled?
Feed water control valves controls boiler level.
5. Where magnetic filter is used?
Magnetic filter is used in stator water lines to remove magnetic particles from the
DM water.
6. What is the purpose of accelerator governer?
The purpose of accelerator governer is to cut of steam momentarily when large
electrical loads are taken to prevent turbine speeding up.
7. What is the use of jacking oil pump?
Jacking oil pump is used to initial lifting of turbine rotor by hydrostatic lubrication.
8. What is the use of supplementary oil tank?
Supplementary oil tank is used to collect the oil drains from the CIES valves.
9. How dearator pressure is maintained?
Dearator pressure is normally maintained by extraction steam.
10. How dearator pressure is maintained after turbine trip?
Pegging steam is used to maintain dearator pressure after turbine trip.
11. Where trust bearing is provided?
Trust bearing is provided between HP turbine and LP turbine rotor.
12. How dissolved oxygen control is achieved in feed water system?
Hydrazine is added to feed water system to control dissolved oxygen.
13. How seal oil pressure is maintained?
Differential pressure regulator maintains the seal oil pressure at 0.7 kg / cm2 higher
than H2 pressure.
Question and answers Electrical Maintenance Unit
- 98 -
14. What is used to purge hydrogen from the generator casing?
During generator purging CO2 is used to purge out H2 from the casing.
Question and answers Electrical Maintenance Unit
- 99 -
15. Why class B trip is provided?
Class B trip is provided to prevent damage and over speeding of the turbine.
16. How lub oil supply is maintained?
Lubrication oil is supply is maintained by outlet oil from turbine oil pumps during
normal operation and jacking oil pump during startup.
17. What is the function of speeder gear?
Speed raising beyond governor takeover speed upto full speed is achieved by raising
and lowering the speeder gear.
18. How gland-sealing steam is supplied?
Gland sealing speed is supplied from main steam line.
19. Why exhaust sprays are provided?
Over heating of last stage LP blades is avoided by exhaust sprays by CEP.
20. What is the use of vacuum breaker?
In case of loss of seal oil to generator seals vacuum breaker is used to bring TG to
rest very quickly.
21. How relay oil is supplied?
Relay oil is supplied from the main oil pump for the operation of governing system.
Question and answers Electrical Maintenance Unit
- 100 -
Electrical system
1. What are the main two divisions of MAPS electrical system and what do you
understand by it?
The two main divisions of MAPS electrical system are
a. Main output system. Output system supplies power to the grid. Generated voltage
is stepped up to 220 kV from 16.5 kV and supplied to grid.
b. Station service system. This system supplies the load inside the power station.
The generated voltage is stepped down to 6.6 kV and 415 V from 16.5 kV and
supplies to auxiliary loads.
2. List out the components of station output system.
Main generator, Generator transformer, PT, CT, CVT, lightning arrestor, wave trap,
main 220 kV bus, transfer bus, SF6 circuit breakers and isolators, line protection
scheme, GT and Generator protection scheme, bus bar protection scheme etc.
3. Why earth switches are provided in 220 kV bays?
When bay CB trips, both end (station and grid) CB will trip. The earth switches are
provided because the grid will always be alive so to prevent any shocks to the
operator or maintenance personnel who is working on the line or bay due to
accidental energizing of the bus.
4. What is the purpose of CVT (capacitance voltage transformer)?
Purposes of CVT are
a. To indicate if line is charged or not.
b. To synchronize grid with generator.
c. For power line communication and carrier tripping.
5. What are the protections provided for 220 kV lines and bus bars?
a. Bus bar differential protection.
b. Distance protection.
c. Over current protection.
d. Earth fault protection.
6. What are the main sources of power supply to 6.6 kV buses?
a. Unit transformer which steps down the generated voltage to 6.6 kV from the
generator.
b. Start up transformer, which steps down the grid voltage to 6.6 kV.
7. List some important loads to 6.6 kV buses.
a. Auxiliary transformers.
b. PHT motors.
c. BFP motors.
Question and answers Electrical Maintenance Unit
- 101 -
d. CEP motors.
e. CCW motors.
f. Chiller motors.
g. Pressuring pump motors.
Question and answers Electrical Maintenance Unit
- 102 -
8. What type breakers are provided in 6.6 kV buses?
ABB. Make, SF6 gas, 1250A and 2000A capacity circuit breakers are provided in
6.6 kV buses.
9. What is the difference in action of lock out pressure signal on 6.6 kV and 220 kV
breakers?
When lock out signal comes to 6.6 kV breakers the breaker will trip. Where as in
case of 220 kV breakers the breaker will not trip. If the breaker is open it will be
open only and can not be closed. If it is in closed condition it will be closed.
10. For how long 220 V DC batteries can supply power UPS?
220 V DC batteries can supply Power UPS for 30 minutes. Within this time class III
power supply should be restored by DG’s.
11. What do you understand by station black out?
When class IV and class III power supply fails and DG’s cannot be started and also
this condition prevails for 5 minutes then it is called station black out condition.
12. What are the sources of power supply to class I bus?
a. Through control UPS 240 V AC.
b. Through control UPS 220 V DC backed by 220 V batteries.
c. Through control UPS 48 V DC backed by 48 V batteries.
13. What are the lighting systems adopted in KGS?
There are two systems.
a. Normal lighting with class IV power supply.
b. Emergency lighting with class II power supplies and in control room with class I
power supplies.
Question and answers Electrical Maintenance Unit
- 103 -
Measuring instruments
1. What are the two main classifications of analog instruments?
The two main classifications of instruments are,
a. Absolute instruments. Example tangent galvanometer.
b. Secondary instruments. Example ammeter, voltmeter. Analog instruments are
classified according to their electrical quantity they measure. Example frequency
meter, voltmeter, etc. Principles they work are moving coil, induction.
2. What are three types of secondary instruments?
The three types of secondary instruments are,
a. Indicating type: It only indicates the electrical quantity measured. Example:
Ammeter, Voltmeter, Frequency meter etc.
b. Integrating type: It integrates (sums up) the quantity being measured. Example:
Energy meter.
c. Recording meter: It records as well as indicates the electrical quantity being
measured. Example: 3 pen graphical recorder.
3. Give three operating forces acting on indicating instruments.
a. Deflecting force.
b. Controlling force.
c. Damping force.
4. What are the advantages of digital instruments over analog instruments?
a. Human errors are avoided (comparative error) because the output is displayed in
form of numbers.
b. Power consumption of digital meters are low as compared to analog meters.
5. What is the range of resistances that can be measured using following.
a. Wheatstone bridge – 1 milli Ω to 11 MΩ.
b. Kelvins double bridge – 0.2 micro Ω to 11 Ω.
c. Megger – Insulation resistances more than 100 kΩ
6. What do you understand by tan delta for a insulating material?
Tan delta measurement is done to find the qualities of insulating material. Tan delta
is angle between current due to surface leakage or current due to capacitance and the
capacitive current. That is Tan δ = Ir / Ic.
7. For what purposes transformer ratio meter can be used?
Transformer ratio meter can be used for,
a. To find the ratio of a transformer.
b. To find the phase angle deviation of primary and secondary voltage of
transformer.
Question and answers Electrical Maintenance Unit
- 104 -
c. To find the magnitude of magnetizing currents.
Question and answers Electrical Maintenance Unit
- 105 -
8. Draw connection diagram of ammeter, voltmeter, energy meter, and wattmeter.
9. Illustrate how can you use a single-phase wattmeter to measure 3 phase reactive
power in a circuit?
We can measure reactive power of 3 phase circuit by dingle phase wattmeter by
connecting the current coil in series with a line or load and connecting the pressure
coil across the other two lines.
Reactive power = 3√ V * I * sinϕ Watts.
10. Draw the basic block diagram of digital meter and explain the function of each
block.
Alternator A/D converter BCD counter decoder & LCD display
Vx
Alternator: It reduces the unknown voltage to a small value. Because the reference
voltage is very less and the unknown voltage is maximum.
A/D converter: It converts the analog signal from alternator to digital signals.
BCD counter: It counts the number of pulses (binary counter).
Decoder and display: It decodes the binary code to decimal form and gives a visual
display of it.
11. Draw a neat sketch and explain the use of CT and PT for measurement of power in a
single-phase circuit?
If wattmeter of proper range is not available or if voltage and current ranges are high
we can usr CT and PT of suitable ratio. Connect the CT and PT as shown in figure.
The reading of wattmeter can be multiplied by the ratio to get the actual power.
CT PT
CC
WATT METER
PC
Question and answers Electrical Maintenance Unit
- 106 -
12. Explain the construction and working of moving coil instrument.
Construction: The moving part is a coil wound on a light aluminium frame,
mounted on a shaft made of stainless steel which is pivoted at either ends on jewel
bearing made of sapphire. The coil is placed between poles of a permanent magnet.
Moving system is made light as far as possible to have high torque and weight ratio.
There are two phosphor bronze springs of very less resistance. This is used as
terminals for the current to pass through the coil and out of coil. It is also serves the
purpose of control force.
Aluminium coil former acts as a damping device by eddy current damping. There is
a knife edge pointer and a counter weight to avoid its sagging.
Working: When ever a current carrying conductor is placed in a magnetic field a
force is experiences by the conductor. Moving coil meters work on this principle.
Force = BINL
As the BNL is constant, force (F) is directly proportional to current (I).
That is FαI. Where B is magnetic flux, N is number of turns and L is length of coil.
13. Explain the procedure for measurement of earth resistance.
14. Explain the working principle of wheat stone’s bridge along with equations under
balanced condition. B
P kG Q
I1 I1
A I2 G
I2 D
X S
C
Wheat stone’s bridge works on kirchoff’s law. It is used to measure medium range
resistances. P and Q are fixed standard resistances. S is standard variable resistances.
X is the unknown resistance. G is galvanometer, kG is galvanometer switch and kB
is battery switch. No current will flow through galvanometer if the potentials across
its terminals are equal. So there will be no deflection of galvanometer. This condition
is called the balanced condition.
This is achieved by varying S and also by varying P/Q ratio.
At balanced condition VAB = VAC And VBD = VCD
I1
*
P = I2*X & I1*Q = I2*S
Dividing both I1
*
P = I2*X
I1*Q = I2*S
Question and answers Electrical Maintenance Unit
- 107 -
= P/Q = X/S
Unknown resistance (X) = P/Q * S Ω
15. Explain the working principle of Kelvins double bridge and procedure for the
measurement of terminal resistance.
Question and answers Electrical Maintenance Unit
- 108 -
Protective relays and application
1. What you mean by accuracy limit factor?
The ratio between the accuracy limited primary current to rated primary current is
called the accuracy limit factor.
2. What is the characteristic of inverse time over current relay?
If the fault current increases the time of the operation of the relay will be decreases.
3. What are the two errors in instrument transformer?
a. Ratio error.
b. Phase angle error.
4. Where core balance CT is used?
Core balance CT is used in earth fault protection.
5. Define knee point voltage of a CT.
When the primary of a CT is open circuited and supply (variable) of system
frequency is given to secondary, then a 10% increase in voltage constitutes 50%
increase in current. That voltage is the knee point voltage.
At this point the core is saturated and a little increase in voltage constitutes a great
increase in current. kpv decides the opening range of the CT. Above kpv the ratio of
transformer will not be applicable.
kpv = RCT + RLEADS + RRELAY
6. What do you mean by the term 5P10?
This indicates the type of relay, Its % error and accuracy limit factor.
5 – composite error (Phase angle error + ratio error) 5%.
P – Protection CT.
10 – Accuracy limit factor.
7. Mention the important properties of relay contacts.
a. Should be robust in construction.
b. Self-cleaning (oxides easily breakdown).
c. Corrosion resistant.
d. Bounces free and striction free (low contact resistance).
e. Able to carry rated continuous current and short time rated current.
8. What is a composite error and write down the formula for composite error?
Basically composite error = Ratio error + Phase angle error. It is the ratio error
integrated over one cycle at steady state of operation.
Composite error =100 * 1 oςT (kn * Is – Ip)2 dt
Question and answers Electrical Maintenance Unit
- 109 -
T Ip
Question and answers Electrical Maintenance Unit
- 110 -
9. Define pickup value and reset value.
Pickup value: It is the smallest value of actuating quantity when its value is increased
from zero to pickup value, the relay will energise.
Drop out value: It is the largest value of the actuating quantity when its value is
decreased from pickup value, the relay will reset or de-energize.
10. Draw the circuit diagram for finding out the knee point voltage and explain the
procedure.
0 – 5 A
A CT
V 0 – 300V Sec Primary
240 V AC
Variac V Saturation
kpv = RCT + RLEADS + RRELAY
Knee point
Ankle point A
Connect the circuit as shown. O/P of variac should be zero. Increase it to 5 Volts and
take down the value of current from the ammeter. Now increase the voltage by 10%
(5 + 10% = 5.5 V) and take the current reading. Now increase the voltage by 10%
(5.5 V +0.55 V =6.05 V) and note down the current. Now keep on increasing voltage
by 10% and note down current reading. At some value there will be 50% increase in
current for 10% increase in voltage.
Example 40 V􀃆 0.2 A
40.4 V􀃆 0.3 A (0.2 + 50% = 0.3 A).
That point is the knee point voltage of that particular CT. From this point onwards a
little increase in voltage will lead to a large increase in current, because the core is
saturated fully. When we plot all the values on a graph taking current as X-axis and
voltage as Y-axis, we will get the above graph. Protective relays operate between
ankle point and knee point. Above this they cannot detect the fault correctly.
Measuring CT operate in the ankle region.
Question and answers Electrical Maintenance Unit
- 111 -
11. Explain the procedure for finding out the polarity and ratio test in a CT with circuit
diagram.
Polarity test: Connect the circuit as shown in figure with a battery, switch and
AVOmeter. Now momentarily close the switch S and see the deflection in the
AVOmeter. If it is in the direction as shown in the figure, then the polarity of the CT
is correct. If it is in opposite direction the polarity of CT is not correct. Polarity test is
very important because if polarity is not correct in differential protection the relay
will fail to act when fault occurs.
Ratio test: Connect circuit as shown in figure (2). Slowly increase the current. Take
down the readings of A1 and A2. Then see whether it confirms to reading of
nameplate. Ratio = A1/A2.
SECONDARY INJECTION KIT
+AVO - A A1
0 – 30 A
+ - 240 V AC
S1 S2
P1 P2
+ -
S B
POLARITY TEST (FIG 1) Fig – 2 Ratio test
Ratio – A1 : A2 A2
A 0 – 15A
12. Explain the principle of operation of attracted armature relay with equation and
characteristics curve.
Principle: It works on the principle that when a current is passed through a coil
magnetic lines of force develop and the coil behaves like a magnet. When we place a
magnetic material inside the coil it is attracted.
In attracted armature type of relays there is a spring that keeps the contact open, a
plunger that tends to close the contact and a coil through which current is passed.
The spring force and magnetic force oppose each other. When these both are equal
the relay will pickups.
At verge (time) of pickup Instantaneous select
k1 I2 = k2
f = k1 I2 = k2 Time Time delay select
I = k2 / k1
Where f – force.
k1 – magnetic force constant.
k2 – spring tension constant. current
I – current in the coil.
Question and answers Electrical Maintenance Unit
- 112 -
We can see the inverse characteristics from the above formulae. Usually attracted
armature relays are instantaneous. That is there is no intentional (fixed) time delay. If
we want a time delay we can add a slug in the armature core.
Question and answers Electrical Maintenance Unit
- 113 -
13. Mention the initial commissioning checks on CT’s, PT’s and relays.
Commissioning checks on
CT
a) Terminal marking correctness.
b) Polarity of terminals.
c) Insulation resistance between primary and secondary.
d) Insulation resistance between primary to earth and secondary to earth.
e) Magnetization characteristic and knee point voltage test.
f) Ratio test.
PT
a) Terminal markings.
b) Polarity checks of terminals.
c) Insulation resistance between primary and secondary.
d) Insulation resistance between primary to earth and secondary to earth.
e) Ratio test.
f) Whether PT can supply as per the burden of load check.
RELAYS
a) Pickup and dropout value check.
b) Insulation resistance of contacts and relay coil.
c) Time delay (if relay is not instantaneous), operating time value check of relay.
d) See that the correct circuit breaker trips on energisation of the particular relay.
e) Continuity checks of contacts after energisation of relay.
f) See if plug-shorting contacts are correct.
g) See if CT’s and PT’s are corrected in correct polarity.
h) Burden check of relay.
i) Primary injection test.
j) Secondary injection test.
Question and answers Electrical Maintenance Unit
- 114 -
14. Explain with simple diagram the core balance CT.
In core balance CT all the three phases go through the core and the resultant
magnetic flux is zero. Because the flux of three phases cancel each other. So the
secondary output of CT is zero and the relay will not energise.
When there is a earth fault in one of the phase the fluxes cannot balance each other
and there is a voltage induced in secondary of the CT and the relay is energised to
trip the circuit. Saturation is no problem because the core size is very big.
+R
Ground fault
R R Y
Relay dropped Relay pickup
B R
R Y B R Y B - R
Normal operation. During earth fault. Resultant diagram.
Question and answers Electrical Maintenance Unit
- 115 -
Logics and circuits
1. Give the definition of following.
27C Closing circuit supervisory relay
27T Tripping circuit supervisory relay
3C Interposing relay (closing coil)
3T Tripping coil
52 AC circuit breaker
88 Auxillary motor (spring charging motor)
52Y Anti-pumping relay
86.1 Lockout relay
42 Main contactor
50 Instantaneous over current relay
50N Earth fault relay
94 Trip or Trip free relay
49 Thermal overload relay
49S Stalling protection relay
27 Supervisory relay
64 Ground protection relay
2. What is the operating voltage of 3C?
48V DC.
3. DC relay coil or contactor coils must be connected to which side?
Negative side of the DC supply to avoid galvanic effect on the coil, which will corrode the coil.
4. How special current limiting resistance is connected with the seal in contact?
Special current limiting resistance is connected in series with the seal in contact.
5. How you will connect start and stop push button to control the motor from two different places?
Start push button should be connected in parallel and stop push button in series in the circuit.
6. What are the basic principles of ED?
Basic principles of ED are,
a) All the contacts of corresponding relays and contactors are shown in de-energised condition.
b) Control circuit gives us idea about ON / OFF selection of motor, fuse rating, forward reverse
control, seal in protections etc.
c) Power circuits are drawn in thick lines and control circuits are drawn in thin lines.
d) When relay or contactor energises normally open contact closes and normally closed contact
opens.
e) Auxillary contacts acts with main device such as contactors and relay.
7. What is anti pumping?
When a breaker is closed on fault condition there will be continuous tripping and closing of the
breaker because 3C is energized. Anti pumping in circuit avoids frequent tripping and closing of
circuit breaker when the breaker is closed in fault condition.
Question and answers Electrical Maintenance Unit
- 116 -
Switchgear
1. Mention the commissioning tests on breaker and bus bars.
Breaker
a. Milli volt drops test between the interrupting contacts and between the isolator
contacts.
b. Closing and opening timing of the breaker for 5 times.
c. Checking whether the breaker trips or closes when the logics are fulfilled.
Bus bars
a. Milli volts drop test for the contact resistance value.
b. Tightness of the joints.
c. IR values between phase to phase and phase to ground.
2. Explain clearly the three positions in 415 V breaker.
a. Service position: Power connections and control connections are available to the
breaker.
b. Test position: Power connections are cut off but control connections are available
to the breaker and it can be tested.
c. Disconnect position or rack out position: This is for maintenance of the breaker
and in this positions both the control and power connections are not available.
3. What do mean by trip free system in breaker?
In trip free the breaker is free to trip at any time. If both close and trip signal is
present at same time (instant) the breaker will attempt to close and positively trip.
When the breaker trips it will not close again even if closing signal exists because of
anti pumping feature.
4. What is the purpose of spring charging in 415 V breaker?
If the breaker is to be closed and tripped manually the closing time and tripping time
would vary from person to person. Also it would not be very fast. So spring charging
is provided. It gives uniform timings irrespective of the operator and its action is fast
and closing and tripping time is very less.
Question and answers Electrical Maintenance Unit
- 117 -
5. What are the built in protections provided in 415 V breaker?
a. DINF (making current magnetic release)
This consists of a laminated magnetic circuit. This is placed under the lower
current terminal pole. This is provided for all the three poles. It has a core that
rotates in the air gap. It is held by spring. During protection the magnetic forces
developed overcome the spring tension and the core is attracted. The mechanical
force developed is used to trip the breaker. This protection acts during the closing
of breaker if any fault exists. The current is set to 5 times the rated current.
b. DIRS (short time magnetic release)
The construction is same as DINF, but it has a mechanical timer, which can be set
accordingly. This protection acts when any fault comes during breaker in service.
The current rating is set to 3 to 8 times the rated current.
c. DIT – S (thermal over load protection)
This consists of a three bimetallic strip, which gets heated up when over loaded
and trips the breaker by a lever. It is placed in front of the breaker. Setting range
is 60% to 100%.
Question and answers Electrical Maintenance Unit
- 118 -
MCC
1. What are the advantages of MCC?
a. Starters and contactors all will be a standard size.
b. Spares inventory will be less.
c. Cost of cables will be less because same size of cable is used for all capacity and
gland holes can be provided before hand.
d. Maintenance and trouble shooting is easier in MCC.
2. What type of motor starting adopted in MCC?
DOL (direct on line) starter.
3. What is the purpose of grounding secondary of the control transformer?
To protect the operating personnel from high induced voltage.
4. Based on what factors will you select rating of components for a starter cell?
Factors for selecting rating of components are,
a. Capacity of load.
b. Type of starting.
c. Duty (continuous or intermittent).
d. Type of protection.
e. Nature of starting (acceleration time is slow or fast).
5. What maintenance checks you will do for an MCC cells and MCC panel?
Maintenance checks on MCC cells
a. Ensure that the load is tripped from control room and switch is in off position.
Switch off the isolator at MCC cell.
b. Open the door and rack out the cell into isolation position.
c. Check the tightness of terminal of contactor, 3C, control transformer, control
fuses, wipe in contacts, power cables, etc.
d. Check the tightness of component mounted.
e. Look for any charred components or terminals.
f. Check the IR value of 3C, contactor, control transformer, isolator etc.
g. Check the isolator double switch feature.
h. Check the OLR and calibrate the OLR.
i. Check the pick and drop out value of contactor, 3C.
j. Check the fuses for healthiness and fuse carriers for proper contacts.
k. Clean the arc-chutes of the contactor and clean all the components of the MCC
cell properly.
l. Check the resistances of control transformer, contactor, 3C etc.
m. Check the tightness of control cable at main TB compartment.
Question and answers Electrical Maintenance Unit
- 119 -
Maintenance on MCC panel.
a. Ensure the permit and all isolations.
b. Open the bus bar chamber and discharge the bus bar.
c. Disconnect the cables connected to bus bar and take the IR value of bus bar and
cable individually. Connect it properly and tight it to proper torque.
d. Check the tightness of nut and bolts and cables connected to buses.
e. Open the main TB compartment and check the tightness of all cables and clean it.
f. See the tightness of power terminal compartment and clean it.
g. Check that cables are supported properly.
h. Do checks on CT, PT used for indication purposes.
i. Clean the entire MCC panel properly and take the IR value.
j. Carry the checks on relays, which are used in the MCC panel.
k. See for proper earthing connection and tightness of the earthing connections.
l. See for proper house keeping.
6. What is the difference between an auto reset and manual reset overload relay?
a. Auto reset relay closes its contacts when the bimetallic strip gets cooled. In
manual reset relay we have to manually reset the relay because even though
bimetallic strip cools its contacts are not closing without manual reset. L & T type
OLR have only manual reset and siemens type has both manual and auto facility.
b. Auto reset over load relay is reset by switching OFF the respective had switch
and again switching it ON.
c. Manual over load relay is reseted by pushing the reset button provided on the
MCC cell.
Question and answers Electrical Maintenance Unit
- 120 -
Batteries and charger
1. How you will prepare electrolyte for a lead acid battery?
While preparing electrolyte for lead acid battery sulphuric acid is added to distilled
water.
2. How battery capacity is expressed?
Always battery capacity is expressed in Ampere – hour.
3. What is the instrument used to measure the specific gravity?
The instrument used to measure the specific gravity is called Hydrometer.
4. What you mean by SCR?
SCR is meant for silicon controlled rectifier.
5. Define specific gravity and mention the specific gravity of a fully charged lead acid
battery?
Specific gravity of a substance is the comparison of density of the substance with the
density of pure water.
Specific gravity = Density of the substance / density of pure water.
= kg / cm2
kg / cm2
= (No unit)
Specific gravity is only number. It has no unit.
Specific gravity of pure water is one.
Specific gravity of fully charged lead acid battery is 1.215. Specific gravity should
always be corrected to 27°C.
Corrected specific gravity is equal to indicated specific gravity ± (t - 27°C)*0.0007.
Indicated specific gravity = 1.205 and ‘t’ means electrolyte temperature.
6. What are the parts of the battery?
Parts of the battery are
a. Battery container.
b. Battery cover.
c. Positive plate (Pb o2).
d. Negative plate (Pb).
e. Cell connector.
f. Grid.
g. Cell separator (porous material).
h. Sediment chamber.
i. Positive and negative terminals.
j. Vent plugs.
Question and answers Electrical Maintenance Unit
- 121 -
k. Dilutes sulphuric acid (electrolyte).
Question and answers Electrical Maintenance Unit
- 122 -
7. What are the indications of a fully charged cell?
a. The colour of the + ve plates will be dark brown. This can be seen only if the
battery has transparent cover.
b. Voltage per cell will be a 2.15 volts.
c. Gassing in the will electrolyte will indicate. But the current is splitting up water to
H2 and O2. Because the positive and negative plates are fully converted to their
original constituents.
8. What are the difference between primary cell and secondary cell?
Primary cell: The electrolyte in primary cell is chemically irreversible. That is once
the cell is discharged it cannot be recharged. It should be replaced with a new cell.
The cells can supply only low currents and have low efficiency. They supply
intermittent current. Their internal resistance is more. These cells are comparatively
cheap.
Secondary cell: These cells are chemically reversible. They can be discharged and
charged. They can supply large currents because their internal resistance is less.
These have high efficiency compare to primary cells. These can supply constant
current. These are comparatively costly.
9. What do you mean by sulphation? And what are the effects of sulphation?
Sulphation: During normal discharge of battery Pb so4 is formed. This Pb so4 is
chemically reversible by passing current. These split up to their original constituents.
But under certain condition crystalline lead sulphate is formed (Example: under
charging after some time without trickle charging). This Pb so4 is chemically
irreversible. So if the sulphation occurs the battery life decreases. Efficiency
decreases and the active material starts falling of the grid.
10. Write down the equation for Nickel cadmium battery.
Equation for Nickel cadmium battery.
Ni (OH4) + Cd +2 kOH 􀃆Ni (OH2) + Cd OH2 + kOH (during charging)
(Nickel hydrate + cadmium + potassium hydroxide 􀃆 Nickel hydroxide + cadmium
hydroxide + potassium hydroxide.)
Ni (OH2) + Cd OH2 + kOH 􀃆 Ni (OH4) + Cd +2 kOH (during discharge)
We see that there is no change in electrolyte. It just acts as a catalyst. So there is no
need to change the electrolyte.
Question and answers Electrical Maintenance Unit
- 123 -
11. Write down the theory of lead acid battery.
A simple lead acid battery consists of positive and negative electrodes Immersed in
an electrolyte. The positive electrodes are Pbo2 (lead oxide) and the negative
electrodes are Pb (spongy lead). The electrolyte is dilute sulphuric acid.
On discharging the battery
Pbo2 + Pb +2 H2 so4 􀃆Pbso4 + Pbso4 + 2 H2o
Lead acid is converted into lead sulphate. Spongy lead is also converted into lead
sulphate and H2 so4 used up in the process. Only water is remain. So the specific
gravity of the cell comes down.
On charging the battery
Pbso4 + Pbso4 + 2 H2o 􀃆 Pbo2 + Pb +2 H2 so4
Here the products are converted to their original constituents and the acid is released.
So the specific gravity rises as the cell is charged. How much ever larger be the cell
the voltage of each cell will be approx. 2.15 V when fully charged.
The positive plate is made of a paste lead oxide, lead sulphate that is fitted in a mesh
like material and is connected to grid. All positive plates are made common and
connected to a grid.
The negative plate is made of spongy lead also it is in mesh and connected to grid.
These are also grouped together.
These plates are separated by a micro porous separator for the diffusion of
electrolyte.
The electrolyte is prepared by adding sulphuric acid to distilled water drops by drop
and stirring it until the reasoned specific gravity is attained.
Every thing is placed in a container of hard rubber. The cells of a battery are
connected by a cell connector. The container is leak proof.
12. What are the parts of a 48V DC charger?
Main transformer: This steps down the 3Φ 415V supply to the require value of
voltage.
Synchronizing transformer for phase sequence: This gives the synchronizing signal
to the firing card. That is, the pulses from this card if fed to the firing card. The firing
card gives pulses to the SCR of R or Y or B depending upon which phase is positive
maximum.
Half control module: This has a diode and a SCR for each phase. The firing card
controls the firing angle of SCR.
Firing card: This gives the firing pulses to SCR depending on phase sequence and
the feed back from output.
Controller card: This card monitors the output and gives signal to firing card to
conduct at certain angle to maintain constant output voltage.
Power supply card: This gives power supply for the controller card, firing card and
protection.
Question and answers Electrical Maintenance Unit
- 124 -
13. Explain the operation of 48 V battery charger.
The supply for the charger is from MCC. The supply is tapped for power supply to
control card, PF correction capacitor. LC filter is used for suppressing surge voltage.
The main supply is stepped down and given to the half control rectifier module. The
SCR conducts only when gate gets positive pulse. This pulse is given by pulse
transformer, which gets pulses from firing card. Firing card gives pulse to the
respective RYB SCR only when their phases are positive maximum. The freewheel
diode is incorporated to protect the SCR and diodes from back emf when supply to
coils is cut off due to collapsing magnetic field.
The filter is provided to smoothen the ripple output and the bleeder is used for
voltage regulation. It gives improved voltage regulation and acts as a minimum load.
Also it keeps the SCR in conducting state by drawing the minimum current which is
higher than the SCR holding current. Thus there is always output voltage irrespective
of load.
DC CT is used for limiting output current. It works on principle of magnetic
amplifier. There is also provision for smooth rising of output voltage.
14. What is purpose of freewheeling diode and DC filter circuit in the charger?
Freewheeling diode is used to protect the semiconductor components used in the
charger from the back emf, which is induced in the inductive coils of relays when the
supply to the relays is cut off. The magnetic field in the relays collapses and induces
high voltage in reverse direction. This emf is shunted by the freewheeling diode,
which is connected in reverse bios with the output.
DC filter is used to smoothen the output, which has ripple. Ripple frequency is same
as system frequency for half wave rectifier and 2 times of system frequency for full
wave rectifier. The filter, which is a capacitor, will oppose any change in voltage.
Thus the ripple will not be allowed to come to zero.
Question and answers Electrical Maintenance Unit
- 125 -
Electrical equipment fundamental
1. Why indoor switchyard is provided in MAPS?
The salt contamination in the switchyard is avoided by providing indoor switchyard
in MAPS. Because the plant is just 300 metres away from the seashore and the
atmosphere is saline. This salt will get deposited on the insulators and on the
conductors used in the switchyard. Due to this deposition insulators may fail to
unnecessary trip the system and conductor used must be copper for better
performance instead of low cost aluminum. So to avoid unnecessary trip and to have
low cost of installation and spare parts of aluminium indoor switchyard is used.
2. What do ABCB and ACB mean?
ABCB – Air blast circuit breaker.
ACB – Air circuit breaker.
3. What do you mean by frequency?
The number of cycles per second is called the frequency.
4. State the voltage and current relation in star and delta connection.
In star connection line current is equal to the phase current and line voltage is √3
times that of phase voltage.
In delta connection line voltage is equal to the phase voltage and line current is √3
times that of phase current.
5. In DC motor what is the relation between speed and field flux?
Speed of a DC motor is inversely proportional to the field flux.
6. What is the difference between self-excited and separately excited DC generator?
Self-excited generator: In a self-excited generator the field winding is excited by an
external DC source like a battery etc.
Separately excited generator: In a separately excited generator the field poles have
some residual magnetism. When the armature is rotated a small emf is induced in it.
This is fed to the field winding and if the current direction is such that it adds the
residual magnetic flux to the field winding and the field strength is increased. The
more emf in the armature, which is again fed to the field winding and goes on till the
generator builds up voltage.
Question and answers Electrical Maintenance Unit
- 126 -
Power and control cables.
1. Define conductor.
Conductor: A material of low resistance used to transmit electrical energy. Examle
wires, cables, bus bars etc.
2. Define unprotected insulated wire.
Unprotected insulated wire: Unprotected insulated wire is which the insulation of the
wire is not covered by a protective sheathing to prevent it from mechanical damage.
3. Define cable.
Cable: One or more insulated conductor enclosed in a protective mechanical
sheathing of either GI wire or GI strip or aluminium to protect the insulation from
mechanical damage.
4. Define insulated wire.
Insulated wire: A conductor or multi-stranded conductor which has a insulating
material on it is called a insulated wire.
5. Explain briefly about armouring for an under grounded cable.
Armouring is required to protect the cores from mechanical damage.
6. Explain briefly about grounding of cable trays.
Cable trays are grounded because to avoid any shocks to personnel incase of leakage.
A grounding wire runs at the side of tray through a parallel groove clamp through out
the length of the cable tray. If trays are one above another we can loop up the
grounding wire to the tray below. This saves extra ground wire.
7. What are the differences between the power and control cable?
Power cable: It is used for supplying current to load. It is of larger current carrying
capacity available in single core, 2 cores, 3 cores, 3 cores, and 4 cores. Single core
is available upto 1000 mm2. Usually power cables are of aluminium. These cables
are graded for higher voltages and possess more cross section area.
Control cable: Control cables are used for control purposes for logics, indication or
annunciation etc. These are of lower current carrying capacity and voltage grading is
also less. These are of less cross sectional area are available in pairs of 2,5,10,25,50
etc.
8. What is the purpose of using corrosion inhibiting compound?
It is used for aluminium conductors while crimping to a lug or ferrule. It prevents
corrosion of aluminium conductor due to oxidation and due to saline atmosphere.
9. Why aluminium armouring for single core 1000 mm2 is used?
Question and answers Electrical Maintenance Unit
- 127 -
Aluminium armouring for single core 1000 mm2 is used so that heating will not take
place due to the flux around the conductor, as the aluminium is a non-magnetic
material.
Question and answers Electrical Maintenance Unit
- 128 -
10. What is resistance of copper compare to the aluminium?
Copper is less resistive than aluminium.
11. What is applied over the steel tape armour of PILC cable as serving?
Bituminous covered jute.
12. What is used as insulation for PILC cable?
Impregnated paper.
13. A small quantity of impurity reduces how much of conductivity of copper?
35% of conductivity will be reduced due a small impurity in the conductor.
14. Why cast aluminium tri-foil clamp is used in single core cables laying?
When three conductors are clamped together the fluxes around the conductors are get
cancelled
15. What are the parts of a cable gland?
a. Check nut.
b. Nipple.
c. Metal washer.
d. Neoprene rubber.
e. Metal washer.
f. Compression nut.
16. What are the advantages of PVC insulated cable?
a. Plumbing is not required. Joints can be made easily.
b. As PVC is light the injury caused to it while laying is less.
c. It is corrosion resistant.
d. It has high fire retarding property.
e. It does not break down even if moisture enters.
Question and answers Electrical Maintenance Unit
- 129 -
Basic electronics
1. How many types of logic gates are there?
a. OR gate.
b. AND gate.
c. NAND gate.
d. NOR gate.
e. Inverter gate.
f. Exclusive OR gate.
g. Equivalent gate.
Question and answers Electrical Maintenance Unit
- 130 -
Mechanical equipment fundamentals
1. Why feed valves are used?
Feed valves are used to prevent back flow.
2. What are the functions of a heat exchanger?
The function of heat exchanger is to transfer heat efficiently and economically
between two fluids. Heat is transferred from the fluid, which has higher temperature
to the fluid, which has lower temperature. The modes of heat transfer are,
a. Conduction – Heat transfer in solids by momentum of molecules.
b. Convection – Heat transfer in liquids by movement of molecules.
c. Radiation – Heat transfer by energy waves.
There are three types of flow in heat exchangers
a. Parallel flow.
b. Counter flow.
c. Transverse flow.
3. Why baffle plates are used in heat exchanger?
Baffle plates are used in heat exchanger so that the maximum heat can be transferred
and to avoid tube sagging.
4. How pumps are classified?
A. Centrifugal pumps – a. Single volute
b. Double volute
c. Diffuser type
d. Mixed flow
e. Axial flow
f. Turbine or regenerative type
B. Rotating pumps a. Screw type
b. Gear type
c. Vane type
C. Reciprocating pumps a. Piston
b. Plunger
c. Bucket
5. What you mean by cavitation and NPSH?
Cavitation: Bubbles form in the liquids whenever there is pressure reduction inside
the pump. These bubbles collapse when they approach high-pressure areas damaging
pump internals. This is called the cavitation.
NPSH: Net Positive Suction Heat. It is the head available at the eye of the impeller
corrected to vapour pressure.
Question and answers Electrical Maintenance Unit
- 131 -
6. Name the functions of the valve?
a. ON and OFF service.
b. Throttling or regulating liquid flow.
c. Avoid back flow.
d. Regulating pressure.
e. Relieving pressure.
7. What are the advantages of butterfly valve?
a. Less holdup.
b. No support needed.
c. Any actuator can be used.
d. Quick opening and closing.
e. Less space required.
f. Used for low-pressure low temperature and large pipelines.
Question and answers Electrical Maintenance Unit
- 132 -
Instrumentation fundamentals
1. What are the classifications of industrial instrumentation?
a. Information gathering instrumentation.
b. Regulating instrumentation.
c. Protective instrumentation.
2. What are the units of pressure?
Pounds / inch2 and kg / cm2.
3. What is the use of BAROMETER?
Barometer is used to measure atmospheric pressure.
4. What are the methods used to measure the flow?
Mechanical (float) type and ultrasonic type methods are used to measure the flow.
5. What is the equivalent of atmospheric pressure?
One atmospheric pressure is equal to 10 meters of water column or 760 mm of
mercury.
6. What method is used to measure the level?
Bubbler method is used to measure the level.
7. State some elements of pressure measurement.
Manometer, Diaphragm gauges, Bellows, Strain gauges etc.
8. State some elements of flow measurement.
Orifice, Venturi tubes, flowrator (rotameter) etc.
9. State some thermocouple.
Copper – constantan, Iron – constantan.
10. What is the purpose of instruments?
The purpose of instruments is to measure, safeguard the process for efficient plant
operation.
Instruments are very accurate and fast acting. This accuracy and speed is not possible
by human. Also in some places there may be too much heat for man to work or some
where there may high radiation field. In such cases instruments provide remote
operation.
11. What is primary element and what should be its response?
Primary element is one, which senses the condition of process, and converts it to
some other form, which can be measured accurately. Example in a bourden gauge
the pressure if changed to the uncoiling (displacement), which can be measured.
Question and answers Electrical Maintenance Unit
- 133 -
The response of primary element is that it should convert the condition in to some
other form, which can be interpreted and measured easily.
Question and answers Electrical Maintenance Unit
- 134 -
12. Name some process variables, which are appropriate for our plant with examples.
Process variables with examples, which are appropriate to our plant, are
a. Flow – flow of D2O in PHT system.
b. Temperature – temperature of coolant in PHT system.
c. Level – moderator level.
d. Speed – speed of turbine.
e. Voltage – voltage generated by main generator.
f. Neutron flux – number of neutrons produced in reactor during operation.
g. pH – pH of moderator.
13. What is use of 2/3 logic in our plant?
All our protection instruments (system) are triplicated to have following uses.
a. To increase system integrity.
b. To decrease faulty trips.
c. Maintenance can be done on one protective instrument without shutting down the
whole system.
We don’t want our plant (reactor) to trip just because one instrument failed. So we
have triplication (2/3 logics) in protection instruments. The trip signal will pass if
only two out of three switches operate. Of only one operates there will be no trip.
This logic is used to trip the reactor in our plant.
14. What is resistance temperature detector (RTD) and mention some examples?
Resistance temperature detector is an instrument, which is used to measure
temperature. This uses the property that the resistance of a metal changes (increases
of decreases) with temperature. This is very accurate. These will be a wire, which
will senses the temperature and changes its resistance as the temperature changes.
This varying in resistances if measures by an external electronic or electrical circuit
calibrated to measure temperature.
Different types of RTD’s are Platinum, copper, nickel.
15. What is recorder and how it is useful to our plant?
Recorder is an instrument, which gives instantaneous values as well as records the
values.
Recorder can show us where a fault has occurred if reactor trips. It also gives us past
information recorded in it. It saves human effort because an operator cannot sit and
record the information required and it is very difficult task to an operator.
Question and answers Electrical Maintenance Unit
- 135 -
Fire fighting
1. How combustion takes place?
For combustion to take place three elements are needed. They are fuel, heat and
oxygen. This is called the triangle fire. Combustion can not survive without these
three. Remove any one of them, combustion ceases to take place. So wherever fuel,
oxygen and heat is there together combustion takes place.
2. How many types of extinction media’s are used in fire fighting?
a. Sand.
b. Water.
c. Foam.
d. Carbon – di – oxide.
e. Dry chemical powder.
f. Halons.
3. What are the classifications in fire?
a. Class A – Ordinary fire like burning of paper, wood etc.
b. Class B – Oil fire like burning of petrol, diesel, LPG etc.
c. Class C – Gas and dust fire like burning of butane, acetone, natural gas etc. and
burning of dust like uranium dust, sodium dust etc.
d. Class D – Metal fire like burning of uranium, thorium, sodium etc.
e. Class E – electric fire example transformer or switchgear fire etc.
4. How many types of fire extinguishers are there and state their suitability?
a. Soda acid type – suitable for Class A type of fires.
b. Foam type – suitable for Class A and Class B type of fires.
c. Carbon-di-oxide type – suitable for Class B, Class C and for Class E type of fires.
d. Dry chemical powder – suitable for Class B, Class C, Class D and Class E fires.
e. Halons BCF (bromo chloro difluoro methane) – suitable for Class A, Class B,
Class C and Class E types of fires.
5. At what areas of risk the Co2 flooding system, mulsifyre systems are provided?
Co2 flooding system is provided in diesel generator and turbine oil tank area.
Mulsifyre system is provided in generator transformer, start up transformer and unit
transformer areas.
6. What are the equipments kept inside the hose boxes?
a. Double female adapter (1 No).
b. Delivery hose pipe (50 feet – 2 Nos).
c. Branch pipe (1 No).
d. Valve wheel (1 No).
e. A hose box key (situated in a cabinet at side of hose box).
Question and answers Electrical Maintenance Unit
- 136 -
7. How water is used in a fire?
Water is used as a cooling effect in a fire.
Question and answers Electrical Maintenance Unit
- 137 -
8. How foam is used in a fire?
Foam is used as a blanketing effect in a fire.
9. Which extinguisher you use for electronic equipment fire?
Co2 or DCP type fire extinguisher can be used on fire involving electronic
equipments.
10. What you mean by starvation method?
Starvation method means elimination of fuel from the fire.
11. What is the name of powder used in Dry Chemical Powder extinguisher?
Sodium-bi-carbonate.
12. What you mean by cooling method?
Cooling method means elimination of heat from the fire.
13. What you mean by blanketing method?
Blanketing method means elimination of oxygen from the fire.
14. Why Co2 is used on Class E fire?
Co2 is a non-conductor of electricity.
Question and answers Electrical Maintenance Unit
- 138 -
First aid
1. What is the golden rule of first aid?
Do first thing first, artificial respiration, stop bleeding and treat shock. Do not
attempt too much, reassurance, avoid crowing and transfer.
2. What do you mean by diagnosis?
Determining the nature and courage of a disease.
3. For a bleeding what is the first aid?
Take care to stop the bleeding by giving pressure.
4. What is the first aid for bone injury?
Support the injured part and painkillers.
5. What is the first aid for burn cases?
Water, warm fluids should be given when the victim is conscious.
6. How we can differentiate the bleeding from artery and vein?
By the colour of the blood which is bleeding.
7. What is the first aid for chlorine inhaled victims?
Remove the victim from the source, fresh air and artificial respiration if necessary.
8. What is the first aid for dog bite?
Suck the wound and spite out.
9. What is the first aid for snakebite?
Bath the wound and constrictive bandage. Give warm drinks and rest to the patient
and artificial breathing if necessary.
Question and answers Electrical Maintenance Unit
- 139 -
D20 handling
1. What is the instrument name used for accurate measurement of IP?
Infra red spectro photometer.
2. How D20 vapour is recovered?
Dryer recovers D20 vapour.
3. What is the amount of D20 used in moderator?
140 tonnes.
4. Name the heavy water plants in India.
a. Nangal.
b. Kota.
c. Baroda.
d. Tuticorn.
e. Talcher.
f. Thal (under construction).
g. Hazira (under construction).
h. Malugum (under construction).
5. Define reactor grade and down graded D20.
Reactor grade D20: If the isotopic purity of a given D20 is more than or equal to
99.7% then the D20 is reactor grade D20.
Down grade D20: If the isotopic purity of a given D20 is less than 99.7% then the
D20 is downgraded.
6. What precautions should be taken while working in high tritium areas?
Use respirators, plastic suits, VP suits if concentration of tritium is very high. Avoid
getting hurt while working because tritium may go through the skin by sweat to the
blood. If by chance there is tritium intake in the body drink lots of fluids.
7. Why spillage of D20 is to be avoided?
Cost consideration: D20 very costly and very valuable. Cleaning of spillage also cost
and extra manpower to be deployed.
Tritium hazard: D20 contains tritium, which when spilled becomes tritiated vapour
and finds access through human body. Tritium is a radioactive material. It is a beta
emitter.
8. What is ice plugging?
If there is a need to repair a valve of D20 PHT system, there are no other valves to
shut of D20. So we use plastic bags on pipes and it has dry ice. Then liquid nitrogen
is poured inside the bag. Due to the low temperature the D20 inside pipeline
solidifies preventing any flow of D20 when valve is removed. This is called the ice
plugging.
Question and answers Electrical Maintenance Unit
- 140 -
Question and answers Electrical Maintenance Unit
- 141 -
9. Name the methods by which D20 leak can be detected.
a. By beetles.
b. D20 losses through stack monitoring.
c. Tritium monitoring.
d. In heat exchangers the leakage can be found by taking samples of process water
from all heat exchanges and counting the tritium activity.
10. Name the D20 recovery methods.
a. Manual mopping and vacuum cleaning.
b. Active drainage recovery.
c. Vacuum mopping recovery.
d. Dryers recovery.
e. Vapour recovery.
11. Name the features for reducing D20 leaks.
a. Reduce valves and fittings in the pipelines.
b. Use welded joints instead of flanged joint.
Question and answers Electrical Maintenance Unit
- 142 -
Nuclear reactor theory
1. State the law of conservation of mass and energy.
Mass and energy are interchangeable. When mass is lost there is a substantial gain in
energy and when energy is lost there is a increase in mass.
Energy = mass*C2
E = MC2
Where C is the conversion factor = 3*1010 (velocity of light)
C2 = 9*1020
2. Which of the following material is good moderator? Why?
a. H2 b. D2 c. H2O d. D2O e. Beryllium f. Graphite.
The functions of a good moderator are
a. It has to thermalise neutrons effectively.
b. There should be only a minimum absorption of neutrons.
c. It should not be toxic.
d. It should not be inflammable.
In case of Hydrogen (H2) though it is a effective sheatherer it cannot be used as a
moderator because it is a gas and there is a lot of distance between atoms. A neutron
cannot meet the nucleus in a definite manner.
For D2 also the same problem as this is also gas and it cannot be used as a moderator.
In case of H2O it is a good scatterer but is absorbs neutrons. Its moderation ratio is
72. So it cannot be used as a moderator.
In case of D2O though it is not as effective scatterer as that of H2O it has minimum
absorption of neutrons. It has a moderating ratio of 21000. This is an ideal
moderator.
In case of Beryllium it is a toxic material. Therefore cannot be used.
Graphite absorbs neutrons and is inflammable and therefore cannot be used.
So from the above statements the D2O is the good moderator material.
3. The activity of an Iodine – 131 is 10 curies. After how many half-lives will it come
down to 625 millicuries?
Activity of an Iodine – 131 = 10 curies
To find number of half-lives for coming it to 625 millicuries,
10 * 1st  = 5 (1st half-life)
5*  = 2.5 (2nd half-life)
2.5 *  = 1.25 (3rd half-life)
1.25 *  = 0.625 (4th half-life)
So during 4th half-life the Iodine – 131 reduces to 625 millicuries.
Question and answers Electrical Maintenance Unit
- 143 -
Question and answers Electrical Maintenance Unit
- 144 -
4. What do Atomic number and mixture mean?
Atomic number: The atomic number of an atom is the number of protons in that
atom.
Example – Hydrogen has one proton and its atomic number is one (1).
– Uranium has 92 protons and its atomic number is 92.
Mixture: It is a substance formed by different elements and these elements can be
separated by physical methods.
Example – Air is a mixture of oxygen and nitrogen and these can be separated by
physical methods.
5. What is the weight of a proton?
1.00759 amu (atomic mass unit)
6. What is the energy of a thermal neutron?
0.025 eV (energy volt)
7. What is the charge of an alpha particle?
2+.
Question and answers Electrical Maintenance Unit
- 145 -
Nuclear system
1. What is the purpose of moderator D2O?
The purposes of moderator D2O are,
a. To thermalise neutrons to maintain criticality.
b. Emergency core cooling when PHT fails.
c. Structural cooling.
2. What is the cooling water used in moderator heat exchanger during normal
operation? And during class IV failure?
During normal operation process LP water is used in moderator heat exchangers,
which transfers heat to seawater. During class IV failure firewater is used for the
moderator heat exchanger.
3. During loca how the cooling of fuel bundle is achieved?
During loca there is provision for taking D2O from the moderator system, which is
connected to PHT system for fuel cooling and there is one more option for the
cooling of the fuel from the fire water system.
4. How coolant flow is maintained in the event of loss of power to the PHT system?
When the PHT power fails, it takes two minutes for DG to come to full power. The
circulation is maintained by flywheel, which increases the de-acceleration and
maintains the flow for two minutes.
If there is a station blackout the flow is maintained by thermo-symphoning by which
more denser cold water comes down and less denser hot water goes up by convection
method.
5. What are the materials in contact with PHT system?
Piping – carbon steel.
Pressure tubes – zircalloy-2
Fuel cladding – zircalloy-2
End shield – stainless steel. Etc.
6. What are the main futures of PHT system?
a. Impeller – To reduce the water flow.
b. Self-injection Hx – Cools the water in case of leakage.
c. Gland supply – Cools the seals.
d. Primary and secondary seals – sealing the pump.
e. Thrust bearing – To take the axial thrust.
7. What are the purposes of bleed condenser?
The purposes of bleed condenser are,
a. To cool the bleed water, which goes to bleed cooler.
Question and answers Electrical Maintenance Unit
- 146 -
b. To provide cool hot water to the PHT purification system.
Question and answers Electrical Maintenance Unit
- 147 -
8. What is header level control?
For the purpose of maintenance of PHT pipe valves, boiler inlet valve the level of the
coolant should be below the valve to prevent the coolant coming out of the system.
This is called the header level control and achieved by means of manual operation of
valves and shutdown cooling pump.
9. In MAPS Unit # 1 end-shield cooling system has got heaters. Why?
Unit # 1 end-shield is made of nickel steel, which had a nil ductility temperature of
-100°C while commissioning. After 30 years of operation this will rise to +32°C,
because of radiation exposure. To avoid the failure of end shield of MAPS Unit # 1
the temperature of the end-shield should be maintained at 68°C always. MAPS 1
end-shield cooling system is operating at elevated temperature. But in MAPS Unit #2
this problem is not existed because in this unit end-shields are made up of stainless
steel.
Question and answers Electrical Maintenance Unit
- 148 -
Reactor general
1. What are V1 and V2? How they are connected? What is the harm in opening F/M
vault door during reactor operation?
The reactor building is divided into two areas. They are V1 and V2.
V1 – Dry volume area.
V2 – Wet volume area.
V1 area includes F/M vault, boiler room, and entire dome area. Rest of the areas in
the reactor building is V2 area. V1 and V2 are connected by vent shaft through
suppression pool.
F/M vault is a V1 area and F/M maintenance bay is a V2 area. Usually when there is
an accident in F/M vault the pressure is relieved through boiler room through
suppression pool and the uncondensed gases to V2 area. When the reactor is in
operation and if we open the F/M vault door, suppose of there is an accident in F/M
vault the pressure released directly goes to F/M maintenance area, which is a V2
area. Thus pressurizing the entire building.
2. What is the purpose of inlet manifold inside calandria? What is the material used for
that?
The purpose of inlet manifold is to introduce heavy water to the calandria with low
velocity to avoid mixing. That is stratified flow of D2O is obtained b inlet manifold.
Thus the temperature is kept minimum. It is made of zircalloy.
3. Why bi-directional flow is chosen for PHT system?
Bi-directional flow is chosen for PHT system because,
a. Uniform temperature gradient is facilitated so there will be no differential thermal
expansion.
b. It facilitates fuelling even when the reactor is working, which facilitates uniform
neutron flux and this intern gives rise to maximum fuel burns up.
4. What is the purpose of end-shield?
The purposes of end-shield are,
a. To permit access to F/M vault during shut down.
b. To provide tight clamping for fuelling machines.
c. To support the calandria tubes and also system.
Question and answers Electrical Maintenance Unit
- 149 -
Station grounding
1. What is grounding?
It is an electrical connection with the general mass of earth through an earth
electrode.
2. What is difference between earthing and grounding?
Both have same meaning. The term earthing is used in U.K. and grounding in U.S.A.
ground means earth.
3. What are types of grounding?
There are two types
a. System grounding.
b. Equipment grounding.
4. What does mean by system?
Grounding of neutral point of equipment is called system grounding. For instance
grounding of generator neutral, transformer neutral etc.
5. What does mean by equipment grounding?
Grounding of non-current carrying metallic parts is called equipment grounding. For
instance no-current carrying parts include the following:
a. Motor body, switchgear metal enclosure, transformer tank, conduits of wiring etc.
b. Support structures, tower, poles etc. in the neighborhood of electrical circuits.
c. Sheath of cables.
d. Body of portable equipment such as iron, oven, etc.
6. What is the important of system grounding?
It is important because:
a. Earth fault protection is based on the method of neutral earthing.
b. System voltage during earth fault depends on neutral earthing.
c. It is a protection against arcing grounds, unbalanced voltages with respect to earth
and lighting.
7. What is the important of equipment grounding?
Equipment earthing ensures safety.
8. How safety could be ensured by equipment grounding?
In order to enumerate this, let us first find out the effects of current and voltage
developed during fault condition.
Question and answers Electrical Maintenance Unit
- 150 -
9. What is the permissible body current limit?
The magnitude and duration of current conducted through a human body at 50 Hz
should be less than those did that cause ventricular fibrillation.
(Ventricular fibrillation is considered to be the main cause of death due to electrical
shock). These below given data are also applicable for current limits to human body.
Current magnitude Physiological effect Description
1 mA Threshold of
perception
A current at which a person is just able to
detect a slight tingling in his hand or finger
1 – 6 mA Unpleasant to sustain This is often termed as let go currents. Do not
impair the ability of a person holding an
energised object to control his muscles and
release it.
6 – 9 mA Threshold of muscular
contraction.
These are threshold values, since 10.5 mA
current and 16 mA current are the let go values
for women and man respectively.
9 – 25 mA Muscular contraction May be painful and can make it hard or
impossible to release energised objects grasped
by the hand.
25 – 60 mA Muscular contraction Make breathing difficult.
60 – 100 mA Ventricular fibrillation Ventricular fibrillation, stoppage of heart or
inhibition of respiration might occur and cause
injury or death if time is more than 1 sec.
Hence the grounding equipment shock current can be kept below the value sufficient
to cause injury or death by lowering the step and touch potential.
Question and answers Electrical Maintenance Unit
- 151 -
10. How fibrillation current functions?
Fibrillation current is actually function of individual body weight.
For 50 kgs body weight: fibrillation current (IB) = 0.116/ª ts (Limited to 0.03 – 3
sec. Range)
Where ts = duration of current exposure in sec.
Note = Above equation results = 116 mA for 1 sec. and 367 mA for 100 sec.
For 70 kgs body weight: fibrillation current (IB) = 0.157/ª ts
Note = Above equation results = 157 mA for 1 sec. and 496 mA for 100 sec.
Above times are very - very important from the point view of clearing the fault.
Above limit dictates that grounding should e such that current magnitude through
human body should not increase the specified values.
In order to ensure above following have been done.
1. Current conductor have been burried in ground
a. At the depth of 600 mm in switchyard. Depth 600 mm is normally selected
because of freezing or drying out, the Resistivity of upper layers could vary
with seasons, while the Resistivity of lower soil layers remains nearly
constant.
b. Horizontal grid conductors are more effective in reducing the danger of high
step and touch voltages on the earth surface by creating equipotential surface
during fault conditions.
c. At the depth of 800 mm else where. Here depth is kept more because to care
for under grounding services. Example laying of power cables, drainage etc.
2. 25-mm dia copper rod electrodes have been driven in soil.
a. Upto 5 meters depth in 220 kV switchyard.
b. Upto 3 meters elsewhere.
Why only 5 meters and 3 meters depths have been selected is that the
resistance is diminishes rapidly with the first few feet of driving, but less so at
depths greater than 2 to 3 meters in soil of uniform resistivity.
These lengths are adopted in selecting the ground electrodes.
3. 4-inch layer of gravel in 220 kV switchyard has been used. Purpose of using
gravel is by doing steps 1,2 above tough and step potential are computed and
compared with tolerable potential and found as given below.
Potential Computed value Tolerable value
Tough 550 V 665V
Step 2.a switchyard with crushed rock surface 230V 2165 V
Step 2.b elsewhere with natural soil 166V 168.5 V
Question and answers Electrical Maintenance Unit
- 152 -
11. Why grounding is necessary?
The purpose of grounding is to maintain the surface under and around a station ate as
nearly zero potential as possible with reference to absolute earth so that operating
staff who walk in the station yard and tough equipments are ate earth potential and
when faults occur there is safety to staff and equipments.
12. What are the harms of under grounded system?
a. Step and tough potential will increase more than maximum tolerable value.
b. Under single line to ground fault the voltage to earth of the two healthy phases
rises from their normal phase to neutral voltage to full line voltage, which may
result in insulation break down.
c. The capacitive current in two healthy phases increases ª3 times the normal value.
d. The capacitive current in the faulty phase is 3 times its normal value.
e. Experience shows that capacitive current in excess of 4 amps may be sufficient to
maintain an arc in the ionized path of the fault and this persistent arc phenomenon
is called ARCING GROUND, which ultimately cause high voltage build up.
Some time these voltage builds up to 5 to 6 times its normal value, which results
in break down of insulation.
f. Being fault current low, it is difficult to isolate fault.
13. How system grounding and equipment grounding achieved?
System grounding is obtained by grounding the neutral through resistance, through
transformer and through effective or solidly grounding.
Equipment grounding is obtained by Grounding of non-current carrying metallic
parts equipment. For instance no-current carrying parts include the following:
a. Motor body, switchgear metal enclosure, transformer tank, conduits of wiring etc.
b. Support structures, tower, poles etc. in the neighborhood of electrical circuits.
c. Sheath of cables.
d. Body of portable equipment such as iron, oven, etc.
14. What does mean by grounding electrode, grounding system, and grounding
resistance?
Grounding electrode: A conductor driven in the earth and used for collecting ground
current from or dissipating ground current into the earth.
Grounding system: Comprises all interconnected grounding facilities in a specific
area.
Grounding resistance: The resistance offered by the ground when power frequency
current is discharged to the ground through a particular grounding electrode or
grounding system.
Question and answers Electrical Maintenance Unit
- 153 -
15. How grounding resistance could be measured?
There are few methods, which can give approximately true value. These are
described below.
a. Fall of potential method: This method is applicable for small grid or sub station
where induction effect of voltage is less.
b. Measurement of earth resistance by 61.8% distance rule:
c. Alternate – 1 of fall of potential method: This method is influenced by induction
effect.
d. Alternate – 2 of fall of potential method:
16. How value of grounding resistance could be kept constant?
While measuring of grounding resistance is more than computed design value 0.11Ω,
then following are recommended to reduce it. Add in water the following highly
conductive substances and pour into treated pit.
a. Sodium chloride (Nacl), known as common salt.
b. Calcium chloride (Ca CL2)
c. Sodium carbonate (Na2 CO3)
d. Copper sulphate (Cu SO4)
e. Soft choke and
f. Salt and charcoal in suitable proportions.
17. What is the effect of moisture content on earth resistivity?
The moisture content is expressed in percent by weight of dry soil. Dry earth weights
about 1440 kg per cubic meter and thus 10% moisture content is equivalent to 144 kg
of water per cubic meter of dry soil. So about 20% moisture, the resistivity is very
little affected. Below 20%, the resistivity increases very abruptly with the decrease in
moisture.
18. What is the effect of salt content in moisture on resistivity?
The resistivity decreases and the salt content is expressed in percent by weight of the
contained moisture. It will be noted that the curve flattens off at about 5% salt
content and a further increase in salt content gives little decrease in the soil
resistivity.
19. What is the effect of temperature on earth resistivity?
The temperature co-efficient of resistivity for soil is negative, but it is negligible for
temperature above freezing point. Below 0°C the water in the soil begins to freeze
and introduces a tremendous increase in the temperature co-efficient, so that as the
temperature becomes lower the resistivity rises enormously.
20. What does mean by neutral floating or neutral displacement?
Question and answers Electrical Maintenance Unit
- 154 -
When a ground fault occurs, there is a tendency of neutral shift with consequent
change in voltage on the un-faulted phases. This phenomenon is called neutral
floating or neutral displacement.
Question and answers Electrical Maintenance Unit
- 155 -
21. Why grounding of power cable is needed? How it should be done?
a. The magnetic fluxes produced by the three phases in a multi core power cable
almost cancel put each other, since the vector sum of these currents at any instant
is zero and practically there is no residual magnetic flux around the cable.
In case of single core cable, the magnetic flux induces the voltage in the metallic
sheath.
b. When the cable conductor is carrying alternating current, for safe and reliable
operation, the metallic sheath must be grounded. If the metallic sheath is at one
end the potential of the unearthed end could be much above the earth potential. If
both ends are grounded, a circulating current is induced in the metallic sheath.
c. The maximum acceptable induced voltage under normal load current operation is
limited by corrosion and safety considerations.
d. Code of practice of earthing (IS 3043) as well as electricity council London
recommended permissible induced voltage level of 65 Volts.
Hence keeping above all points in mind metallic sheath and armour of all multi core
power cables shall be earthed at both end equipment and switchgear end. Sheath and
armour of single core power cable shall be earthed ate switchgear end only. The
sheaths of shielded control cables should be grounded at both ends to eliminate
induced potentials.
22. In 220 kV switchyard why lightning arrestor should be properly grounded?
a. During lightning, surges should be discharged to ground, otherwise it will
puncture the equipment insulation and it is possible only when lightning arrestor
is grounded properly.
b. In order to make it effective, the ground terminal of lighting arrestor should be
connected direct to the tank of transformer. This will eliminate voltage build up
due to earth resistance. For example for each ohm of earth resistance the voltage
build up for 5000 Amps discharge current is 5 kV. Soil resistivity a should be
minimum and may be it is 3.5 ohm per meter.
23. Why grounding mat is important near ground switch operating handle and
disconnecting switch operating handle?
Equipment operating handles deserve special attention because of the higher
probability for co-incidence of adverse factors. For example,
a. Hand operation equipment such as grounding switches and disconnecting
switches requires the presence of operator near a grounded structure at a point
where opening of an energised circuit can some times result in an arc to the
structure or perhaps mechanical failure and electrical break down of a switch
insulator. A large percentage of fatal accidents from voltage gradients are in fact
associated with operating handles. Hence in order to avoid above problems
following should be an additional safety factors:
Question and answers Electrical Maintenance Unit
- 156 -
1. Use closer mesh in the vicinity of operating handle area (150-mm approx.) and
operating handle shall be directly connected to the earthing mat.
2. Use higher resistance surfacing such as crushed rock or both in order to bring
down the values of touch potential and step potential.
Question and answers Electrical Maintenance Unit
- 157 -
24. Why fences grounding are important?
Because the most dangerous touch contacts involves and outside the fence are
usually accessible to the general public. In order to minimise the effect of step
potential and touch potential following two philosophies could be adopted.
a. Inclusion of the fence within the ground grid area and
b. Placement of fence outside the ground grid area – not safe to use.
With this effective area is increased and reduces ground grid resistance substantially
and maximum ground – grid voltage rise as well. In this case the perimeter conductor
of grid normally either follow the fence line, or parallel to it at a short distance about
0.5 m – 1.5 m outside. In either case, the perimeter ground conductor and fence are
bonded electrically at frequent intervals.
25. What are the specifications for procurement of grounding conductor and grounding
rods?
Grounding conductor, pad, rods etc. should have following specifications:
a. Copper : 91.8 to 94.9%
b. Zinc : 2.0 to 3.0%
c. Tin : 0.8 to 1.5%
d. Lead : 2.0 to 2.5%
e. Iron : 0.5 to 1.0%
Impurities must be limited to the percentage specified below:
a. Nickel : 0.3% maximum.
b. Antimony : 0.3% maximum.
c. Manganese : 0.04% maximum.
d. Phosphorous : 0.04% maximum.
26. Why copper is only preferred as material for grounding?
An advantage of use of copper is in addition to their high conductivity, has the
advantage of being resistant to underground corrosion. Copper is cathodic with
respect to other metals that are likely to be burried in the vicinity.
Disadvantages of use of copper are,
a. Grid of copper forms a galvanic cell with burried steel structures, pipes and any
of the lead based alloys that might be present in cable sheaths, it is likely be
hasten the corrosion of the latter.
b. Use of tinned copper conductor accelerates and concentrates the natural corrosion
of metal in small area however cell potential with respect to steel and zinc
reduces by about 50% and practically eliminates this potential with respect to
lead.
27. What should be the frequency of measurement of earth resistivity?
As per IS: 3043, 1987, measurement of earth resistivity should be carried out
annually or biannually and value should be recorded.
Question and answers Electrical Maintenance Unit
- 158 -
28. What should the statutory provision of earthing?
a. Earthing shall generally be carried out in accordance with the requirement of
India electricity rule 1956, as amended from time to time and the relevant
regulations of the electricity supply authority concerned.
b. All medium voltage equipment shall be earthed by two separate and distinct
connections with earth. In the case of high and extra high voltages, the neutral
points shall be earthed by not less than two separate and distinct connections with
earth, each having its own electrodes at the generating station or substation and
may be earthed at any other point provided no interference is caused by such
earthing. If necessary, the neutral may be earthed through suitable impedance.
c. As for as possible all earth connections shall be visible for inspection.
d. All connections shall be carefully made. If they are poorly made or inadequate for
the purpose for which they are intended, loss of life or serious personal injury
may result.
e. Each earth system shall be so devised that the testing of individual earth electrode
is possible. It is recommended that the value of any earth system resistance shall
be such as to confirm with the degree of shock protection desired.
f. It is recommended that a drawing showing the main earth connection and earth
electrodes be prepared for each installation.
g. No addition to the current carrying system, either temporary or permanent shall
be made which will increase the maximum available earth fault or its duration
until it has been ascertained that the existing arrangement of earth electrodes,
earth bus-bar etc. are capable of carrying the new value of earth fault current
which may be obtained by this addition.
h. No cut-out link or switch other than a linked switch arranged to operate
simultaneously on the earthed or earthed neutral conductor and the live
conductors, shall be inserted on any supply system. This however, does not
include the case of a switch for use in controlling a generator or a transformer or a
link for test purposes.
i. All materials fittings, etc. used in earthing shall conform to Indian standard
specifications, wherever these exist.
29. What maintenance of earth electrodes should be done?
The neighbouring soil to the earth electrode shall be kept moist where necessary, by
periodically pouring water through a pipe where fitted along with it or by pouring
water in the immediate vicinity of the earth electrode.
Periodical visual inspection of all earth electrodes connection wherever available,
shall be carried out to ensure their rigidity and other signs of deterioration.
Question and answers Electrical Maintenance Unit
- 159 -
30. In case new installation is to be done, what basic guidelines should be followed for
grounding?
a. Earthing conductors in outdoor areas shall be burried 500 mm below finished
grade level unless stated otherwise.
b. Minimum 6000 mm spacing between rod pipe electrode shall be provided unless
stipulated otherwise.
c. Earthing conductor around the building shall be burried in earth at a minimum
distance of 1500 mm from the outer boundary of building.
d. Earthing conductors embedded in the concrete floor of the building shall have
approximately 100-mm concrete cover.
e. Earthing conductors along their run on columns, beams, walls etc. shall be
supported by suitable cleats at intervals of 750 mm.
f. Earthing conductors crossing the road shall be either installed in hume pipes or
laid at greater depth to suit the site conditions.
g. Whenever earthing conductors cross underground service ducts, pipes, trenches,
under ground service ducts, pipes, trenches, tunnels, railway track etc. it shall be
laid 800 mm below them.
h. Earthing conductor shall be burried 1000 mm outside the switchyard fence. Every
alternate post of the fence and gates shall be connected to earthing loop by one
lead.
i. Each earthing lead from the neutral of the power transformer shall be directly
connected to a rod or pipe or plate electrode treated earth pit, which in turn shall
be connected to station earthing.
31. How much resistance human body has?
Resistance of internal body tissues (Not including skin) : 300 Ω.
Resistance of body including skin : 500 to 3000 Ω.
32. What is the effect of voltage frequency and current on resistance of the human body?
a. For touch voltages upto approximately 50V the value of impedance of the skin
varies widely with surface area of contact, temperature, respiration etc. even for
one person.
b. For higher touch voltages in order of approximately 50V to 100V the skin
impedance decreases considerably and becomes negligible when the skin breaks
down.
c. Wet hand contact resistance becomes very low at any voltage.
d. With increase in frequency, impedance of skin decreases.
Question and answers Electrical Maintenance Unit
- 160 -
33. What are the paths of current through the body?
A value of 1000 Ω is selected for the calculations that follows as representing the
resistance of a human body from hand to both feet and also from hand to hand or
from one foot to other foot.
Above paths includes vital organs such as heart.
a. Path from hand to foot is much more dangerous than foot to foot, since current
flow through heart during foot to foot current flow will be much less than the
current flow from hand to foot approximate ratio is 25:1
b. However deaths have occurred during foot to foot current flow. Hence can not be
ignored.
34. What are the effects of re-closure shock?
During re-closure, when fault is persisting a person might be subjected to the first
shock which would not permanently injure him, but would upset and disturb him
temporarily.
Next, a single fast automatic re-closure could in a second shock initiated within less
than 500 ms from the start of first. It is this second shock, occurring after a relatively
short interval of time before the person has recovered, that might cause a serious
accident. With manual re-closure the possibility of exposure to a second shock is
reduced since the time interval may be substantially greater.
35. State DC/AC equivalent factor (K).
Ratio of direct current (DC) to its equivalent rms value of alternating current (AC)
having the same probability of inducting ventricular fibrillation.
K = I DC fibrillation / I AC fibrillation (rms).
K = 3000 mA / 100 mA
K = 30 mA
Threshold of let-go is unlike AC there is no definable threshold of let-go for DC for
current magnitude below approximately 300 mA. Only the making and breaking of
current leads to painful and cramp like contractions of muscles.
Above approximately 300 mA, let-go may be impossible or only possible after
several seconds or minutes of shock duration. Below approximately 300 mA a
sensation of warmth is felt in the extremities during the flow of current. Above 300
mA unconsciousness frequently occurs.
36. Why AC is more dangerous than DC?
Because the excitatory action of current (stimulation of nerves and muscle, induction
of cardiac atrial or ventricular fibrillation) are linked to the changes of current
magnitude especially when making and breaking of the current. To produce the same
excitatory effects the magnitude of direct current flow of constant strength in 2 to 4
times greater than that of alternating current.
Question and answers Electrical Maintenance Unit
- 161 -
Transformer oil tests
1. What are the characteristics of transformer oil?
Characteristics Requirement Method of testing Remarks
Appearance The oil shall be clear
and transparent and
free from suspended
matter of sediments
A representative sample
of the oil shall be
examined in a 100-mm
thick layer at 27°C.
Density at 29.5°C
max.
0.89 gm / cm3 IS-1448(P:16):1977 See note 1
Kinematic viscosity
max. at
a. 27°C
b. 40°C
27 cSt
under consideration
IS-1448(P:25):1976
Interfacial tension at
27°C minimum
0.04 N/m IS- 6104:1971
Flash point penskymarten
(closed)
minimum
140°C IS-1448(P:21):1970
Pour point max. -6°C IS-1448(P:10):1970
Neutralization value
a. Total acidity max
b. Inorganic
acidity/alkalinity
0.03 mg KOH/g
nil
IS-1448(P:2):1967
IS-1448(P:2):1967
Alcoholic
potassium
hydroxide
solution of
0.02 N
should be
in place of
0.1 N
indicated
in test
method
Corrosive sulphur Non-corrosive
Electric strength
(Breakdown voltage)
a. New unfiltered
oil minimum.
b. After filtration
minimum
30 kV (rms)
If the above value is
not attained the oil
shall be filtered 60 kV.
IS-6792:1972
See note 2
Dielectric dissipation
factor (tan δ) at 90°C
max.
0.002 IS-6262:1971 See note 2
Question and answers Electrical Maintenance Unit
- 162 -
Specific resistance
(resistivity)
a. At 90°C min.
b. At 27°C min.
35 * 1012 Ω-cm
1500* 1012 Ω-cm
IS-6103:1971 See note 2
Oxidation stability
a. Neutralization
value after
oxidation max.
b. Total sludge,
after oxidation
max.
0.4 mg KOH/g
0.1% by weight.
Ageing
characteristics after
accelerated ageing
(open beaker method
with copper catalyst)
a. Specific resistance
at 27°C minimum &
at 90°C minimum.
b. Tan δ at 90°C
max.
c. Total acidity max
d. Total sludge max.
2.5 * 1012Ω-cm
0.2 * 1012Ω-cm
0.20
0.05 mg KOH/g
0.05% by weight.
IS-12177:1987
IS-6103:1971
IS-6262:1971
IS-1448(P:2):1967
IS-12177
Presence oxidation
inhibitor
The oil shall contain
antioxidant additives
IS-13631:1992 See note 3
Water content max. 50 ppm IS-13567:1992
SK value Under consideration
Notes:
1. Density of the oil may be measured at ambient temperature and converted to 29.5°C
using the following equation.
29.5ρ = ρt {1+X (t-29.5)}
Where t = Ambient temperature (in °C)
ρt = Density measured at temperature t
X = Correction factor (Equal to 65 * 10-5).
2. As a consequence of the tendency for water absorption to occur due to breathing on
storage even when drums are sealed the oil shall be filtered to remove moisture and
particulate contaminates present in the original sample before the test as follows.
a. A sufficient quantity of oil is heated to 90 ± 2°C, then filtered hot under vacuum
corresponding to an absolute pressure of about 2.5 kPa through a sintered glass
filter of porosity grade 4’.
Question and answers Electrical Maintenance Unit
- 163 -
b. A portion of filtered is cooled in a desiccator and used immediately to measure
electric strength, if required, and specific resistance at 27°C. The remaining hot
filtrate is immediately used for measuring dielectric dissipation factor at 90°C and
specific resistance at 90°C.
3. For both phenol and amine types of indicators, qualitative methods shall be adopted.
In case of ambiguity (marginal cases) in finding the intensity of colour, a quantitative
method shall be adopted. Value of 0.5 (max.) shall be treated as absence of DBPCPhenolic
type inhibitor (quantitative method for amine is under consideration).
Question and answers Electrical Maintenance Unit
- 164 -
2. What are the permissible limits for the transformer oil?
Test
required
Equipment
voltage
Permissible
limits
Importance
Electric
strength
(breakdown
voltage)
min.
Above 145 kV
145 – 72.5 kV
50 kV
40 kV
30 kV
The electric strength does not give a
true indication of the deteriorated
condition of the oil. An oil which is
significantly oxidised under high
temperature may show a high dielectric
strength in the absence of moisture. The
presence of oil deterioration particles,
water and foreign contaminants results
in general overall reduction in the
efficiency of the equipment. A normal
method of oil filteration and
dehydration only maintain the electric
strength but does not improve the
deteriorated oil. It is therefore not
advisable to rely solely on the electric
strength of the oil by periodic tests
without verifying its other
characteristics.
Water
content
(max.)
Above 145 kV
Below 145 kV
25 PPM
35 PPM
The presence of water in oils is harmful
as it lowers the electric strength and
resistivity. And it reacts with solid
insulating materials particularly paper.
Dielectric
dissipation
factor (Tan
δ delta) at
90°C max.
Above 145 kV
Below 145 kV
0.2 max.
1.0 max.
This characteristic is very sensitive to
the presence in the oil of soluble
contaminants and ageing products. This
test is therefore of special interest. If tan
delta increases resistivity decreases.
This is highly influenced by
temperature, voltage, and frequency of
the equipment.
Resistivity
(min) 90°C
All voltages 0.1 * 1012
Ω - cm.
The specific resistance is another
important test for the quality of oil.
High resistivity reflect low contents of
free ions and ion forming particles and
normally indicates low concentration of
conducting contaminants. Water
contents and cold precipitable materials
can reduce the resistivity.
Neutralizati All voltages 0.5 mg The acid products formed by the
Question and answers Electrical Maintenance Unit
- 165 -
-on value
(max.)
KOH/g oxidation of the oil activity encourage
deterioration of insulating paper and
pressboard. It is therefore essential to
detect and monitor this process. The test
is required to be performed more
frequently if value exceeds 0.3 mg
KOH/g.
Sediment
and
precipitable
sludge
All voltages No
sediments
of sludge
should be
detectable
The presence of those particle normally
reduces the electric strength of the oil
and in addition deposits hinder heat
exchange, thus encouraging from the
deterioration of the insulating material.
Flash point All voltages 125°C The test is for finding lower
hydrocarbons which formed due to
some incipient fault in the equipment
such as electrical discharge, excessively
high internal temperature core fault etc.
this test should be made more
frequently if the oil has been subjected
to high temperature or shows any sign
of unusual odour.
Interfacial
tension at
27°C (min.)
All voltages 0.018 N/m The interfacial value of oil against
water provided a very sensitive means
of determining the degree of oil
contamination. We can measure the
concentration. A low interfacial value
indicates that the oil is damaged.
Dissolved
gases
(max.) PPM
All voltages IS :10593
1983
Under normal service conditions only
small amount of CO, CO2 and very
small quantity of H2 and hydrocarbons
are found. Large amount of these gases
is an indication of an incipient due to
overheating, sparking, hotspot, arcing,
selector breaking current, solid
insulation deterioration etc.
Knowledge of the effect of such faults
in operation and safety of the power
apparatus is of great importance, as
transformers are required to opesrate
over a long period of time.
To obtain such information and rectify
the faults at regular intervals (using
Question and answers Electrical Maintenance Unit
- 166 -
dissolved gas analysis method) ensures
trouble free operation and safety of
equipment.
Question and answers Electrical Maintenance Unit
- 167 -
Recommended or permissible values for 220 kV switchyard.
1. Rated voltage of equipment = 220 (Nominal system voltage) * 1.1
= 245 kV
2. Permissible duration of short circuit in network 220 kV nominal voltage = 180 ms.
3. Permissible over voltage factors for 220 kV nominal voltage system
a. = 220 * 6.5
3
= 825 kV (Approx.)
b. Power frequency flash over (wet) voltage
= 220 * 3.0
3
= 380 kV (Approx.)
4. Cable charging breaking current requirement:-
The CB for opening high voltage cable or cable networks should be capable of
interrupting the charging currents of cables successfully with the over voltage within
specified limits. The recommended value of rated cable charging breaking current
for 220 kV (Nominal voltage) is 250 A.
5. Impulse and power frequency with stand levels for various system voltages
(Applicable at 20°C 760 mm of Hg pressure and 11-g/m3 humidity).
Impulse withstand kV
crest
One minute power
frequency test voltage kV
(rms)
Nominal
system
voltage
(L-L) kV
(rms)
Highest
Rated voltage
(L-L) kV
(rms) Full
insulation
(kV)
Reduced
insulation
(kV)
Full
insulation
(kV)
Reduced
insulation
(kV)
220 245 1050 900 460 395
Note: Reduced insulation value – applies where internal insulation is mire important.
Full insulation value – applies where external insulation is more important.
6. Standard clearances:-
For rated nominal system voltages of the order of 220 kV
Minimum clearance to earth = 117.8 cms.
Minimum clearance between phase in air = 205.8 cms.
Note: clearances indicated above are applicable for effectively earthed system.
7. Duty cycle for 220 kV ABCB:
Question and answers Electrical Maintenance Unit
- 168 -
0 – 3” – CO – 3” – CO.
Question and answers Electrical Maintenance Unit
- 169 -
8. Operating time for 220 kV breaker:
Opening time - 19 to 23 m sec.
Closing time - 45 to 54 m sec.
Blast time - 26 to 40 m sec.
9. mV drop across the arc chambers:
Acceptance limit – 35 mV.
10. 220 kV isolators:
a. mV drop test for the main contact – 11 mV for 1250 A isolators.
7.5 mV for 2000 A isolators.
b. Interrupting capacity of magnetising current – 0.8 A at 0.15 PF (lag)
c. Interrupting capacity for line charging current – can interrupt charging currents of
bus bars and cables of upto 20 – 220 kV bays.
11. 220 kV transformers:
Arcing horns settings for 220 kV transformer having BIL = 900 kV should be 1200
mm.
Question and answers Electrical Maintenance Unit
- 170 -
Electrical or electronic equipment design factors
1. Explosion protection
A source of energy along with the concentration of the following factors in the
atmosphere is all that required to trigger off an Explosion in hazardous locations.
a. Flammable substances such as gas, vapour, mist and dust.
b. Air / Oxygen present in the atmosphere.
c. Ignition level.
The factors leading to explosion also depends upon the inherent properties of gas and
its concentration in the atmosphere.
Developing and designing of electrical or electronic products for explosion
protection is very much vital for safety purpose of human life as well as for plant
sites. For design and selection of an equipment for hazardous area, it is very much
essential to know the parameters or characteristics of the atmosphere. Measures have
to be taken to prevent formation of explosive atmosphere and restricting the
explosion to a safe level. Those hazardous locations are classified in to zones and
areas as per NEC and IEC classifications.
Types of protection.
Areas where explosive atmospheres can occur despite the explosion protection
measures employed, only explosion protected electrical equipment may be used.
Explosion protected electrical equipment can be manufactured to following
protection type levels.
Protection
type
Basic principal Principal application
Flame –
proof
enclosure d
Part which can ignite an explosive
atmosphere are placed in an enclosure
which, if there is an ignition of an
explosive mixture internally, will
withstand the pressure and prevent the
explosion being transmitted to the
atmosphere around the enclosure.
Switchgear and switching
installations, control and
display units, control
boards, motors,
transformers, heating
devices, light fittings.
Increased
safety e
Additional measures are taken to
achieve a higher level of safety and
avoid the risk of impermissibly high
temperature and the occurrence of
electrical equipment, which in normal
use produce neither sparks arcs or
dangerous temperature.
Terminal and connected
boxes, control boxes for
the installation of
excomponents (which are
protected in another
protection call), squirrel
cage motors, light fittings.
Pressurised
apparatus p
The formation of an explosive
atmosphere inside an enclosure is
prevented by using a protective gas to
maintain an internal overpressure
Switching and control
cabinets, analysis devices,
large motors.
Question and answers Electrical Maintenance Unit
- 171 -
relative to the surrounding atmosphere,
and if necessary, the interior of the
enclosure is permanently supplied with
protective gas so that there is dilution of
flammable mixtures.
Intrinsic
safety i
The equipment placed in the hazardous
are contains only intrinsically safe
circuits. A circuit is intrinsically safe if
no sparks or thermal effects occur under
established test conditions (including
the normal operating and certain fault
conditions), which could lead to the
ignition of a given explosive
atmosphere.
Measurement and control
equipment,
communications
equipments, sensors,
actuators.
Oil
immersion
(o)
Electrical equipment or parts of
electrical equipment are immersed in a
protective liquid in such a way that an
explosive atmosphere above the surface
or outside the enclosure cannot be
ignited.
Transformers, starting
resistors.
Powder
filling q
Type of protection by which the
equipment parts that could become and
ignition source are fixed in position and
completely surrounded by finely ground
solids, so as to prevent ignition of an
external explosive atmosphere.
Electronic devices
Moulding m Parts, which can ignite an explosive
atmosphere, are embedded in a casing
compound so that the explosive
atmosphere cannot be ignited.
Switchgear for low
powers, control gear and
indicating equipment,
display equipments,
sensors.
Question and answers Electrical Maintenance Unit
- 172 -
2. Index of protection (IP)
IP (index of protection) for enclosures of electrical equipment as per IS: 13947
(Part-1): 1993 are as following.
Protection against solids Protection against liquids Mechanical protection
IP Principal IP Principal IP Principal
0 No protection. 0 No protection. 0 No protection
1 Protected against solid
bodies larger than 50
mm (eg:- accidental
contact with the hand).
1 Protected against
vertically falling
drops of water
(condensation).
1 Impact energy 0.225
joule.
2 Protected against solid
bodies larger than 12
mm (eg:- finger of the
hand).
2 Protected against
drops of water
falling at upto 15°
from the vertical.
2 Impact energy 0.375
joule.
3 Protected against solid
bodies larger than 2.5
mm (eg:- tools, wires).
3 Protected against
drops of rain water
at upto 60° from the
vertical.
3 Impact energy 0.500
joule.
4 Protected against solid
bodies larger than 1
mm (fine tools and
small wires).
4 Protected against
projections of water
from all directions.
5 Impact energy 2.00
joule.
5 Protected against dust
(no harmful deposit).
5 Protected against jets
of water from all
directions.
7 Impact energy 6.00
joule.
6 Completely protected
against dust.
6 Protected against jets
of water of similar
force to heavy seas.
9 Impact energy 20.00
joule.
7 Protected against the
effects of immersion.
8 Protected against
prolonged effects of
immersion under pressure.
Question and answers Electrical Maintenance Unit
- 173 -
Question and answers Electrical Maintenance Unit
- 174 -
Thyristor engineering
Introduction
Thyristor is the name of a large family of semiconductor devices, which includes the
following.
a. Silicon controlled rectifier (SCR).
b. Triac.
c. Diac.
d. Silicon controlled switch (SCS).
e. Light activated switch (LAS) etc.
But in general the silicon controlled rectifier is referred to as thyristor. This device finds
extensive applications in industrial equipments such as rectifiers, inverters, choppers
etc. In our station thyristors are used in the following equipments.
a. Main generator static excitation system.
b. Power UPS.
c. Control UPS.
d. Diesel generator excitation system and etc.
Construction of thyristor
The thyristor is a four-layer P-N-P-N semiconductor device. The biasing at the three
junctions J1, J2, J3 determine the state of the thyristor. Ohmic connections are made to
the P, P, N regions and these terminals thus formed are called Anode, Gate, and
Cathode respectively. This is shown in the figure below.
J1 J2 J3
A C
A P N P N C
G
G
Difference between diode and thyristor
Diode is an uncontrolled rectifier device whereas a thyristor is a controlled rectifier
device. The condition for the conduction of a diode is that the anode must be positive
with respect to the cathode. In case of a thyristor in addition to the above condition a
positive gate pulse should also be applied to the gate terminal. By controlling the instant
of the pulse release the conduction of the thyristor can be controlled.
A C
AC input DC output
Question and answers Electrical Maintenance Unit
- 175 -
V – I characteristics of thyristor
The thyristor characteristics are divided into four regions of operation. They are as
follows.
a. Forward blocking region.
b. Forward conduction region (Useful region of operation).
c. Reverse blocking region.
d. Reverse conduction or breakdown region.
a. Forward blocking region: When an external voltage is applied to the thyristor
making anode positive with respect to the cathode, the thyristor is said to be ‘forward
biased’. In this conditions
1. Junctions J1 & J3 are forward biased.
2. Junction J2 is reverse biased.
3. A small forward leakage current flows which increases with the applied voltage.
The thyristor is in the ‘off state’ since the voltage applied is less than the break over
voltage of the device. This is represented by region OA in the characteristic graph.
b. Forward conduction region: As the forward voltage is increased, a point is reached
where the junction J2 gets forward biased and allows a large current to flow through
the device. This voltage is known as the ‘forward break over voltage’. Above this
point the voltage across the device falls to a low value and the current is limited only
by the external load resistance. This is represented ‘purpose of gate triggering’.
As seen above thyristors can conduct even in the absence of gate pulses provided the
forward voltage across them is more than the break over voltage. The application of
the positive gate pulse reduces the break over voltage and the thyristor starts
conducting at a much lower forward voltage. This characteristics of the thyristor
makes it possible to control its conducting period in each cycle of the applied voltage
by the release of gate pulses at the desired instant. The firing circuit or the pulse
generator generates the firing pulses, the position (with reference to the voltage
across the thyristor) of which depends on the DC voltage signal given to it by the
controller (voltage, current regulator). This is shown in the diagram given below.
AC Input
Synchronizing Voltage
Thyristor
V ref
Controller Pulse Gen. Pulse
V feed back (AVR) (Firing ckt) amplifier
Question and answers Electrical Maintenance Unit
- 176 -
Question and answers Electrical Maintenance Unit
- 177 -
c. Reverse blocking region: When a reverse voltage is applied across the thyristor in
such a way that the anode is at a negative potential with respect to the cathode the
thyristor is said to be ‘reversed biased’. Under this condition,
1. Junctions J1 and J3 are reversed biased.
2. Junction J2 is forward biased.
Only a small leakage current flows through the device, which increases with the
applied voltage. This is indicated by region OD in the characteristics.
d. Reverse conduction region: When the reverse voltage across the thyristor is
increased a point is reached when the junctions J1 and J3 breakdown causing heavy
current to flow through the device. The voltage at this point is known as the ‘reverse
breakdown voltage’. This is indicated by region DE in the characteristics.
Current C
Forward conduction region
IL
IH
A
B IG1 IG=0
O
D VBO Voltage
Reverse blocking
region Forward blocking region
Reverse conduction
region
IL – latching current.
IH – holding current.
VBO – break over voltage.
IG – gate current.
Question and answers Electrical Maintenance Unit
- 178 -
Some important technical terms
a. Latching current: It is the minimum ON state current required to keep the thyristor in
the ON state after the triggering pulse has been removed. In control and power
ACVR’s this has been achieved by bleeder or dummy load resistances connected
across the output terminals (DC side).
b. Holding current: It is the value of anode current below, which the thyristor in
conduction (ON state) turns OFF. Thus holding current is ON state to OFF state
current where as latching current is OFF state to ON state current.
c. Firing angle: The instant at which the gate pulse is released expressed in electrical
degrees with reference to the applied voltage across the thyristor is known as ‘firing
angle’. For rectifier mode of operation the firing angle will be between 0° to 90°.
Greater the firing angle lesser will be the output voltage of the rectifier. This is
illustrated in the figure given below.
Firing angle 30° Firing angle 70°
0° 180° 360° 0° 180° 360°
30° 70°
VDC VDC
V VDC V VDC
d. Triggering: The process of switching the thyristor ON by the application of the gate
pulse is known as triggering.
e. Ripple: The AC components in the DC output of any rectifier are called the ripple. In
control and power ACVR’s on no load the ripple voltage is about 80 V AC at a DC
output voltage of 260 V. This AC voltage indicates the conduction of all the
thyristors in the bridge. For example the ripple voltage of ACVR’s rise to about 140
V AC if one thyristor of the bridge does not conduct.
f. Filter: Filters are used to remove the ripple components from the output of any
rectifier so that it does not reach the load circuit. Inductors and capacitors are used as
filters in the output of rectifiers.
Question and answers Electrical Maintenance Unit
- 179 -
Question and answers Electrical Maintenance Unit
- 180 -
Protection of thyristors
The thyristor is a very sensitive semiconductor device and it needs to be protected for
the following abnormal conditions while in service.
a. High dv/dt.
b. High di/dt
c. Short circuit / over current.
High dv/dt: This indicates the rate of rise of anode voltage. This rating specified for a
particular thyristor should not be exceeded because it would lead to spurious triggering
(switching ON) of the thyristor. The ‘snubber circuit’ (a resistance and a capacitance in
series) connected across the thyristor as shown below provides the protection against
high dv/dt.
R C
Thyristor
High di/dt: This rating of the thyristor indicates the maximum rate of rise of ON-state
current. When a thyristor is turned ON conduction starts at one or more places near the
gate. Small area of conduction then spreads from these points to the whole crystal.
Sudden rise of current causes ‘hot spots’ in the junctions and subsequent failure of the
device due to melting. Connecting an inductor in series with the thyristor shown below
provides protection against high di/dt.
R C
L
Thyristor
Short circuit protection: A semi conductor fuse in series with the thyristor provides
protection against short circuits. The semi conductor fuses operate very fast with prearcing
time less than 0.5 m-sec and arcing time of about 3 m-sec. Hence the fault
current will be interrupted by these fuses before it reaches its maximum value.
R C Isc
L S.C. Fuse
Thyristor
Arcing time
Clearing time
Melting time
Semi conductor fuse characteristics
Question and answers Electrical Maintenance Unit
- 181 -
Testing of thyristor
1. Resistance checks: The anode – cathode resistance and gate – cathode resistance of
the thyristor should be as follows.
Anode – cathode resistance for power thyristors
In the forward direction – about 1 MΩ.
In the reverse direction – about 1 MΩ.
Gate – cathode resistance about 25Ω in both the directions.
In case of fused thyristor these resistances will be zero Ω.
2. Current deflection test: The thyristor should be connected to a power supply as
shown below.
A K Ammeter
G
R Switch
Power supply
The moment the switch is closed the thyristor conducts and the ammeter reads the
current. If there is no deflection in the meter it shows that the thyristor is faulty. This
is a foolproof method for testing any thyristor. The above testing can also be done
with the help of a motwane analog multimeter. The arrangement for the same is as
follows.
A K
G
(+)
Ammeter
Switch
(–)
Motwane ammeter selected in resistance range.
Switch open high resistance.
Switch closed zero resistance.
Question and answers Electrical Maintenance Unit
- 182 -
Question and answers Electrical Maintenance Unit
- 183 -
Miscellaneous (Tests on power cables)
1. What are precautions to be taken while doing maintenance or repair work on power
cables?
A research organised by EPRI (electric power research institute) on medium voltage
XLPE cables found that DC high potential at 80% of the factory value
a. Subsequently reduces the life of the cable and
b. It did not identify significantly weakened cable.
Based on above research recommended maintenance proof test voltage = 60% of the
factory test voltage.
Maintenance and repair:
Before attempting for any corrective maintenance on power cables like replacement
of lugs or jointing of cables following should be taken care
a. IR value should be good and it should be comparable to the previous values.
b. The quality of joints should be such that it dies not add any resistance to the
circuit. Before jointing is commenced it is advisable that IR of both sections of
cable to be jointed be checked.
c. Before jointing a paper insulating cable (for PVC cables this step is not required),
the paper insulation should be tested for the presence of moisture by immersion in
hot compound for paraffin wax at a temperature between 120°C and 140°C. the
presence of moisture indicated by the formation of bubbles when a piece of the
paper is immersed in hot compound. Use only single strip of the paper.
d. In case dia of die to be used for crimping is slightly more than dia of cables, then
use some loose strand before doing crimping of lug. While crimping it should be
ensured that homogeneity of cramped conductor strands is achieved otherwise it
will add resistance and create over heating.
2. What are the tests to be carried out during DC high voltage test on power cables?
DC high voltage testing.
During DC high voltage testing flow of following currents will take place.
a. Capacitance charging current.
b. Dielectric absorption current.
c. Surface leakage current.
d. Partial discharge current (corona).
e. Volumetric leakage current.
a. Capacitance charging current.
The capacitance charging current is high as the DC high potential is applied and can
be calculated by the formula
ig = E – t where ig – capacitance charging current.
rc / R E – voltage in kilovolts.
r – resistance in mega ohms.
c – capacitance in micro farads.
Question and answers Electrical Maintenance Unit
- 184 -
t – time in seconds.
The charging current is a function of time and will decrease as the time of the
application of voltage increases. It is the initial charging current when voltage is
applied and therefore not of any value for test evaluation. Test readings should be
taken until this current has decreased to a sufficiently low value.
Question and answers Electrical Maintenance Unit
- 185 -
b. Dielectric absorption current.
The Dielectric absorption current is also high as the test voltage is applied and
decreases as the voltage applicable time increases. This current can be calculated by
the formula
ia =VCDT-n
Where ia – dielectric absorption current.
V – test voltage in kilovolts.
C – capacitance in micro farads.
D – proportionately constant.
T – time in seconds.
n – constant.
Again time should be allowed before recording test readings so that this current has
decreased sufficiently.
c. Surface leakage.
The surface leakage current is due to the conduction on the surface of the insulation
and not desired in test results and should therefore be eliminated by carefully
cleaning the surface.
d. Partial discharge current.
The partial discharge current, also known as corona current is caused b ionization of
air due to high-test voltage. This current is not desirable and same is normally
controlled by providing semi-conducting tape to separate the conductor from
insulation.
Semi-conducting tape is used to separate the conductor from the insulation to prevent
possible damage of the insulation from the corona and ionization. The voltage may
develop between stranded conductor and insulation, thereby causing the ionization of
air and breakdown of cable insulation. The application of semi-conducting smoothes
the voltage stress and keeps such voltage stress constant and to a minimum.
e. Volumetric leakage current.
The volumetric leakage current flows through the insulation volume itself. This is the
current that is used to evaluate the condition of the insulation under test. Sufficient
time should be allowed for the volumetric current to stabilize before test readings are
recorded.
Question and answers Electrical Maintenance Unit
- 186 -
Predictive (preventive) maintenance on Induction Motor.
1. What are the reasons for high current in motor?
a. High frequency – at 51 Hz current will be 105% of the normal current.
b. Low frequency – at 47.8 Hz current will be 102% of the normal current.
c. High voltage.
d. Under voltage.
e. Mechanical over loading.
f. Process requirement.
2. What are the reasons for unbalanced current in motor?
a. Loose power cable connection.
b. Voltage unbalance.
c. Short-circuited turns of coils of winding.
3. What are the reasons for vibration in the motor?
Vibration could be because of mechanical faults and electrical faults.
1. Mechanical faults.
a. Wrong alignment of the motor on foundation.
b. Wrong installation.
c. Improper fitting of bearing and cooling fans.
d. Periodic impulse loads such as reciprocating compressors.
e. Pulley of heavy weight which cause bending of motor shaft resulting in non
uniform air gap.
f. Damage of bearing or bad bearing.
g. Bad coupling.
h. If the axial alignment of the motor and the driven machine is incorrect and
rotor is allowed to contact its axial stops, high axial vibrations may occur,
together with high bearing temperature high and even bearing failure.
i. Machine base and foundation problem.
j. Under sized bearing.
Question and answers Electrical Maintenance Unit
- 187 -
2. Electrical faults.
a. Air gas dissymetry.
b. Broken rotor bars.
c. Slackened stator core.
d. Slackened rotor core.
e. Interturn short in the rotor winding in the two-pole machine.
f. Unbalance in rotor winding.
g. Unbalance power supply voltages.
If the vibration is because of electrical fault, de-energise the machine and
watch the vibration as it runs down.
The possible vibration frequencies observed are
a. Twice the power supply frequency – it indicates that the vibration is developed
by unbalanced power supply voltages, unbalanced air gap, unbalance in rotor
winding, slackened stator core etc.
b. Multiple of power frequency – the stator and rotor slots co-ordinate to develop
radial lines of force to deform and pulsate the cores.
c. Twice the slip frequency – magnetic unbalance due to unbalance air gaps,
slackened rotor core, interturn short in the rotor-winding etc. of two-pole
machine.
d. Beat (Humming) – in case of two-pole machine the beat is developed when
the vibration of twice as much as power frequency developed between the
stator and rotor is superimposed on the vibration of twice the slip frequency
developed due to irregular air gap.
4. What are the reasons for winding temperature high in the motor?
For motors having class – B insulation the temperature should not be more than
110°C and for motors having class – F insulation the temperature should not be more
than 130°C. In case temperature is more, then the following could be the possible
reasons.
1. Electrical overloads.
a. Over and under voltage.
b. Over and under frequency.
c. Voltage unbalance. Voltage unbalance create unbalance of currents and
increase in temperature which will be 2*(% voltage unbalance)* (% voltage
unbalance)*.
(% Voltage unbalance) = 100 * maximum deviation from average voltage
average voltage.
For instance if voltages are 390V, 410V & 440V,
% Voltage variation = 100*(440-390+410+440) (440-390+410+440) = 6.45%.
3 3
Therefore increase in temperature rise = 2*(6.45)*(6.45) = 83°C (approximately).
d. Voltage transients and interruptions.
Question and answers Electrical Maintenance Unit
- 188 -
e. Loose connection at motor terminals.
f. Unbalance current.
g. Single phasing (if OLR protection is not working).
h. Long acceleration cycle.
i. Unusual system grounding conditions.
Question and answers Electrical Maintenance Unit
- 189 -
2. Mechanical overloads.
a. Locked rotor.
b. Heavy starting.
c. Bearing problem.
d. Overload in continuous duty and intermittent duty.
3. Environmental overloads.
a. Excessive temperature of cooling medium or ambient temperature.
b. Restricted flow of cooling.
c. Reduction in the density of cooling medium.
d. Heat transfer from machine parts connected to the motor.
4. Others.
a. Excessive number of switching operations.
5. What are the reasons for bearing temperature high?
Temperature of bearing should not be more than 90°C. In case temperature is higher
than the 90°C the following could be the possible reasons.
a. Inadequate lubricants inside the bearing.
b. Faulty bearing.
c. Bearing is jammed.
d. Over greasing.
e. Improper grade of lubricant.
6. What are the reasons for abnormal sound or noise?
Motors in general should run very quietly and no abnormal noise is desired.
However if noise is there, it could be because of following reasons.
a. Windage noise – the noise due to ventilating system, (whistling noise).
b. Bearing noise – the noise due to its rolling contact.
c. Unusual noise – some defects inside the motor (example – motor bar failure).
d. Deep heavy growling noises – some electrical fault.
For permissible limits of noise levels for rotating electrical machines IS: 12065:1987
is being reffered.
7. What are the reasons for harmonics in the motor?
Generally even harmonics are not expected to be present in three phase motors.
Triple-n harmonics like 3rd, 9th, 15th etc. are also not expected. The dominant odd
harmonics expected are 5th, 7th, 11th and 13th etc.
Presence of strong 2nd harmonics indicates unbalance voltage, unbalance winding
impedance, rotor defects, magnetic imbalance, faulty rotor skewing etc.
Very strong 3rd harmonics indicates magnetic saturation, ground leak currents,
overloads etc. Overloading causes overheating, resulting in non-linear magnetization
Question and answers Electrical Maintenance Unit
- 190 -
which gives high 3rd harmonic winding faults, short circuits. Hot spots in rotor or
stator also may indicate higher harmonics.
Question and answers Electrical Maintenance Unit
- 191 -
8. What are the possible reasons for not coming of rated speed during start?
In case motor does not come to its rated speed then following could be the probable
causes.
a. Starting load is too high.
b. Broken rotor bars (look for cracks near rings).
c. Open primary circuit.
d. Voltage is too low.
9. What are the possible reasons for motor to take long acceleration time?
Following may the possible reasons for motor to take long acceleration time.
a. Excess loading.
b. May be rewound motor with poor quality of winding conductor having high
resistance.
c. Defective squirrel cage rotor.
d. Applied voltage is too low.
10. What are the points contributes in insulation resistance of the motor?
If the measured insulation resistance of the motor is less than 1 MΩ / kV with a
minimum of 1MΩ, when the machine is cold it is to be dried out before full voltage
is applied to the terminals of the motors and the drying out is to be continued as long
as the insulation resistance rises or until a sufficiently high value that is not less than
1 MΩ / kV with minimum of I MΩ at 75°C is reached.
While proceeding for point as above said, following factors are to be kept in mind
which affect the insulation resistance measurement. They are,
a. Surface condition.
b. Moisture.
c. Temperature.
d. Magnitude of test voltage.
e. Duration of application of test voltage.
f. Residual charge in the winding.
g. Ageing of the insulation.
h. Mechanical stresses.
11. What are the minimum recommended PI values for AC and DC rotating machines?
Following minimum recommended PI values criteria is to be followed.
a. 1.5 for class – A insulation.
b. 2.0 for class – B insulation.
c. 2.5 for class – F insulation.
Question and answers Electrical Maintenance Unit
- 192 -
12. What is the minimum recommended absorption coefficient value for AC and DC
rotating machines?
Absorption coefficient = IR value for 60 seconds = 1.3 (minimum recommended value)
IR value for 15 seconds
Tips:
a. IR value decreases some what with an increase I applied voltage. However for
machines in good condition substantially the same IR is obtained for any test
voltage up to the peak value of the rated operating voltage.
b. If the IR value decreases significantly with an increase in applied voltage it is an
indication of imperfections or fractures of the insulation aggravated by the
presence of dirt or moisture or may be due to the effects of dirt or moisture alone,
or may result from numerous other phenomena not necessarily associated with
any defect or weakness.
c. IR value for good dry winding continue to increase for hours with constant test
voltage continuously applied, however a fairly steady value is usually reached in
10 to 15 minutes. If the winding is wet or dry or dirty the steady value is usually
reached in 1 or 2 minutes after the test voltage is applied.
d. The recommended minimum IR value for AC and DC machines is determined by
the following empirical relationship.
IR = kV + 1
Where IR = recommended minimum IR in mega ohms at 40°C of the entire
machine winding and kV = rated machine voltage in kilo volts.
Temperature correction is to be applied, if winding is not at a temperature of
40°C.
e. IR of the one phase of three phases winding with other two phases earthed, is
approximately twice that of the entire winding. Therefore when the three phases
are tested separately, the observed insulation resistance of each phase should be
divided by two to obtain a value which after correction for temperature, may be
compared with the recommended minimum value of IR.
13. What is use of Tan – Delta test? And what are the recommended values?
The very purpose of this test is to detect moisture content, voids, cracks and
deterioration in the insulation and same is to be conducted on HT motors.
Based on the guidelines given in the article ‘Diagmistic testing on the winding
insulation’ by J. S. Simon (IEE vol. 127 may 1980) the contamination level of motor
winding is to be assessed from the given Tan – Delta value.
Starting Tan – Delta values Degree of contamination
0 – 4%. Low void content.
4 – 6%. Clean.
6 – 10%. Some dirt.
10 – 14%. Dirt and moisture.
14 – 16%. Gross contamination.
Question and answers Electrical Maintenance Unit
- 193 -
16 – 20%. Heavy deposit of oil dirt.
Above 20%. Severe oil and carbon contamination.
Question and answers Electrical Maintenance Unit
- 194 -
14. What are important guidelines for conducting HV test?
Based on the recommendations given in IS: 4029:1977 decided DC test voltage
= (2E+1kV) 1.6 * M
Where E = rated voltage.
2.6 = AC to DC conversion factor.
M = derator factor which is a function to be decided on the basis of the age and
condition of equipment.
The DC voltage applied in steps and the leakage current recorded at each step. A plot
leakage current Vs test voltage is to be plotted as the test progress.
Some recommendations of IS : 4029 : 1977.
a. The HV test made on the windings on acceptance shall as far as possible not be
repeated. If however a second test to be made at 80% of the voltage given by the
empirical formula given above.
b. Test voltage for completely rewound motor = full test voltage for new motor.
c. Partially rewound or overhauled motor = 75% * full test voltage for a new motor.
d. Before the test for the old parts of the winding shall be carefully cleaned and
dried.
e. Before attempting of HV DC test a minimum PI value of motor should be
obtained.
15. What are the uses of high voltage surge test?
This test gives distinct wave forms giving indications of various defects such as,
a. Turn to turn short in same phases.
b. Coil to coil short in same phases.
c. Partial phase to phase short.
d. Complete phase to phase short.
e. Improper coil connections.
f. Reverse coil connections.
g. Open coil connections.
h. Short to ground partial.
i. Short to ground complete.
Question and answers Electrical Maintenance Unit
- 195 -
16. What is the thumb rule for motor current?
Thumb rule for NO LOAD current of motors.
Type of enclosure No. of poles % No Load current of rated current
TEFC 2 15 – 20
TEFC 4 30 – 35
SPDP 2 25 – 30
SPDP 4 35 – 40
SPDP 6 to 8 50 – 55
SPDP 10 80
Note: TEFC (Totally enclosed fan cooled) motors are low inductive having low
active material in comparison to SPDP(Screen protected drip proof) motors.
Thumb rule for calculating positive sequence and negative sequence current in
motors.
a. Positive sequence current: Average of all three phases currents.
b. Negative sequence current: Maximum deviation of any of the phase currents from
the average.
17. How you evaluate the insulation condition based on PI value?
Evaluation of insulation condition based on PI value
PI value Insulation condition Recommendation
1.0 – 1.5 Bad Drying is mandatory
1.5 – 2.0 Doubtful Drying is recommended
2.0 – 3.0 Adequate No drying is needed
3.0 – 4.0 Good No drying is needed
> 4.0 Excellent No drying is needed
18. What are the conditions monitoring for the motor bearings?
Bearing oil analysis is a useful tool in determining bearing performance and possible
deterioration. Periodic checks for oil colour, viscosity and acidity can aid in
preventing or anticipating bearing failure.
Oil analysis tests
Symptoms Possible cause Test Cost
Viscosity Water or high Water content Low
temperature ASTM 445 viscosity Low
ASTM 974 neutralization number Low
ASTM 664 neutralization number Moderate
Viscosity change
colour change
Oxidation
ASTM 2296 neutralization number Moderate
Spectroscopy Low
Particle count Moderate
Direct reading ferrography Moderate
Particles Bearing
deterioration or
foreign matter
Analytical ferrography High
Question and answers Electrical Maintenance Unit
- 196 -
Question and answers Electrical Maintenance Unit
- 197 -
Important test on electrical equipments
1. Tests on transformer.
Test Purpose Item Required condition of machine
IR value
And
PI value.
Detects serious flaws,
moisture absorption and
cleanliness of winding.
Winding. Winding has to be isolated.
Tan delta or
dielectric
loss or
power factor
or HV test.
Indicates insulation
deterioration,
contamination and
physical damage.
Winding,
oil and
bushings.
Winding has to be isolated, oil
sample should be collected.
Excitation
current at
high voltage.
Indicates defects in the
magnetic core structure,
shifting or windings,
failures in turn to turn
insulation.
Winding Winding has to be isolated.
Turns ratio Indicates short circuited
turns and internal
connections
Winding Winding has to be isolated
Winding
resistance
Detects poor
connections and
conductor shorts
Winding Winding has to be isolated
Core IR and
inadvertent
grounds
Indicates deterioration
of core insulation
system
Core Winding has to be isolated
Water
contents
Indicates moisture level
in oil
Oil Oil sample has to be collected
Total acidity,
neutralization
number
Measures organic and
inorganic acids
Oil Oil sample has to be collected
Dissolved
gas analysis
Indicates specific gases
generated
Oil and
winding
Oil sample has to be collected
Furanite
compounds
Indicates cellulose
degradation
Winding Oil sample has to be collected
Question and answers Electrical Maintenance Unit
- 198 -
Question and answers Electrical Maintenance Unit
- 199 -
2. Test on Circuit breakers
Test Purpose Item Required condition of machine
IR value Detects serious flaws,
moisture absorption and
cleanliness.
Overall
insulation
system
CB has to be isolated
Dielectric
loss or tan δ
Indicates insulation
deterioration,
contamination and
physical damage
Overall
insulation
system
CB has to be isolated
DC HV test
(optional)
Determines condition of
insulation
Overall
insulation
system
CB has to be isolated
Contact
resistance
measurement
Detects poor contacts Contacts CB has to be isolated
Timings Detects faulty dashpots,
faulty adjustments,
weak accelerating
springs, defective shock
absorbers, buffers and
closing mechanisms, or
broken parts
Overall
breaker
CB has to be isolated
3. Tests on power cables
Test Purpose Component Required condition of machine
IR value Detects serious flaws,
moisture absorption
and cleanliness
Overall
insulation
system
Cable has to be isolated
Dielectric
loss or tan δ
Shows insulation
deterioration,
contamination and
physical damage
Overall
insulation
system
Cable has to be isolated
DC step
voltage test
Determines condition
of insulation
Overall
insulation
system
Cable has to be isolated
Resistance
of bolted
connection
Detects poor
connections
Bolted
connection
Cable has to be isolated
Question and answers Electrical Maintenance Unit
- 200 -
Question and answers Electrical Maintenance Unit
- 201 -
4. Tests on surge arrestor
Test Purpose Component Required condition of machine
IR value Detects serious flaws,
moisture absorption
and cleanliness
Overall
insulation
system
Arrestor has to be isolated
Watts loss
test
Shows insulation
deterioration,
contamination and
physical damage
Overall
condition
Arrestor has to be isolated
Resistance
of bolted
connection
Detects poor
connections
Bolted
connection
Arrestor has to be isolated
5. Tests on HV motors
Test Purpose Item Required condition of machine
IR and PI
value
Detects serious flaws,
moisture absorption and
cleanliness of winding
Stator and
field
Winding has to be isolated
Tan delta
or power factor
test
Evaluation of stress
grading, dielectric losses
and homogeneity of the
winding insulation
Stator
winding
Winding has to be isolated
DC Winding
resistance
Detects poor connections
and conductor shorts
Stator and
field winding
Winding has to be isolated
AC Impedance
on poles test
Detects the presence of
short circuit turns
Field
winding
Winding has to be isolated
DC HV step
voltage or
leakage current
test
Detects insulation
weakness and possibility
or warning of breakdown
of incipient fault
Stator
winding
Winding has to be isolated
Surge voltage Determines healthiness of
turn insulation
Stator
winding
Winding has to be isolate
Partial
discharge or
corona or TVA
probe.
Evaluation of stress
grading system and
location of partial
discharge sites
Stator
winding
Winding has to be isolated and rotor
has to be threaded out
ELCID test
(optional)
Determines healthiness of
stator core inter
lamination insulation
Stator core Rotor has to be threaded out
Online motor
current
signature
analysis
To determine the
healthiness of the motor
by giving all the electrical
parameters, harmonic
analysis, rotor bar heath
and bearing problems
Motor Online condition
Wear debris Bearing condition Bearing Bearing oil or grease sample has to
Question and answers Electrical Maintenance Unit
- 202 -
analysis for oil
or grease
assessment be collected
Question and answers Electrical Maintenance Unit
- 203 -
6. Tests on HV generator
Test Purpose Item Required condition of machine
IR and PI Detects serious flaws,
moisture absorption and
cleanliness of winding
Stator and
field
winding
Bus bar and neutral connection
has to be isolated
Tan delta or
power factor
test
Evaluation of stress
grading, dielectric
losses and homogeneity
of the winding
insulation
Stator
winding
Bus bar and neutral connection
has to be isolated
DC winding
resistance
Detects poor
connections and
conductor shorts
Stator and
field
winding
Bus bar and neutral connection
has to be isolated
DC step
voltage or
leakage
current test
Detects insulation
weakness and
possibility of warning of
breakdown of incipient
fault
Stator
winding
Bus bar and neutral connection
has to be isolated
Partial
discharge or
corona or
TVA probe
Evaluation of stress
grading system and
location of Partial
Discharge sites
Stator
winding
Bus bar and neutral connection
has to be isolated. Stator slot
exits are be accessible and if
necessary rotor has to be
threaded out
ELCID test Determines healthiness
of stator core inter
laminar insulation
Stator core
insulation
Rotor has to be threaded out in
TG’s, where as rotor poles has to
be removed minimum in case of
HG’s.
Wedge
tightness
check
Determines wedge
tightness
Stator
wedge
Rotor has to be threaded out
AC
impedance
test
Detects the presence of
short circuit turns
Field
winding
Rotor winding should be isolated
from the excitation system
Recurrent
surge
oscillograph
Detects interturn and
earth faults in winding
Field
winding
Rotor winding should be isolated
from excitation system. Test can
be carried out without threading
out the rotor also
O.C.C Detects shorted turns Field
winding
Online test
Thermal
sensitivity
test
Detects vibration cause Rotor Online test
Partial
discharge
To assess de-lamination,
stress control and slot
Stator
winding
PDA coupling coils has to be
fixed to the machine
Question and answers Electrical Maintenance Unit
- 204 -
analysis support tightness
Question and answers Electrical Maintenance Unit
- 205 -
ELECTRICAL SYSTEM
• What are the design objectives of Electrical System?
a. To evacuate generated electrical power.
b. To provide required power to SUT, UT, DG, UPS, and CUPS.
c. To provide required emergency power from onsite DG, UPS & CUPS.
d. To provide Fast transfer in event of Class IV failure. Emergency transfer in
events of Class III and Class II failure.
e. Load shedding in event of one DG available.
f. To provide un-interruptible or few milli seconds interrupted power supply by
UPS and un-interruptible power supply by CUPS.
g. To provide operational flexibility by providing required qualities of requirement.
h. To provide isolation, Alarms, indication, protection of the system.
i. To provide fire protection.
j. To provide surge and lightning protection.
k. To provide adequate lighting.
l. To provide equipment earthing, system earthing, and personnel protection.
m. To provide necessary electrical and physical isolation of electrical equipments.
• What are the design guidelines for electrical system?
a. All safety related equipments are in control building, SRPH and are designed for
SSE conditions. As per studies seismic condition is not there within 5 kms and
nearest zone is away from 20 kms.
b. Safety related equipments are separated from suitable fire barriers of 3 hrs rating
by horizontal and vertical clearances and from turbine building which are houses
high energy rotating equipments and where potential for fire is exist.
c. Separate switchyard control is provided in case of non-availability of main
control room with line and bus coupler protection and bus bar protections.
Control room posses SUT, UT, GT, Generator and all classes of power supply
control and protections.
d. Protection panels of Generator, GT, and UT are separated from SUT in physical
to have system flexibility.
e. SCADA is provided in CER, TB and in switchyard separately.
f. EMTR for each A and B groups are separated.
g. Control supply for switchyard is separated from operating island.
h. To reduce fault level in lighting circuits separate 280-kVA transformer is
provided.
Question and answers Electrical Maintenance Unit
- 206 -
MAIN GENERATOR AND IPBD
• How output of the generator is depends?
Output of the generator is the function of volume, length, dia, airgap, and speed.
• What you mean by Gas pickup method?
Sucking cooled hydrogen gas from the air gap, circulating in canals and removing
the heat from the rotor. While sucking the gas, gas comes through the stator parts
also and removes the heat from the stator parts. The heated gas circulated to the
hydrogen for cooling purpose by the fans installed at rotor shaft. Thus the stator and
rotor of the generator is cooled. This method is called Gas pickup method.
• When the hydrogen explosion will take place in main generator?
When hydrogen concentration in air is more than 4% and less than 74% causes the
explosion.
• Can we excite generator without hydrogen? No
• What are the advantages of stator water?
a. High thermal capacity
b. Low electrical conductivity (Good insulator)
c. Low viscosity
d. Free of fire risk and non-toxic
e. Simple heat exchanger i.e. it can be circulate easily and cooled by heat exchanger
• How rotor windings are held in position against centrifugal force?
Rotor windings are held by duraluminium wedges and by non-magnetic steel
retaining rings in the overhang portion.
• What is the purpose of current carrying bolts in rotor?
Feeding DC current from slip ring to rotor winding.
• How rotor cooled?
Hydrogen picked up from stator core backspace, passes through ventilation canals on
rotor and comes out through adjacent canals. Shaft fans aid the hydrogen flow. Heat
from the hydrogen removed by 4 nos. of hydrogen coolers. (NAPW)
• What is rotor E/F relay setting?
1.0 mA
• Are we using DCCB in the plant?
Question and answers Electrical Maintenance Unit
- 207 -
Yes, generator field breaker
• How arc is quenched in Generator Field Breaker?
By magnetic blow out coils, arc is elongated very fastly, so resistance of arc
increases, soon becoming unstable and quenched by arc chutes.
Question and answers Electrical Maintenance Unit
- 208 -
• How generator is protected from switching surges and lightning surges?
Surge capacitor and lightning arrestor.
• What is the use of generator PT’s?
AVR, Protection & Metering.
• What is the difference between PT and normal transformer?
Burden of PT is less and burden of normal transformer is high.
• What is the % overload allowed for TG and DG?
For TG nil
For DG 110% for 2 hours.
• When TG works as induction generator?
When excitation alone lost.
• Why motoring should be prevented in TG and DG?
In TG motoring prevented due to the turbine limitation otherwise last stage blade
will fails.
In DG motoring prevented, because of unburned fuel catches fire in DG.
• Why GFB closed only after reaching rated speed?
To prevent over fluxing of transformers or generator.
Emf = 4.44 f φ Z A
If f frequency is reduced due to less speed,
φ = V / f Z A
And flux will be more to saturate the core of transformers or generator.
• What are the protective parameters to changeover AVR auto to manual?
a. PT supply fail.
b. Auto pulse fail.
c. Supply of limiter fail.
d. Supply of auto channel fail.
e. Regulated supply fail.
f. High auto reference.
• Why AVR changes over to manual on AVR PT fuse failure?
Because loss of feedback to voltage corrector.
• Will main generator differential relay pick up for generator earth faults?
No earth fault current limited to 5A, while differential setting is 10%.
Question and answers Electrical Maintenance Unit
- 209 -
• Why generator differential provided?
For generator phase to phase faults and 3 phase faults.
Question and answers Electrical Maintenance Unit
- 210 -
• What is the effect of loss of excitation on generator?
Large induced currents in rotor leads to rotor end part over heating.
Leading VAR taken from grid leads to severe voltage dips in grid, if grid is weak.
Stability of machine lost.
Stator overheating.
Machine speed rises slightly.
• What are the limiters provided in excitation system?
a. Rotor current limiter (3000 A)
b. Rotor angle limiter (75° lag)
c. Under excitation limiter.
d. Stator current limiter (lead 10000 A)
e. Stator current limiter (lag 10000 A)
f. N – 2 limiter.
• What is the effect of unbalance currents in generator?
Double frequency currents are induced in metal parts of rotor and overheating of
retaining rings and non-magnetic wedges.
• Why low forward power relay used in parallel to reverse power relay?
A small steam leak through CIES valves will keep the machine floating on to grid at
low power. So even if turbine trip, relay picks up, there is no trip actually. So low
forward power relay (0.54%) used to detect the condition.
• Why earth fault current of generator should not be reduced below 5A?
To limit over voltage due to neutral shift.
• Why not high resistance for earth fault than using grounding transformer & resistor
0.45 ohms?
It is mechanically unwide. Difficult to manufacture.
• Why starting resistor is provided in barring gear motor?
Starting resistance at stator reduces voltage at stator terminals and accelerates the
motor very slowly so as to allow smooth gear engagement.
Other methods are
a) Auto transformer.
b) Star-delta starter.
• Will rotor earth fault relay operate for earth fault in main exciter winding or RCU
Diode Bridge also?
Yes.
Question and answers Electrical Maintenance Unit
- 211 -
• Why neoprene rubber bellows in generator IPBD?
Prevent vibrations transmitted from generator to IPBD.
• How moisture entry is prevented into bus duct?
Silicagel breathers at either end.
Question and answers Electrical Maintenance Unit
- 212 -
• Why aluminium bus duct is used?
Aluminium is nonmagnetic material.
Short circuit forces are less.
• Where fault level is more, whether in generator bus duct or UT bus duct? Why?
Fault level is more in UT bus duct. Because the fault currents fed by the both
generator and GT adds up within UT bus duct in case there is a fault in UT bus duct.
• Which is better, whether
a) Phase segregated bus duct or
b) Common bus duct?
Phase segregated bus duct is better, since phase to phase faults are avoided.
• Why cannot we have cables instead of bus duct in main generator?
Very large number of cables in parallel required problems of sealing the
terminations.
• What is the material of slip ring?
Alloy steel
• Why rotor impedance testing done during static and running condition?
To detect rotor earth fault.
• Which parameter indicates the rotor short-circuited turns (Not involving earthfault)?
Vibration increases.
• How stator water purity is held?
Filters, Vacuum pumps, Expansion tank, and magnetic filter.
• What are the routines checks on slip rings?
a. Correct mV drops brush to be used.
b. Brush tension adjustment.
c. Air cleaning to reduce leakage current.
d. Brush bedding before use.
e. Field polarity change every 6 months.
• Can we trip GFB from control room during unit operation?
No only if generator breaker is off.
• What is the voltage and frequency limit of generator?
±5%, ±5%
Question and answers Electrical Maintenance Unit
- 213 -
• What is the negative sequence capability?
I2 = 5% max,
I2
2 t = 7
Question and answers Electrical Maintenance Unit
- 214 -
• Why should we keep the brushes released during long shutdown?
Brushes wear out unevenly, when run on barring gear speed.
• How hydrogen purity reduces?
Due to seal oil vapour mixing.
• What is the purpose of back up impedance protection in main generator?
Covers inter-phase faults both externals to the GT and in GT. This also covers
partially faults inside generator, time delayed to coordinate with 230 kV-distance
protection.
• Why alternator rotor is made of solid iron?
Because, rotor flux = DC continuous
No iron loss problems.
• Why 50 Hz chosen?
Earlier 25 Hz generally used.
After developing of the high-speed turbine, 50/60 Hz standardized.
• Why oil cannot be used instead of water in generator stator?
Oil has high thermal capacity than gas, but low thermal capacity than water. Ability
to absorb heat is also less than waters.
High viscosity of oil causes linear flow and poor surface heat transfer in small ducts.
Large pumping power required.
• What is the purpose of JOP?
Lifts the rotor by injection of oil at high pressure, when BGM is in service. Outlet
pressure of JOP is 140 kg/cm2.
• What is the purpose of lubrication oil?
Keep oil film in bearings, avoid metal to metal contact between bottom of journal
and bearings avoid damage to bearings by lubricating the bearings. This also
removes heat from that part.
• What are the purposes of barring gear?
Start rotor from rest.
Eliminates sag in rotor - straighten and avoid rubbing at glands.
Avoid direct contact journals and bearings.
Avoid differential temp between top and bottom of cylinder due to convection of
Steam or hot air inside turbine cylinders.
Question and answers Electrical Maintenance Unit
- 215 -
• How shaft voltage produced by turbine?
Due to un-symmetry in the flux path of core, non-uniform air gap, un-symmetry in
the rotor magnetic field during short circuit in the rotor winding, causes voltage to
develop across the ends of rotor shaft.
Question and answers Electrical Maintenance Unit
- 216 -
• Why shaft-earthing brush is different from normal brush?
The contact resistance should be very low for shaft earthing brush, to prevent even
small current through the oil film, so used copper magnite brush or silver carbon
brush.
• What is the necessity of shaft voltage measurement?
It is to observe insulation of bearing 6 & 7 and hydrogen seal assembly. It requires
minimum leakage current (<100mA) through bearings and shaft seals to avoid pitting
of bearings.
If the leakage current >100mA, clean the insulation provided between bearing
pedestal and seal housing with earth.
• Why generator stator having alternate arrangements of hollow and solid conductor?
It ensures an optimum solution for increasing current and to reduce losses.
• What type of insulation is done for stator bars?
Bar insulation is done with epoxy mica thermosetting insulation. This insulation is
void free and possesses better mechanical properties. This insulation is more reliable
for higher voltages. Conductors are provided with glass lapped strand insulation.
After curing the insulation the epoxy resin (glue) fill all voids in the insulation.
• How carona discharge is prevented in generator insulation?
To prevent carona discharges between insulation and the wall of the slot, the
insulation in slot portion is coated with semi conducting varnish. This eliminates the
formation of creepage sparks during operation and during HV test.
• Why Generator should run within capability region?
Operating the Generator in excess of the capability curves will causes increase in
copper temperature, thermal expansion and higher insulation stresses.
• How cooling is done for slip ring and brush gear?
A centrifuge fan is mounted on the shaft in between two slip rings for ventilation of
the slip rings and brush gear.
• What is the type of brush used in brush gear?
Low co-efficient of friction and self-lubricating morganite grade carbon HM100.
Now a day we are using LFC554 for economical reasons.
• What is the name of instrument used to measure conductivity?
Gas chromato graph.
Question and answers Electrical Maintenance Unit
- 217 -
• What is the need of staggering of brushes and helical grooves?
The need of staggering is for uniform wear of brush and slip rings. The helical
grooved are provided to improve the brush performance by breaking air pockets. The
forced ventilation fan removes carbon dust from the helical grooves.
Question and answers Electrical Maintenance Unit
- 218 -
• What is the purpose of shaft earthing and bearing insulation?
The voltage generated in the shaft due to the leakage fluxes can circulate current
through the shaft. If shaft earthing is not done the leakage current will flow through
the bearings to ground and pitting of bearings will result. Hence bearing foundation
and pipelines are insulated.
• What is the purpose of POLARIZATION INDEX (PI) value?
It is used to assess the degree of dryness of windings. It depends on free ions in
insulating material. Initially for a new insulator free ions are less and hence more
resistance will be more. For old insulation initially free ions will be more depends on
age and material and hence resistance will be less. So the PI value for new insulation
will be more and for old insulation it will be less.
• What is the requirement of stator water electrical conductivity?
The cooling water must have an electrical conductivity less than 2.5 micro mho/cm.
One portable polishing unit consisting of mixed bed is also provided in the system to
remove impurities and maintain stator water conductivity at a less value.
• What is the necessity of Seal oil system?
The annular gap between stator and rotor of the generator are to be sealed to prevent
hydrogen leak from the casing.
Type of seal – ring type shaft seals
Pressure of seal oil – 4 kg/cm2
• What is the pressure of rotor gas (hydrogen)?
3.5 kg/cm2
• What is the paint used in the surface and interior of enclosure and why it is?
Matt black paint, for efficient heat dissipation.
• What is type of nut and bolts are used in IPBD?
Non-magnetic stainless steel nut and bolts are used in IPBD to restrict magnetic
effect at joints.
• Why flexible expansion joints are used in IPBD?
To cater thermal expansion and contraction due to heating and to eliminate
mechanical vibrations to the equipment.
Question and answers Electrical Maintenance Unit
- 219 -
• What are the salient features of IPBD?
a. This for a vital link between generator, GT, UAT, SPPT, SET and neutral
grounding transformer.
b. The continuous enclosure operating at ground potential limits the leakage flux
outside the enclosure to a very low value thereby eliminating the problem of
inductive heating of magnetic materials in the vicinity of the busduct.
c. Shielding effect of the enclosure reduced the electromagnetic forces under fault
conditions between bus to bus to a great.
d. The IPBD consists of high purity aluminium alloy bus supported by high strength
porcelain insulator (24 kV class) within enclosure separates adjacent conductor
by air. This eliminates phase to phase faults to a great extent.
e. Practically negligible inductive heating on adjacent steel structure.
f. High current carrying capacity. Because the conductors are of circular type
having very little skin effect and has a very large cooling surface.
g. Conductors are painted with epoxy Matt black paint results in heat dissipation and
the temperature rise is small and current carrying capacity is improved.
h. High dielectric strength as conductors are supported on porcelain insulators.
i. Air tight, watertight and dust free bus conductors. Hence maintenance is nil.
j. Separate parts erected IPBD. Hence changing parts makes it easy.
• Why neoprene rubber bellows are used in IPBD?
Neoprene rubber bellows are used near the terminals of the equipment and also at
building wall from indoor to outdoor area to allow thermal expansion and to
minimise vibrations.
• Why aluminium bus bars are silver-plated in IPBD?
Aluminium bus bars are silver-plated at flexible connection to prevent the galvanic
corrosion ant also for low contact resistance.
• Why seal-off bushings are used in IPBD?
To prevent interchange of air at different temperature and leakage of hydrogen or
infiltration of dust into the bus duct.
• What are the precautions to be taken while working at SPPT?
PT trolley should be isolated very carefully so as to isolate secondary terminals first
and primary (HT) terminals next. When primary isolated the arrangement in the
trolley make ground connection and HT terminal will be discharged at the drawn-out
position.
When fuse is blown the temporary earth should be done at the HT side of the fuse to
replace the fuse. Because PT may be energised through secondary side.
Question and answers Electrical Maintenance Unit
- 220 -
• What is use of hot air blower in IPBD?
To remove moisture and to prevent moisture condensation inside the duct at
commissioning time or in long shutdown periods.
Question and answers Electrical Maintenance Unit
- 221 -
• What are the temperature limits for UAT and SPPT bus bar?
2 kA (UAT) & 1 kA
Ambient temp 45°C 45°C
Maximum temp 60°C 60°C
Short circuit for 1 second temp 200°C (max load) 200°C(max load)
Bus material Al alloy Al alloy
Thickness 15 mm 6 mm
Dia 12.7 cm
• Specification of NGT & NGR.
NGT – 1 phase, natural cooled, indoor dry type, 16.5 kV / 250V, 50 kVA.
NGR – natural cooled, stainless steel grid type, 0.5Ω, 250V, 288A (continuous) and
temperature rise allowed to 375 °C.
• Surge protector and potential transformer cubicle specification.
Surge protector – non-inflammable, synthetic liquid impregnated and hermetically
sealed, 24KV, 0.25μ f (micro farad).
PT – 16500/√3 /110/√3 volts. Fuse – 24kv, 3.15A.
• How the power of the Generator can be varied?
Injecting inlet steam to the prime mover can vary active power. Reactive power can
vary by the Generator main field voltage variation. An excitation change PF at which
load is delivered.
Active power is produced by source and used effectively. VAR is the power used for
magnetization of core of transformers, motors, generators, overhead transmission
lines (capacitive), household appliances etc.
• What is the protection for IPBD?
Generator – GT overall differential protection.
• How the liquid in generator can be detected?
There are three liquid detection devices provided for the same purpose.
• Why and where the magnetic filter is provided in stator water circuit?
Magnetic filter is provided to catch the metal particles in stator water circuit, which
are produced in the pipelines. This is mounted at the end of the circuit nearer to the
inlet of the generator.
• What are the isolations required for working on IPBD/ Generator?
a. Generator field breaker open and tagged.
b. GT breaker open and earth switch closed.
Question and answers Electrical Maintenance Unit
- 222 -
c. Barring gear motor stopped and tagged.
d. Generator PT’s isolated and tagged.
e. CB 472 and CB 474 open and PT’s are isolated and tagged.
f. Before doing any work on brush gear 64F1 relay to be taken out.
Question and answers Electrical Maintenance Unit
- 223 -
• What are the futures of turbine generator?
a. Low heat drop
b. Moisture control (HP-0.26%, LP-3%.)
c. Turbine governing system
d. 70% steam dumping to the condenser to avoid reactor trip.
e. Gland sealing
f. LP exhaust hood cooling
g. Generator stator and rotor cooling
h. Hydrogen sealing
i. Static excitation
• What are the intervals for generator overhauling?
a. 1st inspection after 8000 hrs of working
b. 2nd inspection after 8000 hrs of 1st inspection
c. 3rd inspection after 24000 hrs of 1st inspection
d. 4th inspection after 48000 hrs of 1st inspection
• Write nameplate details of the main generator.
Type THW-235
kW 237700
kVA 264000
Voltage 16500 V
Amps 9240 A
Power factor 0.9 lag.
Field voltage 326 V
Field current 2755 A
Insulation Class-F
Speed 3000 rpm
50 Hz, 3, double star connection.
• What are the torque settings used in IPBD connection?
M12 (Nut bolt) 4506 100 kg-cm or 55 NM
M16 (Nut bolt) 9006 250 kg-cm or 80 NM
M20 (Nut bolt) 18006300 kg-cm or 100 NM
• Write critical speeds of turbine generator?
Generator rotor
1st critical speed 1283 rpm
2nd critical speed 3600 rpm
Combined turbine generator
1st critical speed 1938 rpm
2nd critical speed 2120 rpm
Question and answers Electrical Maintenance Unit
- 224 -
3rd critical speed 2385 rpm
4th critical speed 2837 rpm
Question and answers Electrical Maintenance Unit
- 225 -
• What type of governing system used in turbine and what are the purposes of the
system?
Hydraulic governing system of centrifugal (speed) governer type is adopted in
turbine.
Sensitive oil pressure to actuate centrifugal governer is 6.1 kg/cm2 (max). At 6.7
kg/cm2 relief valve is attached for on load testing.
Relay oil at pressure 21 kg/cm2 (max) is used to actuate HP CIES valve, governer
valve, LP CIES valve and LP governer valves.
At speed of 2560-rpm governer system becomes effective and starts draining of
sensitive oil to 2.81 kg/cm2 as speed is 2760 rpm and this is the governer take over
speed. Once the speed takes over by governer, governer valves position comes to
closing side and then CIES valves are opening fully. At this stage further opening of
CIES valve does not change any speed of system and the speed depends only on
governer valve opening position and speeder gear system.
HP speeder gear controls HP governer valves and LP speeder gear controls LP
governer valves and closes fully when 6% over speed which starts when 3% over
speeding.
The main purposes are as follows.
a. Bring the TG to rated (synchronous speed) speed from rest.
b. Loading and unloading when synchronised.
c. Responding with grid frequency variations within design rage and loading and
unloading the machine so that grid frequency remains stable.
d. Limiting the load as per reactor load.
e. Protecting the machine from over speed and from sudden large load thrown off or
trip.
f. Tripping the machine and bringing it on barring gear when event for not operation
happens.
g. When synchronised the speed is regulated by speeder gear from BPC signal. Once
synchronised the grid frequency and speeder gear controls the speed.
• Why inter-turn protection is provided along with differential protection in generator?
Inter-turn protects two separate windings from the fault of the generator.
• How patina formation is done.
By injecting low excitation current of 50 Amps for half an hour interval to 250
Amps. (Epoxy insulation in the stator winding absorbs no moisture).
Question and answers Electrical Maintenance Unit
- 226 -
• What are the tests to be carried during PM checks of IPBD?
a) Physical inspection of bus for any spark or overheating or discoloration.
b) Physical inspection of copper braided flexibles for discoloration.
c) Physical inspection of inspection window gaskets, seal off bushings, supporting
insulators, CT’s, painting of IPBD.
d) Torque tightness of flexibles.
e) Connection tightness of CT’s, SPPT cubicle, NGT cubicle, CT’s master JB, and
Generator terminal bushing connection.
f) Tightness of supporting insulator, seal off bushing, inspection windows
g) Inspection of rubber bellows
h) Electrical checks on SPPT, NGT, CT, mVDT of copper flexible connection.
i) Capacitance measurement of surge capacitor.
j) Healthiness checks of lightning arrestor.
k) HV test of IPBD
l) Tan-delta test of IPBD
m) IR value measurement
n) Cleanliness checks entire IPBD.
• What are the works to be done in generator in major overhauling?
Works on stator
a) Hydro test (DM water at 5 kg/cm2 pressure, leak acceptable is 5% for 24 hrs).
b) Hydro test of H2 coolers (DM water at 4 kg/cm2 for 30 seconds no leak is
allowed)
c) Pneumatic test with mask air.
d) Drying out of stator conductor. Hot air blower is used.
e) IR value check.
f) Stator overhang portion inspection.
g) Inspection of Teflon tubes and rubber grummets.
h) Stator wedge tightness test with 200 grams hammer.
i) Inspection of RTD’s.
j) Maintenance of end shields.
k) Hot air and hot water test of stator conductors to check whether flow through all
stator conductors is uniform.
l) Measurement of IR and PI value.
m) Capacitance and tan-delta measurements.
n) Partial discharge test.
o) Winding resistance measurement.
p) DC step voltage.
q) ELCID (electromagnetic core imperfection detection) test.
Question and answers Electrical Maintenance Unit
- 227 -
Works on Rotor
a) Nitrogen leak tightness test of CC bolts at 4 kg/cm2.
b) Inspection of rotor slots.
c) Purge test of rotor ventillation canals.
d) DP test on slip-ring hub to detect micro crack.
e) DP and Ultrasonic test on retaining rings to detect any cracks.
f) Measurement of IR and PI value.
g) Impedance measurement.
h) Recurrence surge oscillograph.
i) Winding resistance measurement.
j) Slip-ring groove cutting and machining.
k) Patina formation. Then OCC test.
• What is the purpose of tan-delta measurement?
Insulation in electrical system has parameters such as Capacitance, Die-electric loss,
and Power factor. By detecting the changes in these parameters failures can be
revealed. In this tan-delta test measured quantities are dissipation factor, power
factor, capacitance and dielectric power loss.
The very purpose of this test is to detect moisture content in the insulation. This
detects moisture and void in the insulation. This indicates amount of ionization.
• What is meant by partial discharge? How can be tested?
Partial discharges are electrical sparks, which occur in gas voids within the insulation
when the voltage is high enough. The discharges are partial since there is some
insulation remaining to prevent a complete breakdown. Partial discharge can erode
the insulation and therefore contribute to insulation ageing.
This can be tested by electromagnetic probe, which is a detector that is sensitive to
the radio frequency signals produced by the partial discharges within the winding.
With this probe test it is possible to locate specific sites of deterioration within the
winding when the winding is energized.
Question and answers Electrical Maintenance Unit
- 228 -
• What is the purpose of HV / leakage current test on stator?
This is to find out weakness in the stator winding. If the ambient conditions are right,
and the insulation is weak, the leakage current will increase non-linearly.
The record of voltage versus leakage current provides the condition of the winding
for present and future use and may permit prediction of breakdown voltage whether
it is within or slightly above the test voltage.
HV test voltage = 1.5 * rated voltage for AC
And DC voltage = (2E + 1 kV) 1.6
Where E – rated voltage.
1.6 – AC/DC conversion factor.
Application of HV voltage also depends on the age factor or condition of the
machine.
Following are the findings of HV test.
a) Capacitance charging current.
b) Dielectric absorption current.
c) Surface leakage current.
d) Partial discharge current.
e) Volumetric discharge current.
In HV test starting leakage current should be more than switching off current in
􀀜 Amps.
• What is Recurrent Surge Oscillograph (RSO) Test?
RSO test is performed to detect faults in rotor windings. The electrical faults in
generator rotors fall into two main categories. The faults from the winding to the
body and the faults between the parts of the winding (inter-turn faults). The existence
of the faults will frequently display excessive mechanical vibration and cause serious
concern.
• What is the purpose of rotor AC Impedance measurement?
Periodic measurement of rotor impedance using an AC power supply is another
means of detecting the presence of shorted turns in a rotor winding. Impedance
measurement is more sensitive than the resistance measurement for the detection of
shorted turns. This is because the induced backward current in a single shorted turn
opposes the MMF of the entire coil, thus greatly reducing the reactance.
Question and answers Electrical Maintenance Unit
- 229 -
• What is IR and PI value? Why it is measured?
IR It is the ratio of the DC voltage applied between the terminals and ground to the
resultant current. When the DC voltage applied three components flow,
a) A charging component flows into the capacitance of the winding.
b) A polarization or absorption current involving in the insulation molecular
mechanism.
c) A leakage component over the surface between exposed conductor and ground
which is highly dependent on the state of dryness of the winding.
The first two current components decay with time. The third component is
determined by the presence of moisture or ground fault and relatively constant with
time. Moisture may be with in the insulation or condensed on the end windings or
connection surfaces, which are often dirty. If this leakage current is larger than the
first two components then the total charging current will not change significantly
with time. Thus to determine how dry and clean the winding, IR is measured after
one minute and after 10 minutes. The ration of the 10 minutes reading over the oneminute
reading is called the PI (Polarization Index).
PI value detects relative condition of insulation with respect to moisture and other
contaminants.
• What is the generator IR value when generator is filled with stator water and
hydrogen?
Generator IR when filled with stator water and hydrogen is about 100 kΩ only. That
is because most of the gases and liquids are self-restoring insulators. As we are
measuring insulation with 1 kV or 5 kV megger, the ionic current or leakage current
will be same and the IR value will be approximately same. As we are increasing the
test voltage to higher value say to 100 kV the breakdown point will occur as in the
graph and insulators will breakdown or puncture.
Ionic current
Leakage
Current
Saturation region
Voltage (kV)
Water and hydrogen are self-restoring insulators. First we are measuring insulation
on 1 kV voltage i.e. 100 kΩ. As the field voltage and stator voltage raises the heat
produced in the stator and rotor will increase the IR value of the machine in running
condition.
So ionic current region needs 1 kV/cm, saturation region moderate voltage (1 kV to
70 kV), and breakdown region is above 70 kV voltage.
Question and answers Electrical Maintenance Unit
- 230 -
• What is the purpose of DC winding resistance test?
To detect the shorting of winding and loose or poor connection of the windings.
Question and answers Electrical Maintenance Unit
- 231 -
• What are the types of Grounding?
Equipment grounding is the grounding on non-current carrying metal parts. This is
done for personnel safety of the operator and for the equipment safety by blowing
the fuse when earth fault current flows through the fuse.
Neutral Grounding is done to protect the equipment against arcing grounds, to
protect system from lightning surges by passing surge current through the earth and
to protect against unbalanced voltage with grounds. When fault occurs the system
voltage increases ♦3 times. This gives stress on the system and failure of the
insulation if the neutral grounding not designed properly.
Mainly there are three types of neutral earthing
a) Directly
b) Resistance
c) Reactance
• What is Arcing Grounds?
When earth faults occurs, arc with the ground and phase will occur. The arc
extinguishes and restrikes as a repeated and regular manner. This is called Arcing
Ground.
• How neutral grounding adopted?
For above 3.3 kV and below 22 kV resistance grounding is preferred. In this voltage
level capacitive ground current is not large, so reactance grounding is not used.
For below 3.3 kV that for 415 V external resistance earthing is not necessary.
Because normal earthing (plate earthing) gives 1.5Ω resistance. This limits current to
E (R∅)
Ω
230/1.5=153A(Current limit without resistance).
For above 22 kV solid or direct grounding is used.
Reactance grounding is used where capacitive currents are large instead of resistance
grounding in transmission lines, generators etc. to neutralize capacitive current by
adding reactive current.
• How main generator earthing is done?
Generator neutral earthing is done through transformer and earth fault current is
limited through resistance, which is connected across the secondary of the
transformer. Generator 16.5 kV earth fault current is isolated from 220 kV through
GT. Only star point of the generator is grounded.
Question and answers Electrical Maintenance Unit
- 232 -
• How generator earth fault relay works?
100% earth fault relay works on the principle involving monitoring of neutral side
and line side components of 3rd harmonic voltages produced by generator in service.
Since the machine is grounded with reactance XL (transformer), a flow of 3rd
harmonic current is there in between ground and the machine neutral. Under healthy
condition the line and neutral impedance Z are fixed. Thus the 3rd harmonic voltage
(Vs) at machine line (VL3) and neutral end (VN3) should bear a constant ratio. When a
fault occurs in the machine winding the distribution of VL3 and VN3 undergoes a
change from that a healthy condition. In the extreme case if a fault occurring on the
machine neutral side, VN3 becomes zero and VL3 becomes Vs and vice versa.
The fault in Blind zone will be detected by VL3 neutral displacement module,
which is tuned to find frequency.
Blind zone
Neutral Line
Fault
Earth
• How generator protections are classified in nuclear power station?
Classification of generator protection in nuclear power station.
1. MAIN Protection 2. BACKUP Protection
Stator E/f Back up Impedance
Loss of Excitation Over Voltage
Pole slipping Under Freq.
Differential Over freq.
Inter turn 4. EXCITATION Protection
Unbalance current Excitation transformer over current
3. START UP Protection Rotor E/f. and Rotor o/v
Phase o/c during startup 48 V DC fail
E/F during startup more than 3 Bridge fail (¾ logic)
Manual channel fails
Transformer over temperature (Class –B)
• State torque formula.
Torque (T) = kT *S *IR *COSθ
Where T = Torque in pound – feet
kT = Torque constant.
S = stator flux
IR = Rotor current
cosθ = Rotor power factor
Question and answers Electrical Maintenance Unit
- 233 -
• How main generator protection grouped?
The various protections associated with the generator, Generator transformer and Unit
transformer are connected to a trip unit through trip relays 86A, 86B and 86C.
The protective levels of generator are in three classified groups Class A, Class B and
Class C protections which involve fault in the generator, Generator transformer and
requires high speed clearance are grouped under Class A. These are routed through
trip relays 86A. This trips generator transformer HV side breaker, generator field
breaker, and LV side breaker of UT and Turbine simultaneously.
Certain protections such as loss of excitation, negative sequence protection, overfluxing
etc., can tolerate sequential tripping of turbine followed by the generator such
that the entrapped steam in the turbine is fully spent before generator is tripped and
reduces the risk of over speeding of the turbine. These protections are classified as
Class B. These are connected to operate on trip relay 86BG. This relay initiates the
tripping of turbine (closure of stop valves) and also the LV side breaker of UT through
trip relay 86B1 and 86B2. After turbine stop valves are closed and the entrapped
steam is spent, the output power of the generator will come down and is sensed by
under power relay 32A and 32B. These interlocks are wired in series with the Class B
trip relay 86B, which is wired to trip the generator breaker, generator field. Obtaining
better security, the Under Power interlock circuits are duplicated. Some protections
such as Bus bar differential, generator under frequency etc, requires tripping only of
the 220 kV side of the generator transformer to isolate the external fault. These are
classified as Class C. These protections are wired to trip relay 86C, which initiate
only the tripping of the generator transformer HV side breaker. During Class C trip,
the generator will come on House load mode of operation.
Question and answers Electrical Maintenance Unit
- 234 -
• What are the generator protection parameters?
Generator protection parameters are as follows.
GENERATOR PROTECTION SCHEME
CLASS A1 CLASS A2
Gen. rotor earth fault (64F2) Stator O/C during start (50S ABC)
100% stator earth fault (64A) Stator E/F during start (64 C)
GT restricted earth fault (64 GT) Stator backup E/F (64 B)
UT restricted earth fault LV A (64 UT A) GT backup O/C (50/51 GT)
UT restricted earth fault LV B (64 UT B) GT backup E/F (51 N GT)
Gen. differential (87 G) Gen. backup impedance (21G – 1 ABC)
Gen. interturn (87 IT) Gen. field fail with U/V (27/40G)
GT overall differential (87 GT) UT backup O/C (51 UT ABC)
UT differential (87 UT A/B/C) UT backup E/F LV-A (51N LV-A)
Reverse power (37 G) UT backup E/F LV-B (51N LV-B)
GT buchholz, OLTC oil surge, fire (30 A/G/D) LBB protection (50 Z)
UT buchholz, fire (30 A/D)
Excitation O/C stage – 2
Rotor + & - ve over voltage
Excitation 48 V DC fail
More than 3 bridge fails (3/4 logic)
CLASS B CLASS C
Gen. field failure without U/V (40 G) Gen. backup impedance stage – 2(21G – 2)
Gen. negative phase sequence (46 G/GT) Gen. pole slip (78G)
Gen. over frequency (81 – 3) Gen. under frequency (81 – 1 / 2)
GT over fluxing protection (99 GT) GT backup earth fault (51N GT)
GT oil temp / winding temp high (30 C/E)
UT oil temp / winding temp high (30 C/E)
Low forward power (32 B/A)
Turbine process parameter trip (86 BG)
Excitation transformer temp high
Manual channel fails
Excitation transformer O/C stage – 1
Regulation under test
Question and answers Electrical Maintenance Unit
- 235 -
• State class – B process side trip parameters.
Sl Parameter Normal Value Low Value High Value Trip Value
1. Reactor trip + 200 milli sec
2. Reheater steam Pr. High 5.4 kg/cm2 c 5.75 kg/cm2
3. Exhaust hood steams temp. 93°C 149°C
4. Lub. oil Pressure low [0.35 kg/cm2
5. Relay oil pressure low 21 kg/cm2 17.38 kg/cm2 [ 3.5 kg/cm2
6. Trust bearing

7. Condenser vacuum low 696.5 mm Hg 660 mm Hg 559 mm Hg
8. Stator water cond. High 5 μ Mho / cm 13.3μ Mho 20 μ Mho
9. Stator water flow low 30 M3 / hr 21 M3 / hr 17 M3 / hr
10. Boiler level high 2/3 trip
• What are the manual trips required from the generator side?
Quantity 1st ann. Action/2nd ann. Action
Bearing babbitt temp. high 75°C 80°C >80°C manual trip
Bearing outlet oil temp. high 60°C 65°C >65°C manual trip
Generator seal oil inlet temp 45°C >45°C manual trip
Presence of liquid in Gen. Manual trip
DM water outlet temp 85°C Unload >85°C Rundown trip
Stator winding temp high 75°C Unload >75°C Rundown trip
Hot gas temp high 75°C Unload >75°C Rundown trip
Stator core temp high 95°C Unload >105°C Rundown trip
Rotor winding temp high 110°C Unload >110°C Rundown trip
Temp of cold hydrogen gas 55°C Unload >55°C Rundown trip
Temp of inlet water to gas coolers 37-48°C Unload >48°C Rundown trip
Temp of inlet water to stator winding 44-48°C Unload >48°C Rundown trip
Generator seal oil outlet temp 65°C >65°C manual trip
Purity of hydrogen in casing <97% <95% <95% manual trip
*Unload – Decreasing load to a lower value manually
*Rundown – Reducing load to no-load condition (manually/automatic)
• Why boiler level high trip has been provided in turbine?
In condition of boiler level high moisture contents in the steam will rise and rise in
moisture content is harmful to turbine.
Question and answers Electrical Maintenance Unit
- 236 -
• What are the characteristics of protection system?
CHARACTERISTICS OF PROTECTIVE SYSTEM
Protective relaying is an important requirement in power generation, transmission and
distribution, which identifies the exact location of the fault and give command for
isolating the faulty portion very close to the fault by sensing variations in electrical
quantities for ensuring safe operation. The protective relay should have the following
characteristics:
a) Reliability
The protective relay should operate positively and isolate the faulty portion of the
power system as and when required.
b) Selectivity
Protection is arranged in zone, which should cover the power system completely,
having no part unprotected. When a fault occurs the protection is required to select
and trip the only the nearest circuit breaker.
c) Stability
This term, applied to protection on distinct from power network, refers to the ability of
the system to remain inert to all load conditions and fault external to the relevant zone.
d) Speed
The function of automatic protection is to isolate fault from the power system in a very
much shorter time than could be isolated manually, even with great deal of
supervision.
e) Sensitivity
Sensitivity is a term frequently used when referring to the minimum operating limit of
a complete protective system. A protective system is said to be sensitive, if the
primary operating current is low.
Question and answers Electrical Maintenance Unit
- 237 -
• What are the working principles of generator main protections?
GENERATOR START UP PROTECTIONS
SUPPLEMENTARY PROTECTION OF GENERATOR
The generator is normally expected to run rated speed before excitation power is applied
by closing the field breaker. However the residual magnetism in the field circuit may
provide small voltage build up even when the machine is run upto its rated speed without
excitation. At this stage fault if any in the generator stator circuit may not be sensed by
the regular protection, as must of the relays are having higher current ranges. Hence
separate protection (Phase & Ground) are provided with low current ranges.
a) PHASE OVER CURRENT PROTECTION
The CT current is stepped down by an internal CT and converted to voltage signal. The
signal is compared with the internal reference. The protection is interlocked with the
auxiliary relay for the generator transformer breaker closed position to ensure that the
protection is inoperable when the machine is synchronized to grid.
b) GROUND FAULT PROTECTION DURING START UP
The generator neutral current as measure in series with the resistance of the secondary of
the earthing transformer is fed to the relay through CT. CT current is converted to a
voltage. This is compared with the internal resistance references. This protection also
interlocked with generator breaker position to ensure that the protection is inoperable
when the machine is connected to grid.
Question and answers Electrical Maintenance Unit
- 238 -
OTHER PROTECTIONS
a) STATOR EARTH FAULT PROTECTION (64A, 64B, 64C)
The conventional unit type generator has the neutral earthed through a resistance loaded
distribution type transformer. For a single ground fault near the neutral end of the
winding, there will be proportionately less voltage available to drive the current through
the ground, resulting in a lower fault current and lower neutral bus displacement voltage.
Low magnitude of fundamental ground current may flow under normal conditions,
possibly due to generator winding imbalance or due to fault on HV side of generator
transformer or on the secondary of generator PT. Under these conditions, the generator
should not be removed from service. To allow for these low magnitude earth fault
current, trip setting of the overvoltage ground relay are set to detect neutral displacement
voltage in excess of 5-10% of the phased neutral voltage.
If an earth fault occurs and undetected because of its location or otherwise, the probability
of second earth fault occurring is much greater. The second earth fault may result from
insulation deterioration caused by transient over voltage due to erratic, low current,
unstable arcing at first fault point. The second point may yield current of larger
magnitude.
A 100% stator earth fault protection is designed to detect earth fault occurring in the
region of the machine windings close to the neutral end. Composite static modular relay
that gives 100% earth fault protection of the machine, whose neutral is directly earthed. It
works on the principle of monitoring the neutral side and the line side of the component
of third harmonic voltage produced by the generator in service.
Question and answers Electrical Maintenance Unit
- 239 -
OPERATING PRINCIPLE
Alternating Current generator in service produces a certain magnitude of third harmonic
voltage in their winding. However no third harmonic voltage appear across the star/delta
connected generator, though there will be a certain magnitude of third harmonic voltage
between each phase and ground of the machine output. This voltage in case of machine
earth through high impedance can cause the flow of third harmonic current between the
ground and the neutral. In fact under normal healthy operating condition the third
harmonic voltage generated in the machine is shared between the phase to ground
capacity impedance at the machine terminal and neutral to ground impedance at the
machine neutral.
The figure-1 shows the third harmonic voltage distribution during normal working
conditions.
V3 = Generated third harmonic voltage.
VL3 = Third harmonic voltage at machine line end.
VN3 = Third harmonic voltage at machine neutral end
V3
VN3 VL3
Fig (1)
Whenever fault occurs at the point (Figure-2) say F on the machine winding, the voltage
distribution VN3 / VL3 undergoes a change from that during the running condition. In the
extreme case of a fault occurring on the machine neutral, the VN3 becomes zero and VL3
=V3. Similarly when the fault occurs on the phase terminal, VN3 become equal to V3.
The change in 3rd harmonic voltage will sense the relay and trip the generator.
N Line
Fault
V3
VN3
Faulty
VL3 Healthy
VN3 VL3 Faulty
Healthy
Question and answers Electrical Maintenance Unit
- 240 -
Fig (2) 3rd harmonic voltage distribution during healthy and faulty condition.
Figure-3 shows the VN3 Vs VL3 plot under healthy condition, it is clear that in order to
remain stable under healthy condition, the relay should restrain within the two lines L1 &
L2. The slopes of two lines are suitably set to ensure stability.
Line 1
Fault on neutral Healthy condition
VL3 Line 2
Fault on phase
VN3
The fault scheme of main generator is having first relay 64A, covers 100% of the stator
winding, the 2nd relay 64B covers 0-90% of stator winding from phase terminals. The 3rd
relay 64C used for the protection of stator earth fault during start-up.
Variation of neutral and line side
3rd harmonic voltage at load
Question and answers Electrical Maintenance Unit
- 241 -
b) GENERATOR UNBALANCE PROTECTION (46)
Negative phase sequence current in the stator of generator due to unbalance load, fault,
induces double frequency eddy currents in the rotor. This current if allowed to persist,
can cause serious over heating. The unbalance protection relay disconnects the machine
before such excess over heat. In order to avoid unnecessary tripping of the machine, the
time characteristics of the relay should match the heating characteristics of the machine.
The neg. phase sequence current creates magnetic flux wave in the air gap, which induces
current in the rotor body iron. These currents with twice rated frequency tend to flow in
the non-magnetic rotor wedges and retaining rings. Heating occurs in these areas due to
watt loss and quickly raises the temp.
DESCRIPTION
Figure-1 shows the block diagram of the unbalance protection relay. The input from the
CT which are connected in the each phase of the generator supply (Fig-2) are fed to a
negative sequence filter (Fig-3) which gives an a.c. output voltage proportional to the
negative sequence current. This voltage is rectified, smoothened and fed to the squaring
unit of the main measuring element, the time delay circuit and the alarm unit.
The output of the squaring circuit is proportional to the square of the input voltage and is
applied directly to the main timing circuit to give the required relation ship between I2t
and relay operating time (t).
The voltage upto, which the timing capacitor charge depends upon the voltage, applied
from the squaring circuit. This means that even when the negative current is less than the
relay setting, the timer circuit will partially charges and reduces the relay operating time
when the current exceeds the setting value.
When the output exceeds the reference voltage it provides one of the input to a 2-input
AND gate. The other input comes from the 0.3-sec timer, which is activated by the timer
starter unit when the relay setting exceeds the relay setting. When the both inputs to the
AND gate are present the relay will operate and trip the generator from fault.
OPERATING PRINCIPLE
The negative sequence filter shown in Figure-2 is connected in delta to eliminate the
effect of zero sequence currents. A fourth auxiliary transformer is provided to get a phase
shift of 180o Ic – A in figure–3. Vector diagram of both positive and negative sequence
current in the filter are shown in figure-4&5. It can be seen that the output produced
when negative sequence current is present, but zero when the current are of positive
sequence.
Question and answers Electrical Maintenance Unit
- 242 -
c) GENERATOR FIELD FAILURE PROTECTION (40)
Loss of field supply to a synchronous generator can be caused by a fault in the excitation
circuit or by incorrect opening of field breaker. On loss of field, the machine operates as
an induction generator excited by the reactive power drawn from the system to which it
connected. This could result in instability of power in the system and overheating the
rotor.
One parameter which changes significantly when the machine is subject to severe loss of
excitation is the impedance measured at the terminals and it move into the negative
reactance area. The relay is set to detect this abnormal operating condition using its
circular impedance characteristics, which lies in the negative reactance area.
OPERATION
Figure-1 shows the fundamental block diagram of the relay vector V and I are voltage
and current input to relay terminal. The input to the relay current circuit is through a CT
(T1), which is tapped on the both the primary, and the secondary windings to give a
course (K3) and medium reach (K2) setting of the relay. The relay characteristic angle is
continuously variable from 45o to 75o lagging by means of a potentiometer (Q). The
forward reach of the relay (Z) is continuously variable by means of potentiometer (K1) in
the voltage-restrained circuit of mixing transformer (T3).
Output vector S2 proportional to the vector V ± I Z of the voltage mixing transformer (T2)
forms the second input signal of the phase angle comparator. The comparator is a 2-input
block average comparator and operates by comparing the signal vector S1 & S2. The
output of the comparator is fed into a squaring amplifier whose output switches ON for a
positive input and OFF for a negative input. The output waveforms of the amplifier are
varying mark/space square wave, mark/space being equal for 90o-phase angle difference
between two inputs. The squared output is averaged by an auxiliary element set to just to
operate for an equal mark/space ratio. The current build up in the inductive auxiliary coil
to reach the operate level only if the ON period are longer than the OFF period. The L/R
ratio of the auxiliary coil and pick up level are accurately set. The output auxiliary relay
then picks up if the phase angle between the signal vector S1 & S2 are 90o or more as
shown in figure-2. Fig-3 shows the typical circuit connection for field failure protection
of generator.
Question and answers Electrical Maintenance Unit
- 243 -
d) GENERATOR POLE SLIPPING PROTECTION (78)
Sudden occurrence in the electrical grid such as rapid load changes, short circuit
interruptions, which destroy the equilibrium of the energy balance are usually followed by
oscillations. If the system stability is retained, the stationary stage will take over. If the
oscillations are not stable, a loss of synchronism of one or more machine will result. If
the angular displacement of the rotor exceeds the stable limit, the rotor will slip a pole
pitch. Pole slip occurs and excitation is maintained the machine will oscillate strongly on
reactive and active power side.
This relay operates on the principle of measuring impedance course on R-X diagram and
operates to trip on pole slipping condition. The scheme consists of two numbers angle
impedance relay and a timer to distinguish between pole slipping and power swing
blocking condition. When gen. Losses synchronism the resulting high current picks and
off freq. Operation can cause winding stresses, pulsating torque and mechanical
resonance that have potential of damaging the Turbine Generator.
X
Blinder Directional
Load Area
Q2 Q1 R
Operate Restrain
B Operate
A
Generator pole slipping protection
e) GENERATOR DIFFERENTIAL PROTECTION (87G)
This is a high-speed differential protection, the relay of high impedance is provided for
this protection. The high impedance principle is used for thorough fault stability even
under current transformer saturation.
This protection has an operating time of 25 millisecond at 5 time’s current setting. A
non- linear resistance is connected across the relay to limit the over voltage during
internal fault.
This protection covers phase to phase and 3-phase faults. It does not cover phase to
ground fault as the ground fault current is limited to a very low value. This protection
energizes Class-A trip.
Question and answers Electrical Maintenance Unit
- 244 -
Question and answers Electrical Maintenance Unit
- 245 -
f) GENERATOR INTER TURN DIFFERENTIAL PROTECTION: (87 GI)
This protection is by means of a differential current relay connected across crossconnected
CT on the two parallel winding of each of the phase of the generator as shown
in figure-2. The relay which is used for t he protection is of high impedance circulating
current type with an operating speed of 25 millisecond at 5 times the current setting. A
non-linear resistance is connected across the relay to limit the over voltage during the
internal fault. This protection energizes Class-A trip.
PRINCIPLE OF OPERATION (DIFFERENTIAL)
Fig-3 shows the simplified diagram of differential current protection of generator
winding, the CT’s of both end of the generator winding will sense the current which is
flowing through the stator winding. During normal balanced condition the current vector
I1 & I2 are equal and opposite so the resultant forces experiences in the coil of the relay R
is zero.
When the fault ‘F’ occurs on the stator winding, the differential current will be sensed by
the CT and these differential current passes through the operating coil of the relay which
gives trip signal to the circuit breaker of the generator.
Ground To load
Fault
I1 I2
I1 I3 I2
I1 + I2 = 0 Normal condition
I1 + I2 = I3 Faulty condition
Question and answers Electrical Maintenance Unit
- 246 -
GENERATOR BACK UP PROTECTIONS
a) UNDER FREQUENCY PROTECTION (81)
The U/F limitations however are less restrictive than the limitations on the turbine. A
turbine blade is designed to have its natural frequencies sufficiently displaced from rated
speed and multiples of N (speed) to avoid a mechanical resonant condition that could
result in excessive mechanical Stresses in blades
This is a three stage under frequency protection, which consists of a time delay unit and 3
timer. The three stages of frequencies are ranging from 47 to 50 Hz. The timer which
gives the cumulative operating time of turbine during under frequency which calls for
turbine inspection/maintenance as per the design formula.
(48.5-F) t < 3.
Where F is the frequency,
t is the timer duration in seconds.
From the above formula, it can be seen that the turbine can be operable at 48.5 Hz
continuously at rated load. The cumulative timer which gives alarm in Data acquisition
system then call for turbine inspection.
OPERATING PRINCIPLE:
The operating principle of the relay is the comparison of the incoming frequency with that
of a pre-set value of time derived from the oscillator of the relay.
The incoming frequency signal is connected to an input circuit, which then drive an
impulse generator to produce pulse at the beginning of each period of the input voltage.
The preset time interval is obtained from an oscillator and counter, adjustment is achieved
using selector switches, which drives the decoder circuit.
A comparator compares the two-time interval and this triggers an adjustable timer, which
then operate the output voltage. An under voltage detector inhibits the relay when the
incoming signal drops below the preset value.
b) OVER FREQUENCY PROTECTION (81)
Generator over frequency protection is provided to limit the over speeding of turbine,
which leads to greater vibration due to resonance. The over speeding and vibration leads
to mechanical damage of turbine bearings and blades. This protection schemes also
similar to under frequency. The preset time of over frequency operation is more than the
preset time of under frequency protection.
c) GENERATOR OVER VOLTAGE ALARM (59)
This protection give time delayed alarm for continuous operation of the generator at more than
permissible voltage of AVR failure or during manual control of excitation.
d) GENERATOR ANTIMOTORING PROTECTION (32)
Motoring results from low prime mover input to generator. While generator is still in line. When this
input is less than no load losses deficiency is supplied by absorbing real power from the system. Since
the field excitation should remain same, The same reactive power would flow as before the motoring and
generator will operate as a synchronous motor driving the turbine. Generator will not be harmed by this
action but turbine can be harmed through over heating. It is detected by low forward power relay.
Question and answers Electrical Maintenance Unit
- 247 -
EXCITATION SYSTEM PROTECTIONS
The generator is provided with static excitation, which obtains the necessary excitation
power from the excitation transformer, which rectifies and feed the AC power through
controlled rectifier circuits.
a) EXCITATION TRANSFORMER OVER CURRENT PROTECTION:
Time delayed over current protection with instantaneous high set unit is provided for the
short circuit protection of the excitation transformer, which trips the field breaker by
energizing class-B trip.
b) ROTOR OVER VOLTAGE PROTECTION:
This protection is envisaged to limit over voltage occurring in the field circuit during
excitation of the field an air gap arrestor with a series resistor is connected across the
field. On overvoltage the gap flasher over and the arrestor connects the resistor directly
across the field.
This over voltage is not due to the field forcing. Field forcing will happen only when PT
actual voltage value comes down due to the PT fuse drop or due to any other reason. At
that time PT voltage is 110 V – drop. That is actual voltage value is less and field forced
to increase the voltage. Field forcing value is twice the actual value after looking the
system healthiness. Means in some earth faults in the grid, the voltages may come down
to 110 kV and PT will sense this voltage as the generator is synchronised with the grid.
This will force the field of the generator to match the generator actual voltage. If the fault
not cleared the generator will trip after some time delay. This is generator field forcing.
But in some grid disturbances or power swing conditions the stator and rotor voltage and
current changes. This will induce some voltage in rotor. This protection is used to protect
machine from this type of over voltage.
c) ROTOR 1ST EARTH FAULT PROTECTION
A single earth fault is not in itself dangerous since it does not cause fault current, but a
second earth fault effectively short circuits parts or all of the field system and the
unbalancing of the magnetic forces causes. That force may be sufficient to spring the
shaft and make it eccentric. If the condition were allowed to persist, however it might
lead to severe mechanical damage.
The method of detecting rotor first earth fault using the principle of negative biasing,
where by an earth fault anywhere in the field circuit can be detected. The dc injection
supply establishes a small bias on the alternator field circuit so that all points are negative
with respect to earth.
The rectified output of the supply provides a biasing potential of approximately 65V.
This is connected with a positive terminal to earth and negative terminal to the positive
terminal of the field circuit through a relay. When the fault occurs, the current flows
through the relay coil which intern operate the circuit breaker. This relay will not operate
Question and answers Electrical Maintenance Unit
- 248 -
on auxiliary supply failed condition, during that time the relay will give annunciation in
main control room.
Question and answers Electrical Maintenance Unit
- 249 -
d) ROTOR 2ND EARTH FAULT (64F)
While the machine is continuous in service with one earth fault, appearance of 2nd earth
fault will severely affect the magnetic balance in the air gap and result in rotor distortion
and severe damage. Hence it is advisable that the machine taken out of service as early as
possible after appearance of 1st earth fault. However, to take care of the situation of 2nd
earth fault appearing immediately after 1st stator earth fault before the machine is taken
out, 2nd rotor earth fault protection is provided. This protection system normally
disconnect the field effect and has top be switched ON when 1st earth fault appears.
The scheme consists of a bridge circuit which to be balanced manually with the 1st rotor
earth fault in the machine. This balance is disturbed when the 2nd earth fault appears and
the bridge null deflector initiate tripping of the circuit.
It can be seen in the below diagram the protection of the field winding on either side of
the first earth fault and the balancing potentiometer forms a dc bridge with 64F2 (Relay)
connected across the pair of opposite modes.
64F2
1st E/F Balancing potentiometer
Field 2nd E/F Excitation supply
E Fig (1)
Fig (1)
Discharge resistor -ve
-ve Field winding
Excitation supply
+ve +ve
64 F1 Trip and alarm
Relay
Current limiting resistor
AC
Supply
Fig (2)
Question and answers Electrical Maintenance Unit
- 250 -
Question and answers Electrical Maintenance Unit
- 251 -
TRANSFORMER PROTECTIONS
a) OVERALL DIFFERENTIAL PROTECTION (87 GT)
This protection which is used as the differential protection of the transformer, also covers
the generator and unit transformer. The differential transformer protection measuring
circuit is based on the well-known MERZ-PRICE circulating current principle.
Fig-1 shows the relay functional block diagram. The output from each bias resistance
transformer T3 to T5 proportional to the appropriate primary line currents, are rectified
and summed to produce a bias resistance voltage. Any resulting difference current is
circulated through the transformer T1 & T2. The output from T1 is rectified and combined
with the bias voltage to produce a signal, which is applied to the amplitude comparator.
The comparator output is in the form of pulses which vary in width depending on the
amplitude of the combined bias and difference voltages where the measurement of the
interval between these pulse indicate less than a preset time, an internal fault is indicated
and a trip signal initiated after a short time delay (1/f sec), level set by the bias.
An unrestrained high set circuit, which monitors the differential current, will over ride the
amplitude comparator circuit and operate the relay output element when the difference
current is above the high set settings.
Fig-2 shows the basic circuit diagram of the differential protection and fig-3 shows the
current direction of the restraint/differential transformers in the relay. The currents I1, I2,
& I3 are the output of generator CT, UT CT and GT CT respectively. These currents is
passing through the star connected restraint transformer, the algebraic sum of vector
(I1+I2+I3 = I4) is passing through the differential transformer, which will give the output
for operating the relay (87).
b) OVER FLUXING PROTECTION (59V/F)
This is designed to protect the transformer from damages caused by the flux density in the
core exceeds the designed value. The excessive flux can cause serious overheating of
metallic parts and in extreme case can cause localized rapid melting of generator and
transformer core laminations. Over fluxing can be caused by regulator failure, load
reduction or excessive excitation with generator off-line it can also result from decreasing
speed while the regulator or the operator attempts to maintain rated stator voltage. Its
main application is to protect the transformers where, unless considerable care is taken,
the flux density can become excessive during the running up or running down sequence.
The flux density in the core depends on the ratio of terminal voltage (V) divided by the
frequency (f). Normally the over fluxing withstand characteristics of the transformer are
120% over fluxing for 2 minutes
135% over fluxing for 1 minutes
140% over fluxing for 5 seconds.
Whenever the v/f ratio of the transformer exceeds the pre-set time, the relay will operate
and initiate
• Running down the AVR if the machine is off the bus bar.
• Tripping the GT breaker.
Question and answers Electrical Maintenance Unit
- 252 -
Question and answers Electrical Maintenance Unit
- 253 -
OPERATING PRINCIPLE:
The basic principle of the relay is to produce an alternating voltage, which is proportional
to the ratio of voltage & frequency, and to compare this with a fixed voltage. When the
peak of the alternating voltage exceeds the fixed dc reference, the first timer is started. At
the end of the fixed timer cycle the second adjustable timer is initiated.
To obtain the correct measuring quantity the applied voltage V is converted to a current
by means of a resistor R. This V/R is arranged to flow through a capacitor C to produce
an output voltage
V/2 π f RC.
Over fluxing relay which consists of Voltage/Frequency measuring circuit, which output
is given to a comparator, compares with dc reference and to give an output after a fixed
time delay of 0.5 to 1.0 seconds. After the end of fixed time delay, the 2nd variable timer
initiates. The fixed time auxiliary has one of its two pairs of contact wired out which is
normally arranged to operate a follower.
c) GENERATOR TRANSFORMER RESTRICTED EARTH FAULT PROTECTION (64)
In addition to overall differential protection, a restricted earth fault protection covering
the transformer HV winding only is provided. The zone of protection extends from CT
provided on the transformer neutral end to the CT provided on the transformer bushings.
The relay is high impedance type and high speed of operation. A non-linear resistance is
connected across the relay terminal to limit the voltage developed during serial internal
fault. This protection energizes Class-A trip of the turbo-generator.
REF relay
Transformer
SCHEME OF RESTRICTED E/F PROTECTION
d) GENERATOR TRANSFORMER BACK-UP OVER CURRENT PROTECTION FOR PHASE FAULT (51)
This protection consists of a 3 phase over current relay. The relay is 3-pole version of
very inverse time over current relay plus high set instantaneous over current relay. This
will act as the back up protection for the transformer fault due to the fault current flowing
from system side. This may also serve limited back up protection function for fault
external to the transformer. This will energize Class-A trip.
R
Question and answers Electrical Maintenance Unit
- 254 -
e) GENERATOR TRANSFORMER BACK UP EARTH FAULT PROTECTION (51N)
This is a simple inverse type over current relay connected to the neutral CT of
transformer. This relay provided back up function for fault both internal and external to
the transformer, This protection energizes Class-A trip.
Question and answers Electrical Maintenance Unit
- 255 -
f) OVER LOAD MONITORING (49)
Measuring oil temperature and winding temperature indirectly monitors the loading of the
generator transformer. The oil and winding temperature indicators are provided with
contacts for initiating alarms as a first stage and tripping as the second stage whenever the
oil and winding temperature limits are exceeded. The oil temperature /winding
temperature trips are routed through Class-C trip.
g) GAS PROTECTION (63)
A Buchholz relay is supplied along with the transformer. The relay has two contacts one
closes on slow gas formation and initiate alarm. The second contact closes of sudden
surge of oil flow in case of severe internal fault and this contact is wired for tripping the
unit in Class-A trip.
The relay consists of two float switches contained in a closed housing, which is located in
the pipe from transformer to conservator tank. Any internal fault in the transformer
comes, the oil decomposes and the generating gases which passes up the pipe towards the
conservator and is trapped in the relay. In this two float relay the top float responds the
slow accumulation of gas due to mild and incipient fault, the lower float being deflected
by the oil surges caused by a major fault. The float control contacts, in the first stage give
an alarm and second case to isolate the transformer.
Question and answers Electrical Maintenance Unit
- 256 -
• What are the set values of generator protection?
TYPE OF PROTECTION AND ITS SET VALUES
No. Type of Protection Set Values CT/PT Ratio Time Delay Class
1. Generator differential 0.5A(10%) 10000/5 Inst. Class-A1
2. Generator Inter turn 0.5A(10%) 5000/5 Inst. Class-A1
3 Generator reverse power 0.5% 10000/5 5 sec Class-A1
(stage 2 Tx trip)
4. 100% Stator Earth Fault ND = 5V(3r
harmonic 70
100%)
16.5 kV/110V 1.0 sec Class-A1
5. 2nd Rotor Earth Fault 1.0 mA --- --- Class-A1
6. Over Frequency 51.5 Hz 16.5 kV/110V 0.1 sec 86 BG
7. Over Voltage 120% 16.5 kV/110V 2.0 sec Class-A
8. Overall Differential 1.0A 10000/5A Inst. Class-A1
9. GT Restricted E/F 0.1A 800/1A Inst. Class-A1
10. GT Gas Protection --- ---- Inst. Class-A1
11. GT Fire --- --- Inst. Class-A1
12. GT Over Current PSM-1.0
Inst. – 8.0
800/1 A TMS=0.4 Class-A1
13. GT Earth Fault PSM-0.2
TMS-0.52
800/1A 2.0 sec Class-A1
14. Impedance Protection
Stage-1
--- 10000/5A 2.0 sec Class-A2
15. Generator Over Current
During Starting
50 mA 10000/5A Inst. Class-A2
16. Generator Back-up Earth
Fault
PSM-5.4V 16.5 kV/110V TMS =0.3 Class-A2
17. Stator Earth Fault During Starting 100 mA 300/1A Inst. Class-A2
18. Low Forward Power 0.5% of FP 10000/5A 2.5 sec Class-B1
19. GT Over Fluxing Stage-1 120% --- 2 min Class-B
20. GT Over Fluxing Stage-2 135% --- 1 min Class-B
21. Negative Sequence 5% 10000/5A Inverse Class-B
22. Field Failure --- 10000/5A Inverse Class-A2
23. Under Frequency 47.77 Hz 16.5 kV/110V 4 sec Class-C
24. GT Winding Temp. High 130O C --- --- Class-C
25. GT Oil Temp. High 90O C --- --- Class-C
• What is arc and what is spark?
Spark - the heat produced that ignites, due to the rubbing of two metals is called the
spark.
Question and answers Electrical Maintenance Unit
- 257 -
Arc – the electrical discharge between two electrodes is called the arc. Arc is the
self-sustained discharge of electricity between electrodes in a gas or vapour, which
has a high voltage discharge at the cathode.
Question and answers Electrical Maintenance Unit
- 258 -
• What precautions should be taken while meggering main generator?
All PT’s are racked out.
Earthing transformer grounding terminals disconnected.
Barring gear shall be kept off.
Stator water shall be drained fully and hot air blown through conductors.
Generator flexible lines shall be disconnected to isolate GT/UT.
• What is the speed equation for AC machine?
N = 120 f / P
N – Speed in RPM
f - Frequency in Hz
P – Number of poles
• What is emf equation of alternator?
Emf = 4.44 kc kd f ∅ T volts.
Kd = Distribution factor = sin m β/2
m sin β/2
kc/kp = Coil span factor /Pitch factor = cos α/2
kf = Form factor = 1.11
∴Average emf induced / Cycle = ∅ N P/ 60
= ∅ P ∗120 f
60 * P
=2 f ∅ volt
If Z is the number of conductors = 2T (T = two sides of conductor)
emf induced = 2 f ∅ Z =2 f ∅ 2T = 4 f ∅ T
∴ RMS value of emf induced = form factor * emf
= 1.11 * 4 f ∅ T
= 4.44 f ∅ T volts.
• What is the emf equation for DC generator?
P * ∅ * Z * N
60 * A
A = number of parallel paths. That is for lap winding it is equal to Z and for wave
winding it equal to 2.
• What are the factors, which varies terminal voltage of generator?
a) Voltage drop due to resistance (Ra drop). This is negligible.
b) Voltage drops due to leakage reactance (XL).
c) Voltage drops due to armature reaction.
Question and answers Electrical Maintenance Unit
- 259 -
• What is meant by Armature reaction?
The effect of armature flux on the main field flux is called Armature reaction, where
armature flux weakens the main field flux. In Alternator power factor contributes
more importance in Armature reaction.
a) In Unity power factor field strength is average and effect is distortional. So
voltage variation will not be too much.
b) In lagging power factor armature flux is directly opposite to the main field flux.
That is armature flux is lagging 90ο by main field flux. So the result is
demagnetizing the field. Due to less field flux less voltage at the alternator
terminals and excitation required is more.
c) In leading power factor armature flux is leading by 90ο to the main field flux. The
result is additive and main field strength is more and excitation has to be reduced.
Otherwise end parts or overhang portion of the generator will heat.
• What is meant by voltage regulation?
If there is a change in load, there is a change in terminal voltage. This change not
only depends upon the load but also on power factor. The voltage regulation is
termed as the rise in voltage when full load is removed divided by rated terminal
voltage (Excitation and speed remains constant).
∴ Regulation in % = E0 – V
V
In case of leading power factor terminal voltage will fall and regulation is negative.
PF leading
Terminal
Voltage PF unity
PF lagging
Load current
Generator voltage characteristics
• Why double squirrel cage motor used in barring gear? Why?
To have high starting torque.
In AC motors torque is directly proportional to φ (flux), I2 and cosφ2.
i.e T ;φ (flux* I2 * cos φ2.
∴ T = k * φ (flux)* I2 * cos φ2.
Rotor at standstill E2;φ (flux)
∴ T = k * E2 * I2 * cos φ2.
Question and answers Electrical Maintenance Unit
- 260 -
In double squirrel cage motor inner cage is low resistive and high inductive. The
outer cage is high resistive and low inductive. In case of inner cage Z (impedance) is
less (XL = 2􀀟 f L). If the rotor is having high inductance at starting I2 will lag E2 by
large and cos φ2 (Rotor PF = R2 / Z2) is very less. So torque
is less.
At staring rotor torque is proportional to the rotor
resistance. At starting inductance is high and the Z is--
--------
Question and answers Electrical Maintenance Unit
- 261 -
• What are the logics adopted to close the field breaker?
a) Turbine speed 2880 rpm.
b) Class A, B and BG trip reset.
c) Auto/manual reference minimum.
d) Auto/manual channels supply normal.
e) FB closing circuit healthy.
• What you mean by positive sequence, negative sequence and zero sequence of
voltage?
Positive phase sequence
A system of vectors is said to have positive sequence if they are all of equal
magnitude and are displaced by 120° with same time interval to arrive at fixed axis
of reference as that of generated voltage. The positive phase sequence is represented
below and the vectors arrive along X-axis in order 1, 2, 3 and conscript P has been
used to designate as positive sequence.
E3P
Anti clock direction
120°
E3P
E3P
Negative phase sequence
A system of vectors is said to have a negative phase sequence if they are of equal
magnitude displaced at an angle of 120° but arrive at the axis of reference at the
regular interval same as that of positive phase sequence but in order of 1, 3, 2. That
is the order is reversed.
E3N
Clock direction
120°
E3N
E3N
Zero sequence
A system of vectors in a phase system is said to have zero phase sequence if all the
three vectors are not displaced from each other and there will be no phase sequence
Question and answers Electrical Maintenance Unit
- 262 -
in such cases. The current or voltages in the 3-phase circuit vary simultaneously in
all the 3- phases. Such phase sequence is zero phase sequence.
E1O
E2O
E3O
Question and answers Electrical Maintenance Unit
- 263 -
• What is rotor and stator resistance values?
Rotor resistance = 98.1 m􀀍
Stator winding resistance’s
R φ = 3.1􀀍/3.1􀀍
Y φ = 3.1􀀍/3.1􀀍
B φ = 3.1􀀍/3.1􀀍
• What is the rating of generator PT fuse?
24 kV, 3.15 Amps.
• What is the wearing rate of generator Slipring?
Generator Slipring wearing rate is 0.025 mm /1000 hrs.
• What is the brush pressure on Slipring?
Recommended brush pressure in the Slipring is 150 to 200 gms/cm2 (0.9 to 1 kg).
• What are the properties of hydrogen and DM water?
Hydrogen
a. Windage losses are less. Hence efficiency increased.
b. Heat transfer is more. Hence output per volume is increased.
c. No corona discharge, which makes insulation life long.
d. Lesser denser and penetration and cooling more.
e. No fire risk at purity 4% to 74%.
DM Water
a. Non toxic and low viscosity.
b. High thermal conductivity.
c. Low conductivity.
d. Freedom from fire risk.
e. External heat exchanger used.
• What are the chemical tests on hydrogen and DM water?
Hydrogen
a) Hydrogen purity in % (volume/volume).
b) Relative humidity in % (30% is nominal).
DM water
a) PH of DM water (less than 6.5 is acidic and more than 7 is alkaline where oxygen
is not forming). PH is also called IP (isotopic purity).
b) Conductivity.
c) Copper traces.
d) Dissolved oxygen (to trace corrosion and 1.2% is more).
Question and answers Electrical Maintenance Unit
- 264 -
Question and answers Electrical Maintenance Unit
- 265 -
• What are the logic’s adopted in barring gear motor?
For start permission
a) Local or remote start.
b) JOP is running.
c) Motor hand barring is permissive.
d) 42 contactor in MCC is off.
e) Turbine speed is <100 rpm.
Start permission (42S of MCC)
a) All above
b) Bearing oil pressure is >0.35 kg/ cm2.
c) No thermal over load of 42S.
d) No one-DG condition.
Start permission (42 of MCC)
a) Start permissive of 42S.
b) Barring gear engage or motor speed reached to 1475 rpm.
c) Turbine speed is <100 rpm.
d) Bearing oil pressure is >0.35 kg/ cm2.
e) No thermal over load of 42.
f) No one-DG condition.
• What is the equation for resistance measurement of PT 100 thermocouple?
°C = (R-100) / 0.39
• What are the requirements for synchronization and setting for generator?
a) Same phase sequence.
b) Voltage should in-phase and angle should not be more than 10°.
c) Voltage value must be same and difference of 5% is allowed.
d) Frequency should be same and difference of 0.1% i.e. 0.05 Hz is allowed.
• What is the recommended IR value for generator?
Main generator is class B insulated machine. Without stator water recommended
insulation value for the generator is R60 = kV + 1 MΩ
R60 – minimum recommended IR in MΩ of entire winding at 40°C of 60 Sec.
kV – rated voltage.
For the IR measurement 1 kV megger should be used.
• What is the type turbine installed in KGS?
Tandem compounded to expansion of steam, impulse reaction type.
• State HP & LP turbine steam values.
HP LP
Question and answers Electrical Maintenance Unit
- 266 -
Pressure Flow Temp Pressure Flow Temp
I/L 40 kg/cm2 1333 t/h 250°C I/L 5.664 kg/cm2 232.9°C
O/L 6.02 kg/cm2 O/L
Wetness (I/L) 0.26% Wetness (I/L)
Wetness (O/L) 11.058% Wetness (O/L)
Question and answers Electrical Maintenance Unit
- 267 -
• State turbine governor setting.
On 2560 rpm turbine governor becomes effective and on 2760 rpm is turbine
governor take over speed.
• What is requirement of speeder gear assembly?
To bring the turbine to synchronous speed and get tight lock with grid by grid
frequency. BPC signal is given in Auto mode to the speeder gear motor.
• What is the purpose of LLG?
To ensure that the turbine load never exceed the reactor output, to incorporate
turbine follow reactor feature governing system.
• What is the purpose of OSLG?
This gear mainly used to control the steam flow so as to limit the machine from over
speeding. On following occasions the over speed limiting gear acts.
a) When the flow of steam corresponds to load is 2/3 and
b) Electrical power on generator falls 1/3 of full load.
• What is the logic in lubrication oil pump system?
Normally main oil pump (MOP) will feed the required lub oil to turbine governor
and lubrication. If the pressure drops to 5.3 kg/cm2 6.6 kV 373 kW Aux. Oil Pump
will start. If further pressure falls to <0.65 kg/cm2 Flushing Oil Pump will start. If
further pressure drops <0.35 kg/cm2 Emergency Oil Pump will start.
Lubricating oil inlet temperature will be 40°C and outlet temperature will be 70°C.
• What is the purpose of TOPP (turbine oil purification plant)?
The purpose of TOPP is to remove the water ingress in turbine oil system from the
gland leaks, cooler leakage, and solid metal particles, which are produced due to rust,
wear of bearings and to normalize the low quality oil.
The remove capacity of TOPP is, for solids – 5 microns and for water – 300 to 500
parts per milli.
Question and answers Electrical Maintenance Unit
- 268 -
RELAYS
• Write down the relay numbers and their designation.
1 MASTER ELEMENT 51 AC TIME OVER CURRENT RELAY
2 TIME DELAY STARTING OR CLEARING 52 AC CIRCUIT BREAKER
3 CHECK OR INTERPOSING RELAY 53 EXCITER OR DC GENERATOR
4 MASTER CONTACTOR 54 SPARE
5 STOPPING DEVICE 55 POWER FACTOR RELAY
6 STARTING CIRCUIT BREAKER 56 FIELD APPLICATION RELAY
7 ANODE CIRCUIT BREAKER 57 SHORT CIRCUITING DEVICE
8 CONTROL POWER DISCONNECT DEVICE 58 RECTIFICATION FAILURE RELAY
9 REVERSING DEVICE 59 OVER VOLTAGE RELAY
10 UNIT SEQUENCE RELAY 60 VOLTAGE OR CURRENT BALANCE RELAY
11 SPARE 61 SPARE
12 OVER SPEED RELAY 62 TIME DELAY STOPPING OR OPENING DEVICE
13 SYNCHRONISING SPEED DEVICE 63 LIQUID OR GAS OR VACCUM RELAY
14 UNDER SPEED DEVICE 64 GROUND PROTECTION RELAY
15 SPEED OR FREQUENCY MATCHING DEVICE 65 GOVERNOR
16 SPARE 66 NOTCHING OR JOGGING RELAY
17 SHUNTING OR DISCHARGE SWITCH 67 AC DIRECTIONAL OVER CURRENT RELAY
18 ACCELERATING OR DE-ACCELERATING DEVICE 68 BLOCKING RELAY
19 STARTING OR RUNNING TRANSITION DEVICE 69 PERMISSIVE CONTACT DEVICE
20 ELECTRICALLY OPERATED VALVE 70 RHEOSTAT, ELECTRICALLY OPERATED
21 DISTANCE PROTECTION RELAY 71 LIQUID OR GAS LEVEL RELAY
22 EQUALIZER CIRCUIT BREAKER 72 DC CIRCUIT BREAKER
23 TEMPERATURE CONTROL DEVICE 73 LOAD RESISTOR CONTACTOR
24 SPARE 74 ALARM RELAY
25 SYNCHRONISING DEVICE 75 POSITION MECHANISM
26 APPARATUS THERMAL DEVICE 76 DC OVER CURRENT RELAY
27 UNDER VOLTAGE RELAY 77 PULSE TRANSMITTER
28 FLAME DETECTOR 78 PHASE ANGLE OR OUT OF STEP RELAY
29 ISOLATING CONTACTOR 79 AC RECLOSING RELAY
30 ANNUNCIATER RELAY 80 SUPPLY FAIL
31 SEPARATE EXCITATION DEVICE 81 FREQUENCY RELAY
32 DIRECTIONAL POWER RELAY 82 DC RECLOSING RELAY
33 POSITION SWITCH 83 AUTOMATIC SELECTION
34 MASTER SEQUENCE DEVICE 84 OPERATING MECHANISM
35 SLIP RING SHORT CIRCUIT DEVICE 85 CARRIER OR PILOT WIRE RECEIVER RELAY
36 POLARITY OR POLARIZING VOLTAGE DEVICE 86 LOCK OUT RELAY
37 UNDER CURRENT OR UNDER POWER RELAY 87 DIFFERENTIAL PROTECTION RELAY
38 BEARING PROTECTIVE DEVICE 88 AUXILIARY MOTOR OR MOTOR GENERATOR
39 MECHANICAL CONDITION MONITOR 89 LINE SWITCH
40 FIELD RELAY 90 REGULATING DEVICE
41 FIELD CIRCUIT BREAKER 91 VOLTAGE DIRECTIONAL RELAY
42 RUNNING CIRCUIT BREAKER 92 VOLTAGE & POWER DIRECTIONAL RELAY
43 MANUAL TRANSFER OR SELECTOR DEVICE 93 FIELD CHANGING RELAY
44 UNIT SEQUENCE STARTING RELAY 94 TRIPPING OR TRIP FREE RELAY
45 ATMOSPHERIC CONDITION MONITOR 95 SUPERVISION RELAY
46 CURRENT UNBALANCE RELAY 96 SPECIAL APPLICATION
47 POLE DISCREPANCY 97 FUSE FAIL RELAY
48 INCOMPLETE SEQUENCE RELAY 98 SPECIAL APPLICATION
49 THERMAL OVER LOAD RELAY 99 OVER FLUXING RELAY
50 INSTANTANEOUS OVER CURRENT RELAY 100 SPECIAL APPLICATION
Question and answers Electrical Maintenance Unit
- 269 -
General Description of Relays
NOMENCLATURE FOR ENGLISH ELECTRIC RELAY
FIRST LETTER – OPERATING QUANTITY
A PHASE ANGLE COMPARISON SECOND LETTER – MOVEMENT
B BALANCED CURRENT A ATTRACTED ARMATURE
C CURRENT B BUCHHOLZ
D DIFFERENTIAL C INDUCTION CUP
E DIRECTION D INDUCTION DISC
F FREQUENCY G GALVANOMETER (MOVING COIL)
I DIRECTIONAL CURRENT T TRANSISTOR
K RATE OF RISE OF CURRENT
N MANUAL
O OIL PRESSURE
P POLY PHASE VA
R REACTIVE VA
S SLIP FREQUENCY
T TEMPERATURE
V POTENTIAL
W WATTS (POWER)
Y ADMITTANCE
Z IMPEDANCE
THIRD LETTER – APPLICATION
A AUXILIARY R RE CLOSING
B TESTING S SYNCHRONISING
C CARRIER (COUNTING) T TIMER OR TRANSFORMER
D DIRECTIONAL U DEFINITE TIME
E EARTH (GROUND) V VOLTAGE TIME
F FLAG & ALARM INDICATOR W PILOT WIRE
G GENERAL OR GENERATOR WA INTERPOSING
H HARMONIC RESTRAINT WJ INTER TRIPPING
I INTERLOCK OR INDUSTRIAL X SUPERVISORY
J TRIPPING Y FLASH BACK (BACK FIRE)
JE TRIPPING (ELECT. RESET) Z SPECIAL APPLICATION
JH TRIPPING (HAND RESET) ZS ZERO SEQUENCE
JS TRIPPING (SELF RESET)
JC CONTROL
K CHECK ALARM
L LIMITING
M SEMAPHORE OR MOTOR
N NEGATIVE SEQUENCE
O OUT OF STEP
P POTENTIAL FAILURE
Q ALARM
FOURTH LETTER
M – SPECIAL VARIATION
Sl. No. E E Relay Application
1 CTM Motor protection
2 CTU Locked rotor. Thermal alarm
3 CDG I.D.M.T. over current or earth fault of transformer
4 CAG Instantaneous over current or earth faults.
Question and answers Electrical Maintenance Unit
- 270 -
5 VAGM Under voltage
6 WDG Under /Over power for DG set
7 FTG Under frequency
8 VAPM Fuse failure
Question and answers Electrical Maintenance Unit
- 271 -
• What is Knee point voltage?
EMF applied to secondary of current transformer (CT) which, when increased by
10% voltage causes the excitation current to increase by 50%.
• What is I.D.M.T?
Inverse time relay with definite minimum time is called IDMT.
• What is Negative sequence reactance?
Negative sequence can arise whenever there is any unbalance present in the system.
Their effect is to setup a field rotating in opposite direction to the main field.
• What is Zero sequence reactance?
If a machine is operating with an earthed neutral, a system earth fault will give rise to
zero sequence current in the machine.
• Purpose of over current relay (Inverse); type- CDG
It is a self powered inverse time over current and earth fault relay, used for selective
phase and earth fault protection in time graded systems for A.C. machines,
transformers, feeders etc. A non-directional heavily damped induction disc relay,
which has an adjustable inverse time/current characteristic with a definite minimum
time. The relay has a high torque movement combined with low burden and low
overshoot. The relay disc is so shaped that as it rotates the driving torque increases
and offsets the changing restraining torque of the control spring.
• Purpose of Directional inverse Over current & earth fault relay; type- CDD
Directional phase or earth fault protection of ring-mains, parallel transformers,
transformer feeders, parallel feeders etc., employing the time graded principle.; This
relay comprises an inductive disc over current unit with wound shading coils and a
directional high speed induction cup unit. The cup-unit contact is wired across the
shading coils so that no torque is exerted on the disc of the over current unit until the
cup unit contact closes. The inductive disc unit is thus directionally controlled and it
operates only when the current flows in the tripping direction. The directional unit is
a high speed, low inertia four pole induction cup movement designed to give a high,
steady and non-vibrating torque. its current coil is connected in series with the
operating coil of the induction disc unit. The directional unit is normally provided
with voltage polarising coils.
• Purpose of Over current & earth fault relay; type- CAG
This relays are designed for instantaneous phase or earth fault protection and
instantaneous high set over current protection.; A standard hinged-armature unit
forms the basic movement for this relay. It consists an operating coil mounted on a
cylindrical iron core bolted to a frame at one end. This frame extends along the side
Question and answers Electrical Maintenance Unit
- 272 -
of the coil, with its end forming a knife-edge on which the armature is pivotally
mounted. The armature is 'L' shaped and pivoted at its corner so that one arm can be
attracted to the end of the core while the other arm to operate a set of contacts.
Question and answers Electrical Maintenance Unit
- 273 -
• Purpose of Local breaker back-up relay; type -CTIG
To safe guard against the drastic consequences of failure to clear faults rapidly, many
power supply authorities install 2 independent systems of protection for major
transmission lines. There remains however the possibility of the circuit breaker itself
failing to operate and this hazard is traditionally covered by remote breaker back-up.;
CTIG relay is a 3 phase or 2 phase and earth fault instantaneous over current unit
intended for use with a time delay to give back-up protection in the event of a circuit
breaker failure. A particular feature of the CTIG relay is a fast reset, which enables
the time delay to be set closer to the breaker trip-time.
• Purpose of Battery earth fault relay; type- CAEM-21
The battery earth fault relay is used to detect earth faults and deterioration of wiring
insulation in either pole of battery. The scheme consists of a centre tapped resistor, a
measuring relay, plug setting bridge, auxiliary relay and rectifier bridge to provide
unidirectional supply to the measuring relay coil. For different battery voltages
different values of centre tapped resistors are used. Variable sensitivities are
provided by means of the tapped coil whose taps are connected to the plug setting
bridge. The centre tap of resistor is brought to one terminals of the relay and this
terminal is either directly earthed or earthed through a centre zero milli
ammeter. Under healthy condition no current flows through the measuring relay coil
and in any pole of the battery or wiring insulation failure, current flows through the
measuring relay coil and the relay operates.
• Purpose of Rotor earth fault relay (type- CAEM-33)
When a single E/F is detected in the DC field circuit of a machine, the machine has
to be taken out of service at the first opportunity. This is because, if allowed to run
with an E/F on the rotor, a subsequent second E/F can cause severe damage to the
machine. However, a relay like CAEM-33 which can detect such a second E/F and
trip out the machine can make it possible to run the machine even with a single E/F,
without any such risks, thus helping to preserve the generation capacity. The start of
the second rotor earth fault detection scheme is a very sensitivity transductor
element. The AC winding of the transductor is connected in series with a rectified
AC voltage relay. The Dc winding of the transductor on the other hand is connected
in series with the rotor E/F circuit. Under normal conditions- i.e. with no DC
flowing, the AC wining of the transductor presents a high impedance, and the AC
voltage applied is mostly dropped across this winding. Hence the relay remains deenergised.
When a second rotor E/F occurs, a DC current flows through the
transductor dc winding which causes the impedance of the AC winding to reduce
considerably by driving the transductor core into saturation. Hence, the applied
voltage is fully available across the relay and it operates.
Question and answers Electrical Maintenance Unit
- 274 -
• Purpose of Sensitive earth fault relay (type - CTUM-15 & CTIGM-15
It may not be always possible to detect high resistance faults by convectional earth
fault relaying. In such cases a very sensitive current relay will be required for this
purpose. It can be connected residually since it has an adjustable definite time delay
provided to take care of transient spills in the residual circuit due to CT mismatch.
Also, its low burden enables it to be used with existing CT's/ Relays without
affecting the performance.; The incoming current is stepped down by an internal
current transformer and converted to a voltage by a variable resistor network. The
signal is compared with an internal reference. When this reference level is exceeded,
a time delay is initiated, after the time delay has elapsed, a relay operates.
• Purpose of Negative phase sequence current relay; Type- CTN/CTNM
Negative phase sequence current in the stator of a generator, caused due to
unbalanced loads or faults, it induces double frequency eddy current in the rotor.
These currents, if allowed to persist, can cause serious overheating and the purpose
of this relay is to disconnect the machine before such excess temperature is reached.
The inputs from the current transformers, which are connected in each phase of the
generator supply, are fed to a negative sequence filter which gives an AC output
voltage proportional to the negative sequence current. This voltage is rectified and
smoothed and fed into the squaring circuit of the main measuring element, the
definite time delay circuit and the alarm element. The output from the squaring
circuit is proportional to the square of the input voltage and is applied directly to the
main timing circuit to give the required relationship between I2
2t and the relay
operates time t.
• Purpose of definite time Over current & earth fault relay: Type-CTU
This relay can be used for definite time over current protection against phase and
Earth faults on medium and low voltage distribution systems. The definite time relay
offers a considerable advantage over inverse time relays in instances where there ia a
wide variation in line impedance. Another application is in the field of stalling
protection of motors. When the thermal overload relay does not provide protection
against stalling, separate definite time O/C relay type CTU can be used to provide
the same. This relay comes in following nomenclature: CTU-12/22/32/52/62/15.
CTU relay combines the advantage of complete static measurements with
characteristic of the robust, well proved attracted armature unit. These relays
measure current and time accurately, imposes low burden on CT's. Each phase
comprises a static overload detector and timer, which is accurate over a 10:1 time
setting range. When the positive peak of the input signal exceeds the reference level,
the time delay circuit starts and after a preset time, drives the output relay.
Instantaneous high set unit when fitted uses alternate half cycle for measurement and
through a separate level detector drives a separate output relay.
Question and answers Electrical Maintenance Unit
- 275 -
• Purpose of Motor protection relay: Type- CTMM/CTMFM
This relay contains all the protection factors to protect the motor, from Thermal
overload (Ith), Instantaneous over current (I1), Instantaneous or time delayed
unbalance element, Earth fault Element (I0) & Stalling protection (I1(t))
Question and answers Electrical Maintenance Unit
- 276 -
• Purpose of Overfluxing Relay: Type-GTTM
Transformers need protection against the risk of damage, which may be caused when
the transformers are operated at flux density levels significantly greater than the
design values. The overfluxing withstand time is generally found to be varying
inversely with the working flux density in the core, having higher withstand times
during extreme overfluxing conditions.
The overfluxing condition can occur during system over voltage or under frequency
conditions.
The basic operating principle is to produce an ac voltage, which depends upon the
ratio between AC input voltage and the frequency. The AC input voltage is fed to a
step-down transformer, which also provides isolation and the stepped down voltage
is fed to a V/F ratio detector circuit. This circuit is a simple operational amplifier
integrator with the provision for V/F pickup adjustment. The AC voltage is rectified
by true RMS. to dc converter. This circuit gives a frequency output and this
frequency increases rapidly with the increase in voltage. The frequency output is
given to a curve shaping circuit, which involves counter and comparators. The
counter counts the frequency output and the number of counts required for final trip
condition is changed by the comparator circuits to get the required timing
characteristic.
• Purpose of Biased Differential Relay: Type-MBCH
This relay is suitable for protection of two or three winding power transformers, auto
transformers or generators transformer units.
The differential transformer protection measuring circuit is based on the well-known
Merz-price circulating principle.
• Purpose of Digital frequency relay: Type-MFVUM
This relay is used to monitor the frequency of an electrical system. The relay are
suitable for any application in industrial plants and to generators where definite time
under or over frequency protection is required.
The operating principle of the relay is the comparison of the time interval of the
incoming frequency with that of a preset time derived from an accurate oscillator
within the relay. The incoming frequency signal is connected to an INPUT
CIRCUIT, which then drives an IMPULSE GENERATOR to produce a pulse at the
beginning of each period of the input voltage. The preset time interval is obtained
from an OSCILLATOR and COUNTER and adjustment is achieved using
SELECTOR switches, which drive a DECODER circuit. A COMPARATOR
compares the two-time interval and this triggers an adjustable TIMER which then
operates the output relay and latched light emitting diode (LED) glows.
• Purpose of Stator Earthfault Relay: Type-PVMM
Question and answers Electrical Maintenance Unit
- 277 -
A 100% stator earthfault protection is designed to detect earthfault occurring in the
regions of machine winding close to the neutral end. This relay is a composite
modular relay that gives 100% stator earthfault protection for machines, whose
neutral are not directly earthed. It works on the principle involving monitoring of the
neutral side and line-side components of the third harmonic voltages produced by
AC generators in service.
Question and answers Electrical Maintenance Unit
- 278 -
• Purpose of Voltage regulating relay and line drop compensator: Type-VTJCM & CIJC.
This relay is used with on load transformer tap changers and induction regulators to
provide close and accurate automatic voltage regulation on power systems of any
voltage.
When the regulated voltage moves outside a dead band, set by the sensitivity control,
the volts high or volts low circuits are initiated and after a time delay, determined by
the response characteristic, the appropriate tap changer control auxiliary relay closes
its contact to initiate a tap change.
• Purpose of Directional power relay: Type-MWTU.
This relay setting ranges from 0.25% to 18.56% of rated power. This makes the relay
suitable for sensitive reverse power applications. For example with turbo-generator,
where the detection of 1% or 2% reverse power is necessary to prevent the
synchronous machine from motoring in the event of the power from the prime mover
becoming too low. It is also suitable for low forward power interlock and under
power protection.
• Purpose of Check synchronising relay: Type-SKD/SKE.
This relay is used to prevent interconnection of badly synchronised supplies. Type
SKD relay are used for auto reclosing sequence, type SKE relay are used to
safeguard manual synchronising of generators. Phase measurement is achieved by
algebraically subtracting the 2 supply voltage waveforms and comparing the
resultant modulated beat waveform envelope with a Dc reference voltage. The DC
reference is proportional to the sum of the peaks of the 2 supply voltages to provide
phase measurement independent of supply voltage variation.
• Purpose of Static distance protection: Type-SHPM.
This relay (QUADRAMHO) is a static distance protection relay specially designed
for comprehensive high-speed protection of HV & EHV distribution/transmission
lines. 3 zones of protection are included, each employing separate measuring
elements, one element each for 3 phase-to-phase and 3 phase-to-earth faults. Thus a
total; of 18 elements are provided thereby increasing the reliability of the protection.
Poly phase measuring elements are not used in QUADRAMHO as in some of the
contemporary schemes. The relay is suitable for both three poles & single-and-threepole
tripping of the circuit breaker.
• Purpose of Static offset MHO relay: Type- YTGM.
This relay is a static single phase, single step, and distance protection with MHO
offset MHO characteristic. With suitable current/voltage input selection, the relay
can be made to have the required characteristic in the R-X plane for various
applications such as Generator Field failure protection, Generator backup impedance
Question and answers Electrical Maintenance Unit
- 279 -
protection and as offset MHO relay for use in conjunction with generator pole
slipping protection.
Question and answers Electrical Maintenance Unit
- 280 -
• Purpose of sensitive power relay: Type-WCD.
This power relay is a sensitive Poly phase induction cup unit, providing under power,
reverse power and over power protection. This relay detects a reversal of current
flow, caused by insufficient driving power from the prime mover, preventing the
generator operating as a synchronous motor. The electrical quantities energize
windings on an eight pole laminated stator. The moving contact is operated by a cup
shaped Aluminium rotor, which turns on jewelled bearings in an air gap between the
stator and a fixed center core. Only a small arc of rotation is needed to cause contact
closer. Low rotor inertia and very high driving torque ensures a high speed
operations.
• Purpose of pole slipping relay: Type-ZTO.
This pole slipping relay has been designed to protect synchronous Generators against
the possibility of the machine running in the unstable region of the power angle
curve which would result in power oscillations and pole slip. The relay consists
basically of one directional relay and one blinder relay operating in conjunction with
a 40-80 milli seconds static timer. Intended primarily for installation between the
generator and associated transformer (preferably on the generator terminals)
• Purpose of fuse failure relay: Type - VAPM
This relay detects a failure or inadvertent removal of voltage transformer secondary
fuses and prevention of incorrect tripping of circuit breakers. This relay consists of a
rectified AC voltage operated hinged armature unit. Three coils for the three phases
are wound over a single core producing in effect a common relay for the three
phases. Each coil is connected across one of the voltage transformer secondary fuses
and under healthy conditions, this coil is short circuited by the fuse and cannot be
energized. When one or more fuses or are removed the appropriate coil(s) is
energized under relay operates immediately to open the trip circuit.
Question and answers Electrical Maintenance Unit
- 281 -
GENERATOR PROTECTION
Sl Des Description CT ratio Type Setting Remarks
1 87G Generator Differential
Protection
10000/5 CAG-34 P/S = 10% or 0.5 A SR = 143 Ohm
2 87GI Generator Inter Turn fault 5000/5 CAG-34 P/S = 10% or 0.5 A SR = 86.72
Ohm
3 32A Low Forward Power
Protection
10000/5 WCD-13 0.5% Fixed
2/32A Timer VTT-11 2.5 Sec
4 32B Low Forward Power Protection 10000/5 WCD-13 0.5% Fixed
2/32B Timer VTT-11 2.5 ec
5 32C Under Power Over speed limit 10000/5 WCD-12 30% Fixed
27 A,B Under Voltage Relay VAGM-22 73.2 V
6 37 Reverse Power Protection 10000/5 WCD-11 0.5% Fixed
2A/37 Timer VTT-11 10 Sec
2B/37 Timer VTT-11 5 Sec
7 21G1 Generator Back-up
Impdence Stage-1
10000/5 YTGM-15 K1=7.0, K2=1.0, K3=2.0,
K4=1.0, K5=1.0, K10= 0
Zf=14.0 Ohm, Zr= NA
2/21G Timer VTT-11 1.5 Sec
8 21G2 Generator Back-up Impdence
Stage-2
10000/5 YTGM-15 K1=1.65, K2=1.0, K3=2.0,
K4=1.0, K5=5, K10= -1
Zf=3.3 Ohm, Zr=10 Ohm
2/21G2 Timer VTT-11 2.0 Sec
9 40G Generator field failure 10000/5 YTGM-15 K1=6.175, K2=1.0, K3=4.0,
K4=1.0, K5=1.06, K10=+1
Zf=24.7.0 Ohm, Zr= 4.24
2A/40G Timer (TDDO) VTT-11 2.5 Sec
2B/40G Timer VTT-11 2.0 Sec
27/40G Under Voltage Relay VAGM-22 73.2 V
10 59G Over voltage Protection VTU - 21 Setting=120% + 2.0 Sec
11 78GY YTGM With pole slipping relay YTGM-15 K1=4.45, K2=1.0, K3=1.0,
10000/5 K4=1.0, K5=5, K10= -1
Zf=4.45 Ohm, Zr=5.0 Ohm
12 78G Pole Slipping Protection ZTO K1=0.98, K2=0.67, K3=4.0
10000/5 Q1=Q2=75 degree,
Timmer =54mSec
Over current Starter CAG-19 Current Setting=5.5A
13 64A 100% Stator E/F Protection PVMM-163 Vs=5.0 V, N=3
Neutral Displacement Module
Third harmonic Module VRL=70% Time=1.0 Sec
Third harmonic comporator unit This is to be set during
commissioning by Alstom engineer
14 64B 95% E/F Protection VDG-14 PSM=5.4 V, TMS=0.3
15 64C Stator E/F during Starting 300/1 CTIGM-15 Setting = 0.1 A
16 46G Gen. Negative phase sequence 10000/5 CTNM-31 I2S=5%, K1=6.7, K3= 1
Alarm=70%
2/46G Timer VTT-11 120.0 Sec
17 50 ABC Instantenuous Over current 10000/5 CAG-39 P/S = 5 A
18 49 G Generator Over load protn. 10000/5 CTMM - 104 Ith=4.4A, Thermal Ref. Curve=2a
19 50 S
ABC
Stator O/C Protn during starting 10000/5 CTIGM-15 Setting = 0.05 A
20 64 F1 First rotor E/F protection VAEM - 21 Setting = 1.1 mA fixed
21 2/64F1 Timer VTT-11 Setting = 2.0 Sec
Question and answers Electrical Maintenance Unit
- 282 -
22 64F2 Second rotor E/F Protection CAEM-33 Setting = 1.0 mA fixed
23 81 - 1 81-1RL1 Under Frequency Stage - 1 MFVUM Setting = 47.96 Hz + 1.1 Sec Window annun
81-1RL2 Under Frequency Stage - 2 Setting = U#1=47.6 Hz
+2Sec,U#2=47.7Hz+3 Sec
SUT breaker trip
Setting = U#1=47.6 Hz +4
Sec,U#2=47.7Hz+ 4sec Sec
86C Operation
24 81 - 2 81-2RL1 Under Frequency Stage - 3 MFVUM Setting = 47.5Hz +0.1Sec SUT breaker trip
Setting = 47.5Hz +0.6 Sec 86C Operation
25 81 - 3 81-3RL1 Over Frequency Stage - 1 MFVUM Setting = 51.0 Hz + 1.1 Sec Window annun
81-3RL2 Over Frequency Stage - 2 Setting = U#1=51.5 Hz + 15
Sec,U#2=51.65 Hz + 15 Sec
86BG Operation
26 81 – 4 Rate of rise of frequency (
df/dt)
MICOM Setting = 50.01+2.0Hz/Sec + 0.2Sec SUT breaker trip
Setting = 50.01+2.0Hz/Sec + 0.5Sec 86C Operation
Over Frequency ( f+t) Setting = 51.5 Hz + 0.2 Sec SUT breaker trip
Setting = 51.5 Hz + 0.5 Sec 86C Operation
GENERATOR TRANSFORMER PROTECTION
Sl Designation Description Type Setting
1 87GT Over all Differential
Protection
MBCH-13 Settings = 20%
2 50/51GT Back-up O/C HV side CDG-63 PSM=1.0, TMS=0.4, Inst = 800%
3 50Z GT Breaker L.B.B. Protn. CTIG-39 Setting = 5%
2/50Z Timer VTT-11 Setting = 250 mSec
4 64GT G.T. H.V. REF CAG-14 Setting = 0.1 A, SR=185 Ohms
5 51 NGT G.T. B/U E/F Protn. CDG-11 PSM=0.2, TMS=0.52
2/51NGT Timer VTT-11 Setting = 1.0 Sec
6 30 FG WTI Alarm WTI Set 90 degree C alarm
7 30EG WTI Trip WTI Set 100 degree C trip
8 30 HG OTI Alarm OTI Set 70 degree C Alarm
9 30GG OTI Trip OTI Set 80 degree C Alarm
10 99G1 GT Over flux Stage-1 GTTM-22 Setting K1=1.1, K2=1.3
2/G1A Timer VTT-11 Setting = 10.0 Sec
11 99G2 GT Over flux Stage-2 GTT-21 Setting V/F=1.15, 99G2A=1.0Sec
99G2T=120 Sec
2/G2A Timer VTT-11 Setting=10.0 Sec
UNIT AUXILIARY TRANSFORMER PROTECTION
Sl.
No
.
Designation Description Relay Type Settings
1 87 UAT UAT Differential Protection MBCH-13 Setting=20%
2 64UAT A /
64UAT B
UAT REF Protection FAC-14 Setting=125 V
3 50/51 UT UAT B/U O/C Protection CDG-63 PSM=1.0, TMS= 0.32, Inst= 600%
4 51SN1/51SN2 B/U E/F UAT LV-A CDG-11 PSM=0.2, TMS= 0.44.
6 WTI Set 88 degree C alarm
7 WTI Trip WTI Set 93 degree C Trip
8 OTI Alarm OTI Set 80 degree C Alarm
9 OTI Trip OTI Set 90 degree C Trip
10 AVR Automatic Voltage Regulator VTJCM-13 1. Regulated voltage=110 V
2. Sensitivity: Dead band=+/- 2.5%
3. Selected Characteristics "c"
11 50 RYB OLTC O/C Protection CAG-39 95% I.e., 0.95A
Question and answers Electrical Maintenance Unit
- 283 -
START-UP TRANSFORMER PROTECTION
Sl.
No.
Designation Description Relay Type Settings
1 87 SUT ABC Differential Protection MBCH-13 Setting = 20%
2 64 HV REF Protn. HV Side FAC-14 Setting = 25V
3 64LVA/LVB REF Protn. LV Sides FAC-14 Setting = 125 V
4 67 ABC Directional O/C Protection CDD-41 PSM=0.75, TMS=0.4, Inst=600%
5 67 N Directional E/F Protection CDD-41 PSM=0.2, TMS=0.4, Inst=200%
6 99SUT Over fluxing Protection GTTM-22 Settings K1=1.1, K2=1.23
7 51SNA/51SNB LV Side B/U E/F Protn. CDG-11 PSM=0.2, TMS=0.4.
8 50Z Local Breaker B/U protn. CTIG-39 Setting=0.2A
2/50Z Timer VTT-11 Setting = 0.25 Sec
9 WTI Winging Temperature 95 degree C Alarm
105 degree C Trip
10 OTI Oil Temperature 85 degree C Alarm
95 degree C Trip
11 AVR Automatic Voltage
Regulator
EMCO EE-
301-M
1. Regulated Voltage = 110 V
2. Nominal Value = 110 V
3. L Setting = 2.75V (2.5%)
4. R Setting = 2.75 V (2.5%)
5. Time delay setting = 20 Sec
12 81-5 SUT Over Frequency Protn. MFVUM-22 52.0 Hz + 20.0 Sec
Question and answers Electrical Maintenance Unit
- 284 -
CT’s, PT’s and PROTECTION
• What is the inrush current peak of the transformer?
6 to 8 time that of full load current.
• Why REF is now is used for HV side also in GT/SUT?
The E/F setting of differential is poor.
• Why IDMT over current relay is always used as backup?
Because setting has to be 200% to emergency loading and TMS be large to grade
with feeder. Therefore very slow for internal faults/terminal faults/uncleared LV
faults.
• Purpose of standby E/F protection in SUT/UT?
Back up for LV winding, LV neutral CT- CDG 12 – resistance earthing – relay set
high time delay to discriminate with LV feeder and trip transformer if sustained E/F,
also protects neutral earthing resistor.
• Why do we use O/C & E/F protection on both sides of transformer?
Power in feed exists on both ends.
• Why in DG E/F protection, we do not open class IV CB’s or supply CB’s?
Delta of aux. Transformer prevents E/F currents from grid into DG neutral.
• Why 100% winding protection is felt essential for main generator stator E/F
protection? (Used in NAPS onwards?)
At MAPS 4% of winding is not protected. Earlier felt that the Electro magnetic stress
due high external fault currents near 4% of neutral may not be high to cause E/F
here. But now felt that the mechanical stress can leads to E/F.
• How 100% winding protection is given there?
a) Inject sub harmonic AC current into generator neutral. Monitor its amplitude. E/F
impedance reduces so current drawn increases and trips (Not used).
b) 3rd harmonic voltage monitored on neutral, fault near neutral upto 25% winding.
3rd harmonic voltage reduces to zero. Above this 3rd harmonic voltage increases,
so combined both 3rd harmonic and zero sequence relays for 100% covering, no
blind zone.
• What is the basic purpose of class-B protection?
Class-B avoids load rejection. For modern machines, the inertia is less and easily
gets damaged on overload. Therefore trip only for internal faults.
Low forward interlock prevents the risk of run away if a CIES valve fails to close.
Question and answers Electrical Maintenance Unit
- 285 -
Question and answers Electrical Maintenance Unit
- 286 -
• What are the effects of GT over fluxing?
a. Eddy current circulation.
b. Magnetising current increases
c. Winding temp increases
d. Transformer noise/vibration increases.
e. Over heating of non laminated metal parts (affected by stray fluxes)
• Why stabilising resistor in REF or residual E/F scheme?
Required against CT saturation under heavy through fault currents.
• Why in transformer the LV CB also be tripped along with HV CB for a primary side
fault?
Auxiliary transformer 415v delta star transformer, if HV CB alone tripped then back
feeding from LV side (say DG runs parallel with transformer)—arcing voltage at the
fault on primary—fault fed for more time – more damage.
• Why high impedance circulating current differential?
Under through faults, CT’s of different phases saturates differently. Net spill current
will operate low impedance CAG relay, so high impedance scheme with CAG
relay and stabilising resistor used.
• How to reduce the CT error?
Error reduces if load increases.
• What is the advantage of housing CT’s with in bushings?
Bushing acts as a primary insulator for the CT.
• Why the earthing transformer primary voltage is 16.5 kV rated in main generator
even though actual voltage during the E/F is root 3 times less?
The transformer should not saturate during E/F otherwise it will cause
ferroresonance with the GT winding capacitance. Dangerous O/V and neutral
shifting will occur. During loss of load or field forcing conditions, the transformer
voltage increases to cause saturation. Saturation can also occur due to point on wave
of application causing flux doubling.
• Where are the following relays used?
a) Very inverse b) extremely inverse relays c) definite time O/C Relay d)
instantaneous O/C Relay.
a) Very Inverse – Used where inverse protection reduces substantially as distance from
source increases, operating time doubles for a fault current reduction from 7 in to 4 in,
used where the short ckt current is independent of generating conditions.
Question and answers Electrical Maintenance Unit
- 287 -
b) Extremely inverse – Used for feeders subjected to peak making currents. Grade with
HRC fuses, e.g. Refrigerator, pumps.
c) Definite time O/C Relay – Where neutral is resistance earthed- fixed ground current.
d) Instantaneous O/C Relay – Used along with inverse O/C relay – to get higher grading
margin. Disadvantage – Under minimum generation it may not operate.
Question and answers Electrical Maintenance Unit
- 288 -
• Why delta – delta CT’s are used for star – star transformer differential protection?
Say primary neutral is not solidly earthed. Then for any earthfault on secondary
terminal, the primary current distribution is so for external fault, the differential is
likely to operate if sequence current from flowing into relay. The 2:1:1 distribution is
possibly only for core type or delta tertiary.
• Show the CT characteristics.
Knee point region (Protection characteristics)
Saturation region
Peak flux density
Linear region
Ankle point
(Measuring CT characteristics)
RMS amp turns
• What is knee point?
Knee point is the region, where 10% increase in flux causes 50% increase in exciting
ampere-turns.
• When will you say that the CT is saturated?
When checking the CT with the secondary injection method a 10% increases in the
voltage causes a 50% increase in the current the CT is said to be saturated.
• What is the problem anticipated due to CT saturation?
The CT will not be able to drive the current through the circuit causing nonoperation
of relays. In some other case when the currents in the two phases are
compared for relay operation the relay may operate due to unbalance.
• How can you de-saturate the CT?
Pass ac current through the primary and vary the current from zero to maximum with
secondary in shorted condition.
Pass dc current in the secondary and vary it from zero to maximum.
• Why CT should not be open circuited?
Very high voltage will be induced in secondary due to less back emf resulting in the
failure of the insulation.
• What precaution should be taken while removing a current operated relay when the
equipment is in service?
Question and answers Electrical Maintenance Unit
- 289 -
Ensure that the CT is not getting opened by shorting the appropriate terminals.
(Eventhough the terminals are automatically shorted once relay is removed the above
point may carried out to ensure the same)
Question and answers Electrical Maintenance Unit
- 290 -
• What do 10p15 mean?
When the current passed through the CT is 15 times the rated current then the
secondary current will have a composite error of 10%
• Where core balance CT’s are used?
In earth fault protection used. It senses the zero sequence current.
• What are the specifications of CT?
Protection CT - Error. Alf. KpV.
Metering CT - Error. Burden.
Differential CT - Class PS.
Core balance or E/F CT - 5-p type.
Primary current -
Rating of CT - 1. 15 ( full load current )
Short time rating - 1 sec.
• Why differential protection for PHT motors?
For more than 2500 kW motors it is required to provide differential protection. It is
biased Relay against internal phase fault or earth fault very fast. Insensitive to
starting current and stalling current.
• What are the errors of the following CT’ s 5p. 10p. 15p. At rated current?
5p - 1 % Ratio error ± 60 min phase error
10p - 3 % Ratio error ± 60 min phase error
15p - 5 % Ratio error ± 60 min phase error
• What is the operating point in the Magnetising characteristic of protection CT &
measuring CT?
Protection CT – Operation at ankle point only.
Measuring CT – Operation from ankle to knee point
• What is over voltage interturn test for CT?
With secondary open, pass rated current in primary for 1 min. Then check secondary
for insulation.
• A CT has 2 – secondary windings. If we use only one secondary winding can we
keep the unused secondary winding short circuited?
No. If it is short-circuited then the ratio will not get correctly. The turns of primary
winding will be shared between 2 secondary windings. So the unused secondary
winding should kept open.
• But is it advisable to keep the secondary of CT in open conditions? Will not induce
very high voltage?
Question and answers Electrical Maintenance Unit
- 291 -
If the CT has only one secondary winding, we should keep it always short cktd for
safety, but if the CT has multiple secondary, then if one secondary voltage is kept
limited by suitable loading, then the other secondary voltage is eventually limited
proportionately.
Question and answers Electrical Maintenance Unit
- 292 -
• Why PT fuse fails protection?
Mho relays will mal-operate if PT voltage is lost to the relay, so tripping blocked by
sensing PT fuse failure.
• What is the 2 stage stalling protection for PHT motor?
Because locked rotors withstand time of motor is less than starting time of motor
under reduced voltage conditions.
Stage 1 = 350% 6 sec for starting at rated voltage
(Because starting time = 6 sec + hot stall time = 7 sec)
Stage 2 = 175% 15 sec to permit 14 seconds starting time under reduced voltage
condition
(Since starting current is less, stage 1 will not operate)
• Purpose of start up protection? Is it always in service?
Trips the generator. If generator is excited with internal fault the over current 50s trip
the generator to prevent major damage. The earth fault relay 64c also. The relays are
polarised dc armature type, sensitive to all frequencies, since the frequency need not
to be 50 Hz initially during start up. Start up protection is cutout as soon as generator
CB is closed.
• What is the standard CT polarity?
Primary current enters at P1 and secondary current leaves at S2.
• Does over load relay give 100% guarantee against the single phasing?
No. It depends on the motor load and the motor winding (star or delta).
• What are the effects of single phasing?
a. Current will increase √3 times.
b. More heat in stator and rotor parts.
c. Insulation failure and short circuit & Ground fault may occur.
• What is the purpose of CT & PT?
For transformation of current, voltage to a lower level for the purpose of
Measurement, Protection and Control.
• Where CT secondary of 1A we are using?
For long distance current transmission, to reduce the IR drop.
• What is the nomenclature of English electric relay?
a) First letter-operating quantity
b) Second letter-movement
c) Third letter-application
Question and answers Electrical Maintenance Unit
- 293 -
d) Fourth letter-special variation.
• Define knee point voltage.
The voltage applied to secondary of CT keeping the primary open at which
10% increase in voltage causes 50% increase in excitation current.
Question and answers Electrical Maintenance Unit
- 294 -
• What is differential protection?
It is the current balance type protection, in which vector difference between current
entering the winding is used for relay operation.
• What are the checks on CT & PT?
a) Polarity checks
b) Insulation checks
c) Ratio checks
d) Knee point voltage (only for PS class CT)- magnetising characteristic test.
• What is Local Breaker Back up protection?
In case of local breaker fails to operate during fault due to mechanical failure this
protection will protect the system from sever damage. It will trip all the other
breakers in that bus after time delay.
Question and answers Electrical Maintenance Unit
- 295 -
TRANSFORMERS
• Give transformer nameplate details of GT, SUT, UAT, SET, 415 V Aux transformer
and Lighting transformer.
GT SUT UAT SET 415V Aux trans. L Trans.
USI 5210 5120 5220 4120 5242 5231
Make Telk Telk BHEL BHEL EE Square
Automation
STD IS – 2026 IS– 2026
Type WFOC Oil immersed Oil immersed DRY RESIN
CAST DRY RESIN CAST DRY RESIN CAST
Cooling OFWF ONAF / ONAN ONAF / ONAN AN AN AN
VA 260/260 MVA 35/20/20/12 MVA
24.5/14/14 MVA
35/20/20 MVA
24.5/14/14 MVA
3150 kVA 1800/1200 kVA 250 kVA
Volts 235/16.5 kV 220/6.9/6.9/11
kV
16.5/6.9/6.9
Kv
16500/575
V 6600/435 V 415/415V
Amps 639/9098 A 64/1172/440 A
91/1675/629 A
1266/858A
1676/1172 A 157.5/2400 A 630/250,125A
No of φ 3 3 3 3 3 3
Frequency 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Impedance 13.13 (14) % 9.75% / 18.82% 10 ±10% HV
22 ±10% LV
Vector YNd11 Yn yno yno
(d1)
D yn1 yn1 Dyn Dyn11 Dyn11
Oil 42000 Lt. 25260 Lt. 19750 Lt.
Tap change Off load ON load HV ON load HV
Tapchange% 10 steps of 2.5 % ϒ12% in 1.5% steps ϒ12% in 1.5% steps
• What is the use of Tertiary winding?
Star connected circuit, which has an isolated neutral there can be no zero sequence
components. Since the zero sequence components are by definition in time phase
with another their sum can not be zero at the junction point as per kirchoff’s law. It
follows that there are limitations upon the phase loading of a bank of transformers
connected in star – star unless the neutral points are connected to the source of power
in such a manner that the zero sequence components of current have a return path or
unless the transformer are provided with tertiary winding.
• What is E/F current limit for SUT and UT?
400a limited by 10 ohms resistor.
• What is the coverage of differential protection for SUT?
Covers from 230 kV bushing to 6.6 kV breaker end.
• What are the advantages of dry type transformer?
No fire hazard.
It can be mounted indoor.
Question and answers Electrical Maintenance Unit
- 296 -
• During unit operation, can we parallel 2 SUT?
No, due to switchgear limitation.
Question and answers Electrical Maintenance Unit
- 297 -
• Why 6.6 kV transformer is resistance grounded by 10 ohms and current limited to
400 A?
a) To reduce burning and melting in faulted switchgear or machine.
b) To reduce mechanical stresses in equipment.
c) To reduce the electrical hazards by stray ground fault currents in the ground
return path.
d) To reduce momentary line voltage dip due to ground fault.
e) The current is limited to 400a, that is ¼ th of the load current to reduce the size of
the screen in 6.6 kV XLPE (cross-linked polyethylene). Therefore the cost of the
cable decreases.
• During unit operation can we have one UT feeding both unit 6.6 kV loads?
No, logically prevented.
• During unit operation, can we parallel UT & SUT continuously?
No, due to switchgear limitation.
• What is the design basis of 6.6 kV aluminium bus bars?
a) Temperature rises not exceed 90 ºC.
b) Withstand short ckt stresses.
c) Take care of thermal expansion.
• Why 2 types of earth fault relays in 6.6 kV side of transformers?
I – Trips 6.6 kV breakers only. It gives primary protection for 6.6 kV bus bars.
I1 – Trips the both HT and LT breakers. It acts as a backup to ref and also acts as
backup to bus bar earthfault relay.
• Why core balance CT is preferred over residual connected CT’s to sense earth fault
in 6.6 kV feeders?
a) To avoid relay mal-operation due to CT saturation
b) Better sensitivity is got.
c) High pickup and TMS avoided in IDMT earth fault relay.
• How selection of cooling fluid in GT done?
a) There are 5 factors are there.
b) Density
c) Coefficient of thermal expansion
d) Viscosity
e) Specific heat
f) Thermal conductivity.
• What are the ranges in which each type is effective?
Question and answers Electrical Maintenance Unit
- 298 -
ONAN – Natural cooling – up to 15 MVA.
ONAF – Air forced radiators cooling – 10 to 100 MVA depending on availability of
area.
OFWF = oil forced and water forced used in more than 100 MVA.
Question and answers Electrical Maintenance Unit
- 299 -
• Why off load tap changer was chosen for GT?
Because our plant works on base load always.
• What are the advantages of OFWF?
Ensure the differential temperature between top and bottom of transformer is
minimum and Effect of ambient air temperature is minimum.
• What is the type of lightning arrestor for GT?
Zn O (zinc oxide) types.
• What is the purpose of header breaker in water circuit?
The header breaker ensures oil pressure greater than that of water pressure always.
Therefore there is no leak of water into oil.
• Why thermosyphon filter required?
To keep required dryness/improve dryness of the transformer insulation, internal part
of transformer. When transformer operates, due to pressure head between top and
bottom small quantity of oil flows through filters (absorbent material activated
alumina grade g-80 removes the moisture from oil). Absorbent material remove
slag, acids, peroxides, ionic impurities from oil, which otherwise accelerate
against of oil. Absorbent unit is reactivated at regular intervals.
• What is the purpose of pronol conservator (KAPP)?
Flexible separator avoids direct contact with atmosphere. Efficient barrier between
oil and air. Ensures the protection against water vapour, suppression of gas bubbles
formation in the oil.
• Why main generator/UT is not provided with separate overfluxing protection?
Since GT is provided with overfluxing protection, it is adequate to protect main
generator / UT also. Main generator can withstand higher degree of overfluxing. If a
generator CB is used, separate overfluxing protection is essential for main generator.
• What is the advantage of Pressure relief device in TELK type GT over explosion
vent of BHEL, even though in both cases oil will be expelled out during sudden
pressure rise?
During internal fault, the internal pressure rise is relieved by the expelling out of oil
through Pressure relief device /explosion vent. However the Pressure relief device
closes back when the pressure drops. Hence the oil exposure to atmosphere is
minimised, thus saving large quantity of costly transformer oil from oxidation and
moisture absorption. Fire hazard due to transformer oil does not exist after the
closure of Pressure relief device.
Question and answers Electrical Maintenance Unit
- 300 -
• To reduce tower-footing resistance, which are better to use a) chemical, b) ground
rods, c) counter poise?
B & C
Question and answers Electrical Maintenance Unit
- 301 -
• Why tap changer is kept at neutral end?
a) To reduce insulation cost of tap changer.
b) But reactance changeover the tap range increases.
• Why guard connection is given for megger?
For true measurement of IR value of HV to earth of a transformer, connect line to
HV, earth to transformer tank and guard to LV. Therefore leakage current from HV
to LV is not included.
• Why lighting isolation transformer is req.?
a) 3 wire to 4 wire conversion, since neutral is required for lighting load.
b) Prevents transfer of E/F currents
c) Reduces the fault level on secondary side and permits use of small sized cables /
CB’s / fuses.
• Why neutrals are solid grounded above 33 kV?
a) Less transient over voltage due to arcing grounds.
b) Voltage of phases are limited to phase to ground voltage. (No neutral shifting)
c) Allows graded insulation of transformer (low cost)
d) Fast E/F protection.
• Why SET is chosen as Dyn 11?
To have smooth commutation in generation in between stator and rotor.
• Why all 415V transformers are chosen Dyn 11? What are the protections provided
for the 415V transformers?
a) To facilitate interchange.
b) To have momentary parallel during changeover.
Protections
a) Door interlock to trip HT and LT breakers.
b) LT breaker can on only after HT breaker is in on position.
c) Instantaneous O/C and inverse O/C (50 + 51).
d) Instantaneous E/F (50N).
e) IDMT E/F and restricted E/F (51N + 64).
f) Winding temp high trip (140°C trip and 130°C alarm)
• What is the instrument name used for thermograph?
Infrared camera.
• Why neutrals are solid grounded below 600v?
Question and answers Electrical Maintenance Unit
- 302 -
Human safety
Permits enough E/F current because ground resistance is large in less than 415v,
hence fast fault clearance,
Equipment safety against over voltage.
Question and answers Electrical Maintenance Unit
- 303 -
• What are the advantages of ungrounded system?
Supply is maintained even with fault on one line
Less interference to communication lines because of absence of zero sequence
currents.
• Why resistance grounding preferred for less than 33 kV and more than 415 V?
a) To limit the earth fault current for equipment safety else, high short ckt forces
dislocate in windings/bus bars etc,
b) Over voltage due to arcing ground reduced
c) Permits earth fault protection (not possible in ungrounded system)
• What is meant by tan-delta measurement?
It is the tan of the angle between the capacitive current and the total current.
Ir
Ic Ic - capacitive current
I Ir - resistive current
I - total current
As the value of tan delta increases the resistive component of the current in
increasing. Hence it shows a weak insulation.
• What is the vector group of GT, UT, SUT?
Yd11
Dy1
Yy0
• Why all the transformers are having different vector group?
UT and SUT are getting paralleled at 6.6 kV bus. Hence they should have voltage of
same phase relationship. This is achieved by assigning different vector group to the
transformers.
• What are the built in protections for transformers?
a) Buchholz relay
b) Explosion vent or relief valve
c) Gas operated relay for on load tap changers.
• Why water pressure is kept below the oil pressure? How it is maintained?
Incase of a heat exchanger tube failure the water should not go inside the
transformer. For this purpose the oil pressure is kept above the water pressure.
Question and answers Electrical Maintenance Unit
- 304 -
• What is the requirement oil in a transformer?
Oil is used removal of heat produced in the transformer and also as insulating
medium.
Question and answers Electrical Maintenance Unit
- 305 -
• What is meant by over fluxing of transformer?
When the voltage is increased and the frequency is reduced the transformer will draw
high magnetising current. This will result in higher core loss and subsequent heating
of core and ultimate failure of transformer. Hence over fluxing protection is provided
for the transformer.
• What type oil pumps are used?
Canned rotor pumps.
• What is oil reclaiming and reconditioning?
In reclaiming process the oil treated to remove all its impurities like acidity, sludge,
sediments, moisture etc. The treated oil will be in par with the new oil. In
reconditioning process (filtering of oil) only moisture and suspended impurities and
sediments are removed.
• Why there is no mixing of oil of tap changer and transformer?
When the tap changing takes place arc is struck between the contacts. Due to this the
oil inside the tap changer will be highly carbonised. If both oil get mixed up the
quality of transformer tank oil will come down. This is not advisable. Hence both
oils are kept separately.
• Why the tap changers are always connected to HV side of the transformer?
During tap changing action the load current has to be shifted from one tap to another
tap. In case HV wining the load current will be less. Hence lesser arcing will take
place.
• What is the purpose of conservator?
To accommodate the change in volume of oil during increase in temperature.
• Why the neutral is earthed through earthing resistance in case of UT and SUT?
This is done to limit the earth fault current.
• Why REF is provided in the LV side of SUT and UT?
The LV sides of the two transformers are earthed through the resistance. This will
limit the flow of current in case of LV earth fault. Hence the differential protection
may not act for a LV earth fault. Hence ref protection is provided.
• Why twin secondary SUT?
As per is, the rating single secondary power transformer is limited to 25MVA (6.6
kV) or 40 MVA (11 kV), in order to limit the 3 phase symmetrical fault level with in
26-40 kA (contribution from grid and local machines)
Question and answers Electrical Maintenance Unit
- 306 -
• How 6.6 kV-bus supply was chosen?
11 kV was rejected in view of the high insulation cost with 11 kV motors.
3.3 kV was rejected, since max motor size with 3.3 kV bus is limited to 2 MW. But
we are having the motors having rating more than 2 MW, which cannot suit to 3.3
kV bus. 6.6 kV bus we can start upto 5 mw size motor.
Question and answers Electrical Maintenance Unit
- 307 -
• Why oil transformers are out door?
Oil fire point = 170 ºC easy catching of fire.
• What are the I.S used in transformers?
IS – 1866 FOR MAINTENANCE AND SUPERVISION OF OIL
IS – 10593 FOR GAS ANALYSIS
IS – 1886 FOR INSTALLATION AND MAINTENANCE
• When oil filteration is required?
On reweaving oil test results.
Draining of oil for maintenance
Topping up of transformer oil
• Why oil filteration is required?
To remove water, sediments, sludge etc.
• What are the types of oil used for in transformer for cooling?
Paraffin based and naphtha based (in INDIA)
• What are the types of bushing used in transformer?
Condenser type bushing
Porcelain type bushing
• What are the precautions to be taken while terminating the bushings?
Contact surfaces with intermediate plates,
Mating surfaces should be identical.
• How bushings are terminated inside the transformers?
By grooving method or by binding wire method.
• Why ICT are used?(INTERPOSING CT)
To correct the system primary CT errors in case of high current faults out side CT
zone (ICT’s primary CT is 800/1, but in fault current may go to thousands of amps.
This ICT will take care of those errors.
a) Matching the ratios.
b) Matching the phase angle differences.
• How CT is connecting in ckt?
If the primary of CT is delta connected load the CT will be in star connection and
vice versa. This is because to have square root 3 time compensation.
Question and answers Electrical Maintenance Unit
- 308 -
• What type of gasket and adhesive are used in transformer?
Gasket – Neoprene based rubberised cork type RC70-C. (IS4253)
Adhesive –Dunlop adhesive S-758
These are recommended by TELK
Question and answers Electrical Maintenance Unit
- 309 -
• What are the precautions to store the Gasket?
a) Stress free storage
b) No folding
c) No reuse
d) Replace with same thickness
• What is the in built protection for transformer?
PRV to protect from over pressurization of tank due to the release of gases, oil etc.
This is the replacement for the explosion vent.
• Why UT, SUT secondary is rated for 6.9kV where as bus voltage is 6.6kV?
The no load secondary 6.9kV voltage level adequately takes into account voltage
drop during loaded condition to cater station buses at 6.6kV level.
• Why our GT having off load tap changer?
Because our station is base load station.
• Why vector group of SUT is chosen as Yn-Yo-Yo?
To facilitate momentary paralleling of SUT with UT on 6.6kV buses.
• Grounding of various transformers.
GT HV solidly grounded
LV (delta)
UT HV (delta)
LV cast stainless steel 9.95 ohms 400A for 10 seconds.
SUT HV solidly grounded
LV cast stainless steel 9.95 ohms 400A for 10 seconds.
• What are the protections for GENERATOR TRANSFORMER?
a) Differential protection
b) Restricted earthfault protection
c) Backup earthfault protection
d) GT phase back up protection
e) Overfluxing protection
f) Oil surge (gas) protection
g) High winding temperature and oil temperature protection.
• What are the protections for SUT?
a) Over current protection for phase and earth fault
b) Differential protection
c) HV and LV restricted earthfault protection
Question and answers Electrical Maintenance Unit
- 310 -
d) HV side directional back up over current protection for phase and earth fault.
e) LV back up over current and earth fault protection
f) Over fluxing protection
g) Buchholz and high oil, winding temperature protection.
Question and answers Electrical Maintenance Unit
- 311 -
• What are the protections for UT?
a) Differential protection
b) LV restricted earthfault protection
c) LV back up earthfault and over current protection
d) Buchholz and high oil, winding temperature protection.
• What is the purpose of carona ring?
To minimize the arcing current during switching operations of disconnecting
switches.
• What are the various tests on transformers?
a) Tan delta and capacitance dissipation factor
b) Tests on cooling fans
c) Tests on OLTC
d) Vector group test
e) Short circuit test
f) Open circuit test
g) Insulation resistance test
h) Turns ratio test
i) Winding resistance test.
• Why input transformer of PUPS module 1 is delta-delta and module 2 is delta-star?
With the help of this arrangement, combined DC output from both chargers is
equivalent to that from a 12-pulse rectifier. Advantage of 12-pulse rectifier is that the
mains current is fairly close to sine wave. Harmonics injected into system by rectifier
are low. The phase angle difference 30-degree between module 1 output and module
2 output give 12-pulse output.
Question and answers Electrical Maintenance Unit
- 312 -
Question and answers Electrical Maintenance Unit
- 313 -
MOTORS AND MCC
• What is Motor?
It is a device, which converts electrical energy into mechanical (rotating) energy.
Definition of terms used in Motor:
1) Duty Cycle rating: Most motor has a continuous duty rating to permit continuous
operation at a rated load. However motors may be rated as intermittent duty,
periodic duty or varying duty and must be turned off and allowed to cool after a
fixed operating time.
2) Full- Load current: The current required to produce full-load torque.
3) Jogging: The starting and stopping of a motor at frequent intervals.
• What is Motor controller?
A device that controls some or all of the following functions: starting, stopping,
overload protection, over current protection, reverses, changing of speed sequence
control and running/jogging.
• What is Motor speed?
The shaft speed of the three-phase squirrel cage motor is determined by the
frequency of the supply voltage and the number of poles in the motor. A two-pole
motor runs at a speed of 3000 rpm on 50 cycles per second.
rpm = cycles per second x 60 - slip
Poles
(Where slip is the difference between the speed of the rotating magnetic field and the
speed of the rotor.)
• Why Over current protection used?
A fusible disconnect or circuit breaker used to protect the branch circuit conductors,
control devices and the motor from grounds and short circuits. the over current
protection device must be capable of carrying the starting current to exceed 400% of
the motor full load current.
• What is Overload?
Any excessive amount of current drawn by the motor is called overload. Overloads
on a motor may be mechanical or electrical.
• What is Plugging?
The instant reversal of motor is called plugging. Damage to the driven machinery
can be result if plugging is applied improperly.
• What is Sequence control?
Question and answers Electrical Maintenance Unit
- 314 -
The control of separate motors to operate in a predetermined pattern.
Question and answers Electrical Maintenance Unit
- 315 -
• What is Service factor?
The amount of overload that may be permitted without causing significant
deterioration of the insulation on a motor. For example, if a 10 hp motor has a
service factor of 1.15, the motor can be safely be subjected to an 11.5 hp load.
• What is Starting current or Locked rotor current?
The current flow in the motor at the instant of starting. This current can be 4-10
times the full load current of the motor. The most common locked rotor current is
about 6 times the full load current. Such a motor will start with a 600% overload.
• What is Torque?
The twisting force produced by the motor is called torque. Its unit is in foot-pounds
(ft-lb.), torque is related to horsepower by the following formula.
Torque = horsepower * 5252
Revolution per minute (rpm)
• Write details MCC construction.
a) MCC are made up of sheet steel enclosure, indoor floor mounting and free
standing, Dust and vermin proof, modular type and of double front and single
front (X1, Y1).
b) Degree of protection is IP 50 as per IS 2147.
c) 0.9 * 0.8 * 2.4 meters size (double front and single front) and top entry of cables.
d) 0.9 * 0.6 * 2.4 meters size (single front) and bottom entry of cables.
e) Parts are incoming panel, Cable entry, TB compartment, MCC module
compartment.
f) MCC modules are fully drawn-out type.
g) Main buses are horizontally mounted and vertical buses are connected to MCC
cells.
h) Stab – in contacts are used for power and wipe – in contacts are used for control
circuits.
i) CT and PT are used for current and voltage measurements.
j) 3φ indication lamps are provided for identification.
k) Voltage meter and ammeter are provided.
l) Panel space heater and emergency push button key operated are provided.
m) Control building and SRPH MCC are safety related and SB, TB, RAB, CWPH,
DM Plant MCC’s are non safety related.
• What is the maximum load on MCC?
3 Phase load upto 90 kW are fed by MCC.
Question and answers Electrical Maintenance Unit
- 316 -
• What are the types of MCC?
Type Application Protection
A Receptacles, Cranes, Elevators, Local control panels Fuse
B Locally controlled heaters Fuse, 49
C Remote controlled heaters Fuse, 49
D Remote controlled loads <29 kW (49 in control panel) Fuse
F For valve motors Fuse, 49
G Locally controlled loads <29 kW Fuse, 49
H Locally controlled loads >29 kW (RTM installed) Fuse, 49
I DG MCC
J Remote controlled loads <29 kW Fuse, 49
K Remote controlled loads >29 kW (RTM installed) Fuse, 49
L Barring gear motor MCC Fuse, 49
SP For F/M supply and PHT S/D cooling pumps CT, PT Used
• What is the operating life of bearings?
a) Continuous 24 hrs operation – 40000 to 50000 hrs.
b) Affected by load axially or radial.
c) Operating temperature.
• Give the 415 V MCC bus ratings and cable used.
All MCC bus bars are made of aluminium. Short time current is 50 kA/sec and
momentary rating is 105 kA.
Type Bus Rating Class Location Cable Used
K1 1000 A IV TB 111 Mts.
K2 1500 A IV TB 111 Mts.
L1 1000 A IV RAB 108 Mts.
L2 1000 A IV SB 106.5 Mts.
L3 1500 A IV TB 111 Mts.
M1 1000 A IV SB 106.5 Mts.
M2 1500 A IV TB 111 Mts.
N1 1000 A IV TB 111 Mts.
N2 1000 A IV RAB 108 Mts.
W1 1500 A IV CCW PH 98 Mts.
W2 1000 A IV DM plant 98 Mts.
P1 1500 A III CB 100 Mts.
P2 1500 A III CB 106.5 Mts.
Q1 1500 A III CB 100 Mts.
Q2 1500 A III CB 106.5 Mts.
X1 600 A III SRPH 100 Mts.
Y1 600 A III SRPH 100 Mts.
PMCC S 630 A II CB 106.5 Mts.
Question and answers Electrical Maintenance Unit
- 317 -
PMCC T 630 A II CB 106.5 Mts.
Question and answers Electrical Maintenance Unit
- 318 -
• What are the types of isolators used?
Isolator Range Loads
32 A ≤ 9.3 kW
63 A > 9.3 kW and ≤19 kW
125 A > 20 kW and ≤ 47 kW
250 A > 48 kW and ≤ 110 kW
400 A > 111 kW and ≤ 134 kW
600 A ≤ 310 kW
• What are the ranges of fuse used?
Fuse Range Loads
2 A 10 to 280 watt
4 A 340 to 440 watt
6 A 500 to 700 watt
10 A 1000 to 1500 watt
16 A 1.8 kW to 2.25 kW
20 A 3 to 4 kW
25 A 5 to 8 kW
32 A 9 to 9.3 kW
50 A 9.6 to 15 kW
63 A 16 to 19 kW
80 A 22 to 24 kW
100 A 25 to 36 kW
125 A 38.6 to 45 kW
160 A 48 to 67.5 kW
200 A 72 to 80 kW
250 A 85 to 90 kW
• What is use of fuse in electric circuit, what are the materials used for fuse and what
are their melting points?
Fuse is a weakest point in an electrical circuit, which breaks the circuit when
abnormal current more than it’s rating flows through it. It works on principle of joule
law (I2Rt). HRC fuse is filled with quartz powder to extinguish the arc generated in
breaking the circuit or when fuse blown.
Current rating is depends on the type of material, cross section area, length and size
of terminal (large size terminal dissipates more heat).
Formulae
H = I2Rt/J
R = ρl/a
a = d2π/4
Material Melting point in °C
Silver 1830
Copper 2000
Question and answers Electrical Maintenance Unit
- 319 -
Aluminium 240
Zinc 787
Tin 436
Lead 624
Question and answers Electrical Maintenance Unit
- 320 -
• What are the materials made of thermal overload relay? How OLR are selected?
The bimetallic materials are Invar and brass. These materials having the differential
coefficient of expansion. All bimetallic relays incorporate additional built in single
phasing protection.
The range of the relay provided for the feeders are such that the full load rating of the
feeders is comfortably within the range of the relay (range will be at Centre) except
in very minimum loads ranging from 0.1 – 0.16 A.
• What are the functions of arc chute?
To increase the speed of rise of arc by magnetic action.
It splits the arc by this arc resistance increases.
Diagnosing the arc by cooling.
• What are IP (ingressive protection) and IC?
IP means ingressive protection to the motor against the dust and water entry.
The first digit indicates protection against accidental contact with live or moving
parts (solid particles).
The second digit indicates protection against ingress of water, foreign bodies (liquid
particles).
IC means instrument cooling to the motor (type of cooling)
• What are the classes of AC motors?
Depends on phases
a. 1φ.
b. 3φ.
Depends on construction
a. Squirrel cage induction motor for fixed torque.
b. Wound rotor motor for variable torque.
Depends on voltage
a. LT motor - <200 kW.
b. HT motor - >200 kW.
Depends on torque and current
a. Class – A (Normal torque and normal starting current. E.g. Fractional motors.) .
b. Class – B (Normal torque and low starting current).
c. Class – C (High starting torque and low starting current. E.g. Double sq. cage motor)
d. Class – D (high starting torque and high starting current).
Depends on mechanical characteristics
a. Drip proof (IP 54). Safety against water or dust.
b. Splash proof.
c. TEFC (totally enclosed fan cooled).
d. TEOV (totally enclosed open ventilated).
e. TETV (totally enclosed tube ventilated. Principle is thermosymphony E.g. - CEP).
f. Explosion proof.
Question and answers Electrical Maintenance Unit
- 321 -
• What is the PI value required for motors?
For class F insulation >2 and for class B insulation 1.5 to 2.
Question and answers Electrical Maintenance Unit
- 322 -
• What are the enclosures used for HT and LT motors?
LT motors (<200 kW)
a. Open drip proof.
b. TEFC.
c. Totally enclosed air over type.
HT motors (>200 kW)
a. Open drip proof.
b. Weather protected I
c. Weather protected II
d. Totally enclosed water-cooled.
e. Totally enclosed pipe ventilated.
• What are the causes of motor failure?
a. Corrosion or rust.
b. Excessive moisture (winding IR low and bearing lubrication loss).
c. High ambient temperature.
d. Poor ventilation.
e. Inadequate lubrication.
f. Misalignment.
g. Oil and dirt.
h. Excessive starts and repetitive surges.
i. Persistent over loads.
j. Shaft currents (bearing pitting).
k. Mis application.
l. Manufacture defect or wrong design.
m. Deterioration with age.
n. Maintenance improper.
• What are the effects of excessive starts and repetitive surges?
Repetitive surges may give impact to the insulation of the motor and dielectric
capability of the motor.
Excessive starts may subject stator winding to high current for more time.
Subsequently in HT motor due to High Mass rotor bar and rotor short ring may loose
or fail. Bearing also may damage.
• What are the effects of broken rotor bars and broken shaft parts?
Broken rotor bars
a. High stator current and over heat of stator winding.
b. More harmonic currents in end parts.
c. High vibration.
Broken shaft or parts
a. Stator winding loose bracing.
b. Rotor high vibration and bearing vibration.
c. Frame vibration and more harmonics in side bands.
• Give the relation between current and temperature in motors.
Question and answers Electrical Maintenance Unit
- 323 -
a. Winding temperature is proportional to square of the current.
b. 10% increase in current gives 30% increase in temperature.
c. 10°C rise in temperature makes 50% life reduced.
Question and answers Electrical Maintenance Unit
- 324 -
• What are the effects of imbalance stator winding resistance?
If the stator winding resistances are imbalance phase to phase give pulsating fluxes
and pulsating torque on rotor and vibration may increase. For accurate resistance
measurement Kelvin Bridge is used.
• What reflects the change in speed?
a. Supply frequency may vary the speed of the motor.
b. Load on the motor may vary the speed of the motor.
• What is use of BORESCOPE inspection?
BORESCOPE inspection method makes it easy to observe the end winding condition
of the motor. In this inspection winding ties, loose coils, dust etc can be observed.
• What you mean by CRAWLING and COGING?
Crawling
The motor fails to rotate at rated speed or motor rotates at … or 20% speed is called
motor crawling. This may be due to system imbalance or more pulsating torque.
Coging
Motor fail to start atoll is called motor coging.
• Why motor starting current is high compared to transformer charging current?
Transformer charging current is only 1% and that of motor starting current is 30 to
40%. Because of air gap between stator and rotor. If the air gap is more load taking
capacity increases and if air gap is less the load taking capacity reduces.
• State construction details of the motor.
Stator or rotor core
Built from high quality low loss silicon steel laminations and flash enameled on both
the sides made up of close-grained alloy cast iron.
Rotor conductor
Heavy bars of copper or aluminium alloy.
Stator
Copper conductor.
• What is the use of making rotor skewing?
1. To run motor quickly by reducing magnetic hum.
2. It reduces locking tendency with the stator.
• Why under voltage tripping of motor is incorporated in motor feeder breakers?
The under voltage can occur in case of bus fault. If the motors are kept connected
they will feed the fault which may cause the damage. Due to the back feeding from
the motor the motor will slow down very fast. Hence process system will come to
Question and answers Electrical Maintenance Unit
- 325 -
halt very fast. (In case pht motor will not rotate for the designed 3 minute period in
case of bus under voltage).
Question and answers Electrical Maintenance Unit
- 326 -
• What are the problems in station operation due to grid under voltage?
a) All the HT motors overloaded.
b) VAR load increases on generator leads to heating up of rotor
c) Stator current increases for same power export leads to stator over heating.
• What are the problems in station operation due to grid under frequency?
a) Turbine having under frequency limitation, house load happen if < 48 Hz
b) Due to under frequency PHT flow reduces, therefore reactor power reduces,
generator power reduces
c) If frequency is less than 48 Hz DG cannot be synchronised to grid, therefore DG
kept on isolation running
d) GT overfluxing.
• What is the difference between fixed trip and trip free?
Fixed trip: Breaker will trip only after closing even if trip impulses are existing.
Trip free: Breaker is free to trip at any position.
• What is the making current capacity of a 3-phase breaker as derived from its
symmetrical breaker capacity?
Making capacity = 2.55 times symmetrical breaking capacity.
• Why intermediate contacts in English electric breaker?
To prevent even slightest arcing on main contacts.
• Where preloaded ball bearings used?
If more vibration exists even when machine is not in running conditions.
• Why do we grease the bearings?
a) Grease lubricant gives good protection against ingress of moisture and dirt into
motor.
b) Easy to seal against leakage of grease into motor compared to oil.
c) Low friction torque at starting.
• Which bearings preferred for all large power motor?
Plain bearings
• Which is more dangerous alkali or acid?
It especially exposed alkali is more dangerous, use boric acid powder solution
immediately.
• What FCN was implemented to avoid reactor trip on 220V-DC failure of PHT and
PPP breakers?
Question and answers Electrical Maintenance Unit
- 327 -
The breaker close position supervision relay VAA 21 is changed by VAJC type,
contacts position do not change if 220V-DC is lost now.
Question and answers Electrical Maintenance Unit
- 328 -
• Where oil lubrication is preferred over grease lubrication?
a) Determined by speed and operating temperature.
b) Oil lubrication recommended.
c) When speed and temperature is high.
d) When heat to be conducted away from bearing.
e) When adjacent machine components are oil lubricated.
f) High viscous oil for low speed machine, low viscous oil for high speed machine.
g) At temp<125 ºC, synthetic oils recommended.
• What are the causes of failure of bearings?
a) Faulty mounting
b) Faulty lubrication
c) Foreign matter in lubrication
d) Water in the bearing arrangement
e) Vibration
f) Inoccurrences of form of shaft or housing seating.
g) Passage of electric current.
h) Metal fatigue.
• What does the bearing number mean?
7318 7 = single row angular contact ball bearings
3 = width of race
18 = 18 x 5 = 90 mm bore diameter.
6310 6 = single row deep groove ball bearings.
3 = width of race
10 =10 * 5=50 mm dia
• What is the purpose of static starter? How current setting adopted?
The static starter limits the starting current of the motor to 2.5 times the motor rated
current instead of 6 times the rated current. If the motor is directly on UPS, the UPS
fuse will blow, since the UPS cannot supply so much starting current. Hence the
static starter is set to limit the starting current. This is achieved by firing angle
control of back to back thyristor.
• What is the speciality of the inverter output transformer? Why it is provided?
a) This eliminates all 3rd harmonics in the output voltage.
b) Solid earthed neutral is required for the inverter output, hence the interconnected
star winding is essential.
c) The primary has to be star (not delta), since 3 separate inverters operates on
isolated primary winding.
d) Delta connection will cause circulating current between inverters during
unbalanced faults. The inverters cannot withstand this.
Question and answers Electrical Maintenance Unit
- 329 -
Question and answers Electrical Maintenance Unit
- 330 -
• Both silver and copper oxidise in air. Then why copper contacts are silver-plated?
The silver plating avoids the oxidation of copper, especially in outdoors. Silver
oxidises very readily. But its oxide is a good electrical conductor but copper oxide
produce a film of insulation.
• When auto transfer is effected?
a) When any one module trips
b) When overload exceeds 175% for more than 40 msec. is existing.
c) When UPS output voltage varies beyond 415v +/- 10%
• When static bypass is fired? Why static bypass is required?
For the same above 3 conditions, static bypass is also simultaneously fired along
with a closing impulse.
• When the static bypass is blocked?
When the phase error is more than 20º.
• What is phase lock mode?
The inverter continuously follows the frequency and phase angle of classIII bus
supply.
• What is the difference between a contactor and a breaker?
Contactor is not designed to open on short circuit condition (fuse will take care of
this situation). Breaker is having complicated mechanism for closing and tripping.
• What is the difference between isolator and contactor?
Contactor is used for on load operation. Because they are fast acting devices. They
posses arc chamber and arc chutes. Arc chamber and arc chute make it easy to
extinguish the arc produced during on load operation.
Isolator is off load devices. Because they are slow acting devices. The arc time is
more in slow acting devices and operated only in off load.
• What are the protections provided for motor feeder?
Ith - Thermal over load
I2S - Unbalance load
I0S - Earth fault protection
I1t - Stalling protection
I1Inst. - Short circuit protection
• What are the protections provided in PMCC circuit breakers?
1. IDMT O/C (CDG 34).
2. IDMT E/F (CDG 11).
Question and answers Electrical Maintenance Unit
- 331 -
3. Under voltage (40% of 110V).
Question and answers Electrical Maintenance Unit
- 332 -
• What is requirement of having DG’s?
To establish class III supply when class IV fails.
Parallel operation with class IV 6.6 kV supply.
DG to DG parallel operation.
• What are the characteristics of CB, OLR and HRC Fuse?
CB characteristics (it is back up fuse)
Current
Fuse characteristics
Margin to avoid fuse operation OLR characteristics
During starting
Minimum fusing current
Staring current
Running current
Time
CB Protection
Fuse Protection
OLR Protection
I
Time
When CB is used the CB characteristics should be below the fuse, because the CB
should operate first and then fuse. Not vice-versa. Because CB is the main protection
or main breaking device.
• Why control transformer is earthed?
If it is not earthed grounding of control circuit at two different places can cause
bypassing of logics. In case of primary and secondary of the control transformer is
getting the main fuse will blow off. (If secondary is not grounded then 415v will be
superimposed in the control circuit during short circuit of primary and secondary
winding)
• When the fuse will take over?
When the current increases beyond 700% then the fuse will take over from the
thermal overload protection.
• What is interlocks provided for the valve MCC
Question and answers Electrical Maintenance Unit
- 333 -
a) Mechanical interlock, which will not allow the other contactor to close if one
contactor, is closed.
b) 42 auxiliary contacts are wired in the control ckt. 42-1 contact in 42-2 and 42-2
contact in 42-1.
Question and answers Electrical Maintenance Unit
- 334 -
• How to calculate the full load current of the motors?
If kW is given, full load current = 1.5 times kW rating.
If hp is given, full load current =2 times hp rating.
• What is the safety interlock provided in MCC cell?
The MCC cell door can't open if the cell is in on condition.
• How the fuse is selected?
Fuse rating should be 2.5 times the full load current.
• How will you improve the IR value of a motor?
By providing external heating. (By filament lamps)
By providing internal heating by applying the low voltage.
By circulating hot and dry air.
• Why 110V has been chosen in MCC cell?
To isolate control circuit from power circuit for Human safety at control circuit side.
• What is the purpose of DIODE across the interposing coils in PLC?
To dissipate the stored energy in magnetic field of the interposing coils (Free
wheeling action). If it is not provided the stored energy will affect the PLC card
circuit.
• What are the in-built protections provided in MCC cell?
Fuses for short circuit protection.
OLR for over load and single phasing protection.
Electrical and Mechanical interlock in valve cell against short circuit.
• What is the plugging of an induction motor?
It is an electrical braking of an induction motor by sudden reversal of phase
sequence.
• Why CT operated over load relay is using for loads of high acceleration time upto 30
seconds? How it getting back?
The saturable current transformers linearly transforms the current upto twice the set
current, but above this value the transformer core gets saturated and the secondary
current is proportionally less. Thus these relays permit heavy starting conditions of
motors and offer dependable protection against overload.
When current reduces the core gets de-saturated, as material design is such.
• How many earthing should be done for motors? Why?
Question and answers Electrical Maintenance Unit
- 335 -
Two. For reliability.
• What is the significance of frame size of motor?
In order to make practical choice, interchangeability and large scale production
possible.
Question and answers Electrical Maintenance Unit
- 336 -
• What is polarisation index?
a) It is defined as a ratio of 10 minutes resistance value to 1-minute resistance value.
b) It gives a quantitative information about the insulation with respect to moisture,
dirt and other contamination.
c) A PI value of less than 1.0 indicates a need for immediate reconditioning.
• Why megger value of 1 minute is less than 10-minute value?
After 10 minutes the high voltage applied make the molecules such a way that
stabilised in a good insulation. If insulation is weak it leads to more leakage current
due to high potential.
• What is the classification of duty of rotating electrical machines?
S1 – Continuous operation at rated load (MCR) in 40 °C
S2 – Short time operation (STR) for 5 minute or 15 minutes or 30 minutes.
S3 – Intermittent periodic operation (resting and loading e.g. cranes, lifts etc)
S4 – As for S3 but with starting
S5 – As for S3 with electric braking
S6 – Continuous cyclic operation.
• What should be the value of insulation resistance of induction motor?
In Rm = kV + 1 M OHMS.
Insulation resistance of any electrical machine (motor or generator) should be above
0.5-M ohms in all cases.
• What are the classes of insulation?
Y – 90οC (max) cotton, silk, paper, wood without oil impregnation
A – 105οC Materials of class Y impregnated with natural resins,insulating oils.
E – 120οC Synthetic resin enamels, cotton and proper laminations.
B – 130οC Mica, glass fibre, asbestos with suitable bonding substance.
F – 155οC Class B with more thermally resistant bonding materials.
H – 180οC Glass fibre and asbestos, mica with silicon resins.
C – >180οC Mica, ceramics, glass, quartz and asbestos without binders.
• What are the checks on the motor during the preventive maintenance?
IR Value
Resistance and Inductance measurement
PI value (should > 1.0)
• What are the tests pressures used in lyra contact testing?
125 A - 3 kg
250 A - 5 kg.
Question and answers Electrical Maintenance Unit
- 337 -
Question and answers Electrical Maintenance Unit
- 338 -
• What are the causes of motor vibration?
a) Broken rotor.
b) Slacked stator core.
c) Slacked rotor core.
d) Rotor winding unbalance.
• What are the causes for motor high current?
a) High frequency (51 Hz - 105% current)
b) Low frequency (48 Hz – 102% current)
c) High voltage
d) Low voltage
e) Mechanical over load
• What are the causes for motor unbalance current?
a) Loose connection
b) Voltage unbalance
c) Turns short circuit
• What are the sources of 240 V AC class I supply? What are the functions of each
part of UPS?
Six sources.
Three 20 kVA UPS for safety related loads.
Two 60 kVA UPS for non-safety related loads.
One 60 kVA UPS as a standby to safety related loads.
These all UPS are back up by 220V DC batteries.
Rectifier
This converts AC to DC supply for inverter.
Functions
1. Produces DC voltage.
2. Supplies trickle charge to batteries.
3. Full load boost charge capacity.
Inverter
This converts DC to AC supply for loads.
20 kVA inverter is transistor based and 60 kVA inverter is thyristor based.
Static switch.
To take stand by UPS into service.
Manual bypass
To take main UPS to maintenance by putting stand by UPS into service.
• What is station Black out condition?
Question and answers Electrical Maintenance Unit
- 339 -
Simultaneous failures of class IV and class III supply is called Station Black out. In
this condition class II power UPS will feed the necessary loads for a 30 minutes of
duration. After that supplementary control room (SCR) 5 kVA UPS is used for
secondary shut down system (SSS) ion chamber amplifier.
Question and answers Electrical Maintenance Unit
- 340 -
220 kV SYSTEM
• What is meant by Dielectric strength?
The maximum electrical potential gradient that a material can withstand without
rupture usually specified in volts/millimeter of thickness. This also has known as
electric strength.
• Give switchyard specification.
1. Type : Out door.
2. Scheme : Double main bus bar with bypass switching scheme is provided.
This allows maintenance of one bus or one CB without interruption.
3. Normal voltage : 220 kV.
4. Rated voltage : 245 kV (400 kV)
5. Impulse voltage : 1050 kV (peak)
6. One-minute level : 460 kV (rms.)
7. Dynamic current capacity: 102 kA (peak) and 40 kA for one sec.
8. Rated current capacity : 2000 A for main and 1600 A for feeder bus.
9. Clearances : Phase to earth – 2100 mm.
Phase to phase – 2100 mm.
Phase to ground – 5500 mm.
Sectional clearance – 4300 mm.
Creepage clearance – (Total) 5600 mm.
– (Protected) 2800 mm.
10. Maximum temperature rise above ambient - 45°C.
11. CB – SF6
12. Isolator – motor operated rotating type.
13. Number of bays – 16 Nos.
• Give the details of switchyard 220 kV CB, Isolator, CT, CVT and lightning arrestor.
220 kV SF6 Circuit Breaker
1. Make – ABB
2. Air pressure blocking a. Close Block – 17.3 bar.
b. Open block – 16.7 bar.
c. Auto reclose block – 19 bar.
3. SF6 pressure block a. Alarm – 5.2 bar.
b. Rated – 6 bar.
c. Limit – 5 to 6 bar.
d. Open block – 5 bar
4. Weight of gas / pole : 20 kgs.
5. Closing time : 130-milli sec.
6. Method of closing : Electro-pneumatic.
7. Compressor pressure : 20.5 kg/cm2.
Question and answers Electrical Maintenance Unit
- 341 -
Isolator
1. Type : High-pressure pressure relieving isolator (HPPR) central pole double
break.
2. CB and Isolator clearances : Phase to Phase – 4500 mm.
Phase to earth – 2300 mm.
Question and answers Electrical Maintenance Unit
- 342 -
Current transformer
1. Make : TELK made hermetically sealed.
2. Type : Single pole dead tank.
Capacitor voltage transformer (CVT)
This is capacitive potential divider and inductive medium mineral oil sealed.
ABB. make 245 kV/110 √3 V.
3 cores for metering and protection.
Lightning arrestor
Type : WS surge arrestor of ZODIVER type and SMX style.
Gapier zinc oxide arrestor. Multi unit construction for transport, storage and erection.
Rated voltage : 216 kV rms.
Operating voltage : 184 kV rms.
• For a fault in switchyard lightning arrestor, what protection will act?
Bus bar differential protection.
• What is the purpose of the CVT?
To provide synchronising signal
To provide voltage indication
To facilitate the carrier communication
• What is the purpose of wave trap?
Carrier communication signals are sent through the lines. These are high frequency
signals. This signal should be prevented from entering the switchyard. The wave trap
is LC ckt, which is tuned for 50 Hz. Since it is connected in series with the line it
will effectively block the carrier signal entering into the switchyard.
• What is the purpose of lightning arrestor?
Due to lightning and switching surges high voltages are induced in the lines. If
equipment’s. Connected is subjected to this high voltage the insulation will fail. In
order to avoid the failure of insulation the LA is used. When the la is subjected to
high voltage it will conduct and discharge the current to the earth.
(It will divert the over voltages to earth and protect the substation)
• What is meant by restriking voltage?
The high voltage that will appear across the contact just after the quenching of the
arc is called restriking voltage.
• What does switching surges mean?
Question and answers Electrical Maintenance Unit
- 343 -
When a line is switched on high voltage will appear on the line due to its inductance
and capacitance. This voltage is known as switching surges.
Question and answers Electrical Maintenance Unit
- 344 -
• What is the purpose of compressed air in SF6 breaker?
This used for drive for opening and closing of the contacts.
(Arc quenching is taken care by SF6 gas)
• Why switchyard is located indoors of coastal plants?
Saline atmosphere will deposit on the insulators causing its flashover. The building
kept under positive pressure compared with outside thus preventing the (saline) air
entering from outside to inside the building.
• Why disc insulators grooved at bottom?
To increase the creepage distance, reduce the chances of flash over.
• How cap and pin attached to insulator?
By cementing.
• What is the material of cap, pin, and insulator?
Cap = galvanised cast iron
Pin = forged steel pin
Insulator = porcelain.
• Why insulators are glazed?
If not glazed, it will absorbs water, resistance comes down, leakage current through
porcelain, temperature increases till porcelain is puncture
• What is the station ground resistance?
Less than 0.5 ohms.
• What is the various design of CT's in switchyard?
Bus coupler CT's- live tank design 2000-1000A/1A
All other CT's- dead tank design 800-600-400A/1A - lines and GT.
125A/1A – SUT
• Advantage of CVT over EMPT.
Used as coupling capacitors for PLCC.
• What are the main parts of 220 kV Circuit Breaker?
Pole column filled with SF6
Pneumatic drive system with compressed air circuit
Control cubicle unit
• What is the type of 220 kV circuit breaker?
220 kV, SF6 breaker, single pole, puffer type.
Question and answers Electrical Maintenance Unit
- 345 -
• What are the levels of SF6 gas in 220 kV breaker and their significance?
7 kg/cm2 - normal pressure
5.2 bar - alarm
5.0 bar - closing/tripping operation blocked.
Question and answers Electrical Maintenance Unit
- 346 -
• What is the difference between circuit breaker and isolator?
Isolator is a disconnecting switch which is not having the making and breaking
capacity.
Bus coupler - 2000A
Feeders - 1600 A
• What is the purpose of ground switch?
To discharge the trapped electrical charges to ground to give complete isolation.
(To discharge the residual potential)
• What is the type of Lightning Arrestor?
Station type, heavy duty, gap less zinc oxide.
• What is the purpose of grading ring?
This assembly is provided to have uniform voltage gradient.
• What are the properties of SF6 gas?
Physical properties
1. Colourless
2. Odorless
3. Non-toxic. Pure SF6 gas is not harmful to the health.
4. Non-inflammable.
5. Density- more gas density, 5 times that of air at 20°C and at atmospheric
pressure. The gas starts liquefying at certain low temperature. The temperature of
liquefaction depends on pressure. At 15 kg f / cm2 the gas starts liquefying at
10°C. Hence this gas is not suitable for high pressures >15 kg f / cm2
6. The heat transferability of SF6 gas is 2 to 2.5 times that of air at same pressure.
Hence for equal conductor size the current carrying capacity is relatively more.
Chemical properties
1. Stable upto 500°C.
2. Inert gas due to the chemical inertness. The life of the metallic parts, contacts is
longer in SF6 gas. The components do not get oxidised or deteriorated. Hence the
maintenance requirement is reduced. However moisture is very harmful to the
properties of the gas. In the presence of the moisture, hydrogen fluoride is formed
during arcing which can attract the metallic and insulating parts in the circuit
breaker.
3. Electro negative gas – Ability of an atom to attract means carrying a negative
electric charge.
These advantages offer increased safety, reduction in size, weight, noiseless
operation, easy installation, handling and maintenance.
Question and answers Electrical Maintenance Unit
- 347 -
• What are the protections are there for BUSBAR?
Instantaneous over current protection
Bus bar differential protection
Local breaker back up protection
Question and answers Electrical Maintenance Unit
- 348 -
• What are the protections are there for lines?
Directional earthfault protection
Directional over current protection
Local breaker back up protection
Pole discrepancy
Main protection (distance protection)
Directional OverCurrent Relay For Line-1&2
MICOM-P127
(This relay is in addition to the existing electro-mechanical directional O/C relay)
Setting Details
CTR= 600/1A
VTR= 220kV/110V
Directional Over Current Setting
Description Symbol in Relay Set value LED Indication
IDMT Directional over
current (Stage#1)
Secondary 1.33Amps Primary
(800Amps) TMS = 0.1 (67ABC)
Directional
O/C(Stage#2)
Secondary 3.33Amps
Primary (2000Amps)
Instantaneous.
(67ABC)
Directional
O/C(Stage#3)
Secondary 5Amps
Primary (3000Amps)
Instantaneous.
(67ABC)
Directional Earth Fault Current Setting
Description Symbol in Relay Set value LED Indication
IDMT Directional Earth
Fault current (Stage#1)
Secondary 0.2Amps Primary
(120Amps) TMS = 0.1 (67N)
Directional Earth Fault
(Stage#2)
Secondary 4Amps
Primary (2400Amps)
Instantaneous.
(67N)
Directional Earth Fault
(Stage#3)
Secondary 6Amps
Primary (3600Amps)
Instantaneous.
(67N)
Question and answers Electrical Maintenance Unit
- 349 -
MICOM-P127
Directional OverCurrent Relay For Line-3&4
Setting Details
CTR= 800/1A
VTR= 220kV/110V
Directional Over Current Setting as on 07/09/2002
Description Symbol in Relay Set value LED Indication
IDMT Directional over
current (Stage#1)
Secondary 1.0Amps Primary
(800Amps) TMS = 0.2 (67ABC)
Directional
O/C(Stage#2)
Secondary 0.94 Amps
Primary (750Amps)
Instantaneous.
(67ABC)
Directional
O/C(Stage#3)
Secondary 2.5Amps
Primary (2000Amps)
Instantaneous.
(67ABC)
Directional Earth Fault Current Setting
Description Symbol in Relay Set value LED Indication
IDMT Directional Earth
Fault current (Stage#1)
Secondary NOT USED
Primary TMS = (67N)
Directional Earth Fault
(Stage#2)
Secondary NOT USED
Primary
Instantaneous.
(67N)
Directional Earth Fault
(Stage#3)
Secondary NOT USED
Primary
Instantaneous.
(67N)
Question and answers Electrical Maintenance Unit
- 350 -
220KV SWITCH YARD LINES
DESCRIPTION LINE-01 LINE-02 LINE-03 LINE-04
REMARKS
LINE LENGTH
IN KM
13 16 62 62
CT RATIO 600/1 A 600/1 A 800/1 A 800/1 A
01 DISTANCE
RELAY
SETTINGS.(21)
Relay character QUAD QUAD LENT LENT
K1 1 2 4 4
K2 0 0 0.8 0.8
K3 32 32 N/A N/A
K4 0 1 4 4
K5 0.7 0.4 0.3 0.3
K6 0 0 0.02 0.02
K11 1 1 1 1
K12 0.6 0 0.3 0.3
K13 0.08 0.04 0.02 0.02
K14/24 1 1 1 1
K15 1 1 1 1
K21 4 2 2 2
K22 0.5 0.6 0.5 0.5
K31 6 3 4 4
K32 0.9 0.9 0.5 0.5
K33 1 1 1 1
K35 1 1 2 2
K36 0 0.2 0.7 0.7
K37 1 0.5 0.25 0.25
A/b N/A N/A 1 1
Z-2 TIME(m sec) Inst. Inst. 400 400
Z-3 TIME(m sec) 120 120 800 800
L#2- Z-2 & Z-3
changed on
18/6/02 & L#1 on
21/06/02
Tp ALL LEFT ALL LEFT ALL LEFT ALL LEFT
Td ALL LEFT ALL LEFT ALL LEFT ALL LEFT
SW-1 RIGHT RIGHT RIGHT RIGHT
SW-2 LEFT LEFT LEFT LEFT
SW-3 RIGHT RIGHT RIGHT RIGHT
SW-4 RIGHT RIGHT RIGHT RIGHT
SW-5 RIGHT RIGHT RIGHT RIGHT
SW-6 RIGHT RIGHT RIGHT RIGHT
SW-7 LEFT LEFT LEFT LEFT
SW-8 LEFT LEFT LEFT LEFT
SW-9 RIGHT RIGHT RIGHT RIGHT
Z-1 LEFT LEFT LEFT LEFT
Z-2 LEFT LEFT LEFT LEFT
Z-3 RIGHT RIGHT RIGHT RIGHT
ANGLE (Ph-Ph) 80 80 85 85
ANGLE (Ph-N) 80 80 75 75
TEST OPTION 0 0 0 0
Question and answers Electrical Maintenance Unit
- 351 -
DESCRIPTION LINE-01 LINE-02 LINE-03 LINE-04 REMARKS
2 DIRECTIONAL
OVER CURRENT
(67 A,B,C.)
CT RATIO 600/1 A 600/1 A 800/1 A 800/1 A L#2 Settings
changed on
18/6/02 & L#1 on
21/6/02
PSM 1.25 (750A) 1.25 (750A) 1.0 (800A) 1.0 (800A)
TMS 0.1 0.1 0.2 0.2
High set 5A 5A 5A 5A
L#2 Settings
changed on
18/6/02 & L#1 on
21/6/02
3 DIRECTIONAL
EARTH FAULT
(67N)
PSM 0.2A 0.2A 20%(0.2A) 20%(0.2)
TMS 0.1 0.1 0.225 0.225
High set 2A 2A 400%(4A) 400%(4A)
L#2 Settings
changed on
18/6/02 & L#1 on
21/6/02
4 LBB
PROTECTION
(50Z)
PSM 0.2 0.2 0.2 0.2
KNOB 1 1 1 1
2/50Z 0.25 sec 0.25 sec 0.25 sec 0.25 sec
5 POLE
DISCRIPENCY
(47)
2/47T 0.1 sec 0.1 sec 0.1 sec 0.1 sec
6 ISOLATOR
PARALLEL(29)
TIMER(29) 25 sec 25 sec 25 sec 25 sec
7 POWER RELAY
(32)
PSM N/A N/A 10 ma 10 ma
TIME N/A N/A 0 0
8 INST, OVER
CURRENT
RELAY
(50A,,B,C.)
KNOB N/A N/A 94% 94%
2/50 ABC N/A N/A MIN. sec MIN. sec
Question and answers Electrical Maintenance Unit
- 352 -
BATTERIES
• What are the disadvantages of the maintenance free battery?
The life of battery is only five years.
The state of charge of a battery not knowing by the specific gravity of a battery. We
can know by voltage only.
• What are the problems of hydrogen concentration?
If the concentration of hydrogen more than 4% and less than 74% explosion
problems will be there. Therefore the concentration of hydrogen is restricted to less
than 1% by air changer ventilation system.
• Why lead acid battery requires so much large initial charging?
Initially for a new battery, negative plate will be PbO instead of Pb. To convert all of
them back to Pb, we need so much prolonged initial charging.
• What are the protections adopted in UPS or PMCC supply?
LV (incomer) or UPS input
CTZM, Over current, Short circuit protections
PMCC S or T input or UPS output
Under voltage (27), 51RYB, 51N protections.
• Write chemical equation for lead acid cell.
PbO2 + H2 SO4 􀃆 PbSO4 +2 H2 (during discharge)
Pb + SO4 􀃆 PbSO4 (during charge)
• Is the chemical reaction of plante cells same as tubular lead acid cells?
No. Plante cells having both electrodes are lead (Pb) only.
During charging, H2O 􀃆 H2 + O2
O2 react with Pb to form PbO2 + (+ve plate)
During discharge, Pb + c 􀃆PbSO4 (on -ve plate)
While PbO2 􀃆 Pb + O2 (on +ve plate).
That is converted back to lead.
Therefore PbSO4 formed only on -ve plate. That is sulphation problem are reduced
by 50%
• What are the advantages of plante type batteries?
Plante plate type batteries have longer life and can with stand rapid discharge.
• Why battery room should be located separately in a power station?
Possibility of battery explosion
Corrosive atmosphere by acid spray.
Fire hazard.
Question and answers Electrical Maintenance Unit
- 353 -
• What are the disadvantages of nickel cadmium battery?
Status of charge not known
Number of cells are more
Cost very high
Environmental protection agency considers cadmium as a hazardous material,
difficult to discard at the end of life.
• What are the effects of temperature in lead acid battery?
Higher electrolyte temp - ah capacity increases but life reduces.
Lower electrolytic temp - ah capacity reduces since chemical reaction rate reduces.
• Why ventilation is essential for Ni-Cad also?
Gases evolved H2 O2 can form explosive mixture.
• How H2 O2 generated in lead acid battery?
At end of charge, when most of the Pb is converted. H2 O2 generated from H2O. O2
appears as gas at positive plate. H2 at negative plate, i.e. gassing starts.
• Why current reduced after gassing?
Excessive gassing shortens the life of battery by scouring the active materials at the
surface of the plates.
• Why aged battery consumes more water?
As aging increases, antimony migrates to negative plate 􀃆 secondary cell reaction.
Therefore more charging current require 􀃆 more water consumption.
• What happens after aging?
Shedding of active material during charging.
Shedding increases with overcharging, heavy discharge, batteries short ckt.
• What is the other effect of low temperature?
When specific gravity decreases, acid freezing point increases, soon reached at low
temperature, volume increases container cracks.
• Why temperature correction required?
As temperature increases, specific gravity decreases. The hydrometer immersion is
more, showing lower readings. Therefore 10ºC raises, 7 points to be added,
corrected to get 27 ºC reading.
• What is meant by sulphation of the cell?
Question and answers Electrical Maintenance Unit
- 354 -
During the discharge lead sulphate is produced and during the charging the same is
converted back into lead and lead peroxide. If the cell is left under charged, lead
sulphate would form which will not reverse back into lead and lead peroxide during
charging. Due to this the cell will loose its original capacity.
Question and answers Electrical Maintenance Unit
- 355 -
• What you meant by shedding?
During the charging and discharging the active materials will undergo volumetric
changes. Due to this some of the material may not be retained with the parent
material and will shed and collected at the bottom of the container. This loss of
active material is called shedding. Due to this the cell will loose its capacity.
• Acid should be poured to water. Why is it so?
When acid and water is mixed lot of heat is generated. Hence there is chances of
splashing of the liquid. If water is poured to acid will splash causing injuries. In the
other case splashing will be of water with concentration of acid, which will not
hazardous as the other one.
• What types of lighting fittings are used in the battery room?
Flame proof acid resistant
• Why ungrounded 250V DC system adopted in our system?
The 250V DC system is feeding to some of the vital loads such as breaker control
etc. Even if one ground has occurred then also these controls should be available.
Continuous monitoring of ground current is employed to eliminate the by passing of
logic due to double ground.
• Why battery capacity limits to 20 minute?
Battery cost is more.
It is better to restore class 3 faster by DG set then putting large battery.
20 min, is enough to shutdown the unit safely.
• What are the main parts of lead acid battery?
a. Container
b. Lead dioxide positive plates
c. Lead negative plates
d. Post strap and seal assemble
e. Separators and retainers
f. Sulphuric acid electrolyte
g. Inter cell connector (lead plated copper)
• What are the different types of charging?
(Normally always) Float charging – 2.15V per cell
It maintains the battery fully charged condition during standby operation by
delivering a small amount of current to cancel the effect of battery natural selfdischarge.
Equalizing charging (2.7V/cell) once in 3 months
Question and answers Electrical Maintenance Unit
- 356 -
Recharge a battery capacity through recovering all useable active materials in the
cell plates.
Boost charging
Boost charging is a quick charging process, which is generally required, if the battery
is drained to a large extent.
Question and answers Electrical Maintenance Unit
- 357 -
• What is the double sulphate reaction?
Pb O2 + Pb + 2H2 SO4 ↔ 2PbSO4 +2H2O
During charging oxygen at positive plate and hydrogen at negative plate are
releasing.
• What are the effects of over charging?
Gassing
Heating
Loosening of plate active material
• What you mean by Drooping characteristics of charger?
When the charger is connected to excess load of charger rating the charger should
able to supply the load with out over loaded by maintaining the terminal voltage
within limit without over load trip. This called a drooping output voltage
characteristics.
• What are the effects of under charging?
Sulphation
Buckling of plates
• What are the effects of high temperature?
Gassing of electrolyte and evaporation
Service life is halved for every 8 deg increase above 25 deg.
• What are the effects of low temperature?
Increased electrolyte viscosity.
• What type of thermometer is used for acid batteries?
Alcohol type thermometer.
• What are the tests for battery?
Conduct test – to check the capacity batteries
Impedance test – to check the utilization of active materials.
• What are the functions of charger?
1. For initial charging.
2. For float charging.
3. For battery equalizing charging.
4. For battery boost charging.
5. To supply normal DC loads.
Question and answers Electrical Maintenance Unit
- 358 -
• What is the rating of switchyard battery charger and batteries?
Switchyard is having Float cum boost charger of 282 V DC maximum and 100
Amps rated charger of six-pulse full wave thyristerised controlled rectifier.
Batteries are tubular 220 V DC. +ve plate is made up of low antimory lead selenium
(Pb) and –ve plate is made up of paste plate type (O2). Container or tube is made up
of polyester and glass fibre.
1. Momentary load 160 A / minute.
2. Continuous load 40 A / hour.
3. Cell voltage 1.8 V DC and total number of cells are 106 in battery bank.
4. Float voltage 2.16 V per cell to 2.18 V per cell.
5. Maximum system voltage is 106 * 2.18 = 242 V DC
Battery rated for 224 A for one minute or 80 A for 60 minutes.
Specific gravity 1110 ± 5 and specific gravity after 10 hrs discharge is 1150 ± 5.
• What are the protections provided in charger?
1. Over load (49).
2. Over voltage (59).
3. Short-circuit (3250 Amps).
4. Phase sequence and phase fail.
5. di/dt and dv/dt protection.
Question and answers Electrical Maintenance Unit
- 359 -
CIRCUIT BREAKER
• Give circuit breaker nameplate details of 6.6 kV, and 415 V.
6.6 kV (SF6 circuit Breaker) 415 V (Air Circuit Breaker)
Type HPA12/1240C(Tr./ PM) 812 (MCC/UPS)
HPA12/2040C(Tr./ PM) 610 (Tie/PM/MCC)
3037 (B/c, Incomer)
Standard IEC 56
Rated voltage 12 kV (6.6 kV) 415 V
Insulation level 28 / 75 kV 660 V
Rated current 1250A/2000A 1600A/1000A/3750A
Breaking current 40 kA 50 kA (rms.)
Making current 100 kA 105 kA (peak)
Short ckt withstand 40 kA/sec 50 kA/sec
Closing time 52 milli sec 60 sec (III/IV) & 30 sec (II)
Opening time 75 milli sec 35 sec (III/IV) & 40 sec (II)
SF6 pressure 2.3 - 2.8 bar (2.2 alarm) at 20°C
Sliding contact Copper with silver of 10 microns
• What are the difference between DCCB and ACCB?
DCCB
Two poles seriesed for one side.
Breaker is adequately de-rated for use in dc circuits.
Only DINF, DIRS provided. DIT 5 will not work for dc.
In GFB, magnetic blowout coils used to increase the speed of rise of arc into the arc
chutes for effective quenching.
ACCB
The inherent current zero of sine wave helps arc quenching. For DCCB arc
quenching is difficult, since current zero is not existing naturally.
• What are the indications used in 415V and 6.6 kV breakers panel?
415 V Breaker 6.6 kV Breaker
Open Green Green
Close Red Red
Test White
Service Blue
Auto trip Yellow White
Spring charge Blue
Gas pressure Yellow
Voltage (RYB) Red
Question and answers Electrical Maintenance Unit
- 360 -
Question and answers Electrical Maintenance Unit
- 361 -
• What are the advantages and disadvantages of 415V English Electric breaker?
Advantages
1. Auto reclosing shutters.
2. Proven wiping contacts.
3. Sturdy rugged mechanism.
4. Reliable aux. Switches contacts.
5. Slow closing facility independent of closing spring.
Disadvantages
Bulky, more space, spring charge motor 5A. , Spring charging time 14 sec 4 sec at
timing, trip extends in test position also. No neutral bus bar link, we cannot finger
contact resistance since fixed on bus side.
• Type of closing spring is compression type.(415V)
• Why parallel operations of classIII buses are not permitted?
Fault on one side affects the other buses, switchgear fault level rating is exceeded.
• Why auto transfer is blocked for back up protection?
Because Backup protection operates normally for bus faults. All main protections are
generally operating for internal faults therefore there is no point in restoring the
power supply through auto transfer when there is a bus fault existing.
• What decides the control transformer VA rating?
Contactor coil VA rating.
• Can we use AC contactor in DC circuit?
Yes, but with adequate de-rating.
• Can we use ac coils in dc circuit?
Yes with economy resistor in series.
• Why shading rings provided in armature core of ac contactor. Why not for dc
contactor?
Because the force developed is not steady in ac therefore contacts will chatter but if
shading ring is used force developed becomes steady due to splitting of phases of
flux, therefore contacts becomes bounce free and humming sound reduces.
• Why copper contact are not used in contactor?
Because corrosion rate increases. Poor surface property , large closing force
required.
Question and answers Electrical Maintenance Unit
- 362 -
• Why pure silver is not used in contactor?
Affected by sulphur, mechanical or arcing damages (adv. Lower voltage drop)
Question and answers Electrical Maintenance Unit
- 363 -
• What are the types of contactors?
Type Contacts Rating Use
3 TB 41 2 NO + 2 NC 12 A 0 – 5.5 kW
3 TA 22 2 NO + 2 NC 30 A 7.5 – 11 kW
3 TA 13 2 NO + 2 NC 38 A 15 kW
3 TA 24 4 NO + 2 NC 70 A 18 – 38 kW
3 TA 16 4 NO + 2 NC 105 A 40 – 48 kW
3 TA 28 4 NO + 2 NC 170 A 55 – 80 kW
3 TA 28 3 NO + 3 NC 170 A 55 – 80 kW
3 TB 56 4 NO + 2 NC 400 A 93 kW for F/M supply PM.
3 TD 11 2 NO + 2 NC 12 A 0 – 1.5 kW for valve motors.
3 T I 22 2 NO + 2 NC 30 A 1.6 – 7.5 kW for valve motors.
• What material used for contactor?
Silver-nickel for <100A
Silver-cadmium oxide for large currents.
• Why pick up voltage is more than drop out voltage?
Initially air gap is more. Large force is required to overcome the high reluctance
initially. After closing air gap is reduced. Hence drop voltage is reduced.
• Can we file the pitted contacts of contactor?
No, use emery paper and etc.
• How the contact resistance can increase?
Humidity + salty air, dust, poor contact pressure
• Fusing current- the current at which the fuse element melts depends upon the
material, length and diameter.
• Fusing factor- fusing current /rated current (1.25 -1.75)
• Prospective fault current – first loop of fault current
• Cut off current - actual peak value of current reached due to interruption by fuse
blowing.
• What is rated current and short circuit current?
Rated current = VA / √3 * V Amps.
Short circuit current = VA * 100 / %Z * √3 * V Amps.
• What is the advantage of lower cut off current?
Question and answers Electrical Maintenance Unit
- 364 -
Less electromagnetic forces on contactor / CB’s
• How two fuses in-series are discriminated?
Total I2t of minor fuse should be less than pre-arcing I2t of major fuse.
Major fuse should be greater than 1.5 times the minor fuse.
Question and answers Electrical Maintenance Unit
- 365 -
• Why OLR time set high for belt driven fans?
Because acceleration time is high.
• What is the safety reason to keep the contactor / MCC remote from motor?
Contactor = sparking equipment. Not suiting for hazardous location.
• Where wound type CT used and where not used?
Used where low CT ratio req.
Not used where high short ckt. Current exists.
• What is advantage of cast resin CT’s?
Can withstand bursting forces under short ckt, protect damages against external
causes impervious to moisture.
• Why fuses with fusing factor more than 1.5 is not allowed in PVC cables?
Because PVC cables have low thermal capacity than paper cables. Full loading of
PVC only possible if it has close excess current protection (i.e.) Fusing Factor = 1.5
Question and answers Electrical Maintenance Unit
- 366 -
• What are the advantages of HRC fuses re-wirable fuses? What are the characteristics
of HRC fuse?
1. Consistent and stable characteristics for accuracy of discrimination. Capacity
to break at high and low current. It is inverse time characteristics, as the
current is high the time taken to break the circuit is less.
2. Arc quenching is reliable. Chemical action between quartz and arc gas gives
high resistance to the arc. Quartz does not produce more gas after observing
heat as its sand powder observes more heat of the arc.
3. Non deteriorating since it is sealed. No maintenance, Cheap and indication is
available.
Characteristics
1. I2t characteristics. This determines the energy that element can pass and to
determine the cut off characteristics.
105 Total I2t
104
103
102 Pre-arcing I2t
10
10 50 100 150 200
Fuse rating
2. Inverse time characteristics, which is useful for selection of the fuse for motor.
75
50
Current
20
10
0.2 0.5 0.7 0.9 1 sec
Time
Inverse time characteristics
Current
Fuse characteristics
Margin to avoid fuse operation
During starting
Minimum fusing current
Question and answers Electrical Maintenance Unit
- 367 -
Staring current
Running current
Time
Motor selection characteristics
Question and answers Electrical Maintenance Unit
- 368 -
• What is the advantage of CMM relay over normal Inv. O/C current relay?
Inv. O/C relay under protects at low current and over protects at high currents.
CMM: accounts for both +ve and –ve sequence currents i.e. Single phasing /
unbalance supply conditions and gives three times more weightage for the –ve phase
sequence current heating than + ve sequence current heating. i.e. Net rotor heating =
I1
2 + 3 I2
2.
Therefore CMM relay protection characteristic is closely matched to motor heating
characteristic. So it is better than thermal overload relay also.
• What is the purpose of anti-pumping relay?
When closing signal is continuously existing even after the closing of the breaker the
anti-pumping relay will be picked up and it will not allow the breaker to close back
in case of tripping of the breaker.
• Why breaker tripping is prohibited on very low pressure?
The efficiency with which the arc quenching is taking place in the breaker depends
on the air pressure. So if the air pressure is low effective arc quenching will not take
place which will result in damage of CB. Hence the tripping of the breaker at very
low air pressure is prevented.
• Why neutral breaker used in DG neutral grounding?
In case of high earth fault currents it is therefore normal practice to install a circuit
breaker in the neutral of the generator in order to reduce the total fault clearance
time.
• What are the protections used in Class III & Class IV 415 V LV side?
Class III 415 V LV side
1. 51 (inverse over current)
2. 50 (instantaneous over current)
3. 27 (under voltage)
4. 51N (earth fault)
5. 64 (REF)
Class IV 415 V LV side
1. 51 RYB (inverse over current)
2. 51N (earth fault)
Question and answers Electrical Maintenance Unit
- 369 -
• What are the protections used in 415 V Class II side?
LV to UPS
1. CTZM
2. 50 (instantaneous over current)
3. short circuit
UPS to PMCC S & T
1. 51 RYB (inverse over current)
2. 27 (under voltage)
3. 51N (earth fault)
From Class III to Class II tie
CTZM at Class III and 51, 51N at Class II.
• Define the followings.
Insulation level – it is the combination of rated voltage, the corresponding impulse
withstand voltage, which together characterize the insulation of the equipment as
regards its ability to withstand the electrical stresses.
Rated short circuit breaking current – it is the highest RMS value of short circuit
current which the circuit breaker is capable of breaking the circuit in safe.
Making current – it is the peak value of first loop of current of short circuit current
which the circuit breaker is capable of making at the rated voltage.
Rated making current = 2.5 times rated breaking current.
Short time rating – it is the RMS value of current that the circuit breaker can carry in
a fully closed position during a specified time.
Impulse withstand voltage – it is the amplitude of the standard voltage wave with the
insulation of equipment can withstand.
Power frequency withstand voltage – it is RMS value of alternating voltage wave of
power frequency (50 Hz) which the insulation of equipment should withstand.
• What is switchgear?
Equipment which is used for switching, controlling and protecting an electrical
circuit.
Question and answers Electrical Maintenance Unit
- 370 -
• Bus bar specifications of 6.6kV and 415 V.
415V
Aluminium 200 X 12mm
2 nos. per phase, 1 no. for neutral
Bus bar joints – silver plated to 5 micron thick (tightness 50 NM)
6.6kV
Copper
Silver coated joints
Insulation level – 27kV
Fault level estimated – 27kA Designed – 40kA
• What is the type of arc extinction in switchgears?
415V – resistance method (through arc splitter)
6.6kV – single puffer principle
• How Arc quenching is done?
When fault occurs depending on design element melts at one point and arc starts and
a transient current is super imposed on prospective current. When the sum of two is
zeroing the arc is quenching.
• What is lock out relay?
It is the relay to prevent the closing of circuit breaker after tripping (protection)
without attention of the operator.
• What is the significance of SF6 gas pressure in 6.6kV breakers?
Density gauge
Green – correct SF6 pressure (3 –3.5bar)
Yellow – pressure for breaking system fault current (refilling should be done)
Red – SF6 pressure less than 2 bar, which indicates leak in the system.
• What is the measure of atmospheric pressure and PSI?
1 Atmospheric pressure = 1.033 kg/cm2.
1 PSI = 0.07031 kg/cm2.
• What is the distribution of DC control supply in CL IV, III, II- 415V and 6.6 kV?
Closing coil and Trip coil 2 supply from one source.
Trip coil 1 supply from one source.
Protections supply from one source.
• Why 86.1 and 86.2 relays are used?
Question and answers Electrical Maintenance Unit
- 371 -
All electrical protection is wired to 86.1 and under voltage protection is wired to 86.2
relay for automatic restoration in EMTR.
Question and answers Electrical Maintenance Unit
- 372 -
• What is the difference between lockout of 6.6 kV and 415 V CB’s?
Voltage levels.
Manual / auto reset.
Lockout relays of 415 V breakers are all Electro-magnetic type. There is no
mechanical latch. But in 6.6 kV it is of mechanical latch type relays.
• If breaker contact resistance is more what action to be taken?
In 6.6 kV breakers 1250 A breaker contact resistance is <100 μς.
2000 A breaker contact resistance is <50 μς.
If contact resistance is found more than this value should be sent to the manufacturer
for repair.
• What are the interlocks between 415 V and 6.6 kV switch gear?
6.6 kV
Breaker closed cannot rack in or out.
Service lever cannot move while breaker closed.
Breaker cannot be closed in in-between position.
415 V
Breaker door cannot be opened when breaker is in service.
Breaker cannot be closed in in-between position.
Breaker closed cannot be rack in or out.
• Where are the provision of GR-A and GR-B tie possibilities?
Bus D1-D2 to E1-E2 (CL III 6.6 kV)
Bus X to Bus Y (CL III 415V)
Bus S to Bus T (CL II 415 V)
• What are the properties of SF6 gas?
This is inert gas. Odorless, non-toxic, colourless, stable, non-inflammable and
density is more hence high dielectric strength. The special property of this gas is
Electro negativity. This gas attracts electrons to form –ve ions and –ve ion are havier
than electrons and more slow in conduction, so that resistance in medium is increases
and get arc get extinguishes.
Question and answers Electrical Maintenance Unit
- 373 -
Question and answers Electrical Maintenance Unit
- 374 -
CABLES
• What are the purposes of cable trays?
a. Avoid sagging of cables
b. Give mechanical support
• What are the disadvantages of paper insulation?
a. Absorbs moisture.
b. Cable termination/sealing problems.
• What are the advantages of XLPE?
a. Easy routing at heights
b. Easy maintenance
c. Large current (90 ºC)
d. No sheath (no fatigue)
e. No paper tape wrapping technique
f. High dielectric strength
g. Very little deformation even at high temp,
h. More rated current, overload, short ckt capacity
i. Low tan delta and hence suits long routes
j. Very light
k. Good mechanical properties.
• What is the specified cable life?
50 years.
• How armours /sheaths grounded?
1 core cables -- sheaths/shields/armours grounded at one end only, other end
insulated to prevent the circulating current through sheaths.
3 core cables -- grounded at both ends but not including core balance CT’s, since
even small induced current causes 50N operation.
• Why armouring done?
For mechanical strength, protect against damage by impact of an object.
• How the required conductor size can be reduced by use of HRC fuses?
HRC fuse limits the peak amplitude of fault current. HRC fuse melts at prospective
current but not allows circuit to pass their high rupturing capacity that is it’s kA.
Question and answers Electrical Maintenance Unit
- 375 -
• What are the types of cables used in 6.6 kV and 415 V system voltages?
In 6.6 kV system AC (unearthed) grade having stranded aluminium conductors
cables are used. Their insulation’s are as follows.
1. XLPE – Crossed linked polyethylene insulation.
2. FRLS PVC – Fire retardant low smoke insulation with PVC inner and outer
insulation. In RB copper conductor stranded cables are used.
3. FS – fire survival insulation.
4. HR PVC – heat resistant insulation.
In 415 V system 1100 V grade copper or aluminium stranded cables are used. Their
insulations are HR PVC and FS type.
• At what temperature cables are rated?
Normally cables are rated for 40°C
Maximum temp in °C Short time temp in °C
PVC 70 160
HRPVC 85 160
Fire survival 90 250
Silicon rubber 90 250
XLPE cable 90 250
• Why 1.1 kV grade cables used for 415V?
To take care of the both earthed / unearthed systems.
• While carrying out cable joints, why should we ensure the continuity of 1) metallised
paper for PILC, 2) sheath and armour.
Continuity of metallised paper ensures less voltage gradient, hence preventing
puncture of insulation.
Continuity of sheath / armour ensures that grounding is maintained, so no over
voltage is induced, and easy to detect earthfault in cables.
• Why bimetallic washers provided in aluminium copper transition joints?
To avoid galvanic corrosion failure.
• What is the type cable used in radiation areas?
Mineral insulated (MI) cables.
Question and answers Electrical Maintenance Unit
- 376 -
Question and answers Electrical Maintenance Unit
- 377 -
EMTR AND AUTO TRANSFER
• What is meant by EMTR?
In case of normal supply failure to CL-III & CL-II the loads will be fed by the
alternative/standby sources. This changeover of supply is called Emergency
Transfer.
• How EMTR is initiated?
EMTR is initiated on sensing the CL-III & CL-II bus under voltage.
• What are the routes of EMTR?
CL-III bus under voltage. The DG’s will start. All the breakers connected to the
affected bus will trip. DG breaker will close on dead bus. Loads will be restored one
by one.
CL-II bus under voltage. The tie breaker of the affected bus will close.
• What does load-shedding mean?
When there is only one source to feed the two buses, the total loads can not be fed by
this single source. Hence some of the less important load will not be allowed to start
or it will be tripped if it is running.
• What does total load-shedding mean?
Even after the load shedding the is continue to deliver more than the rated power
sensed by overpower relay or running with under frequency sensed by the under
frequency relay the total load shedding will take place. In case of auxiliary
transformer is feeding the total load shedding will take place after 4 minutes.
• What does auto transfer mean?
If one of the sources is tripped on main protection its breaker will be tripped and the
tie-breaker will close. This transfer of supply from one source to other source is
called auto transfer. To restore the class IV whenever the UT or SUT is lost Auto
transfer is provided.
• Why auto transfer is prevented if the backup protection is operated?
The back up protection is supposed to operate in case of a bus fault. Hence the auto
transfer is prevented.
• What are the types Auto transfer scheme?
1. Fast transfer scheme to close the tie-breaker in less than 200 milli seconds. This
limits transient current and voltage dip in the bus and does quick acceleration of
the motors.
Question and answers Electrical Maintenance Unit
- 378 -
2. Slow transfer after 200 milli seconds.
Question and answers Electrical Maintenance Unit
- 379 -
• What are the conditions for Auto transfer scheme?
Backup protections are not allowed to initiate the Auto transfer. Because under
voltage may exist in the bus. Similarly protection in LV of the transformers are not
initiating the Auto transfer scheme. There are three metrics used in Auto transfer
scheme and 2/3 logic is adopted.
Conditions
1. Fault generator (86BG or 86A1).
2. Fault in UT.
3. Fault in GT.
4. Fault in 220 kV bus (SUT).
5. Fault in SUT (86M).
• What are the uses of EMTR scheme?
1. To restore class III when class IV supply fails.
2. To extend supply to class II when UPS fails.
3. In one DG condition to load restoration.
4. Sub sequent restoration of large motor loads.
• What are the sequences of motor load restoration in EMTR?
1. AHPPW –1001 - 4 Sec.
2. APWC – 1003 - 8 Sec.
3. APWC – 1004 - 12 Sec.
4. AHPPW –1002 - 16 Sec.
5. PPP – 1001 - 20 Sec.
6. MOD – 1002 - 24 Sec.
7. MOD – 1001 - 28 Sec.
8. Air Comp – 1002 - 32 Sec.
9. ABFP – 1006 - 36 Sec.
10. 7343 Exst Fan 1003 - 40 Sec.
11. ECCS PM 1001 - 44 Sec.
12. ECCS PM 1002 - 48 Sec.
• Why synchronizing scheme has been adopted? What are interlocks provided?
To check running and incoming buses, which are going to be interconnected are in
synchronism with each other.
Interlocks
1. Synch selector.
2. Only one breaker can operate at a time.
3. Master synch relay contact should available (bypass will bypass this synch
contact).
Bypass facility is provided to close the breaker on dead bus only.
Question and answers Electrical Maintenance Unit
- 380 -
• What are the settings provided in synchronizing scheme (SKE Relay)?
Voltage – V1- V2 = 10%
Frequency – t = 0.05 Sec (2.5 Hz)
% Slip – 0.45
Phase angle difference - 20°.
Question and answers Electrical Maintenance Unit
- 381 -
• What are the major losses in nuclear power generating system?
Condenser - 500 MW.
Moderator - 40 MW.
C/V and E/S system - 3.7 MW.
• Give the specification of DG and NGR of DG.
DG specification
Type HSPTL 12/653 synchronous generator.
KVA 2815
Volts 6600 V
Amps 246 A
Phase 3
Frequency 50 Hz
Insulation Class-F
PF 0.8
Duty S1
IC 01
IP 23
RPM 1000
Exciter 110 V, 3.2 A (Brush – less of permanent magnet, electronic
automatic voltage regulator)
Ambient temp 50°C
NGR specification
Resistance at 20°C 95.3Ω
Voltage 6.6 kV/√3
Insulation class 7.2 kV
Transient current 40 A / second.
Continuous rating 10 Amps.
• What is the operational requirement of DG’s?
1. Whenever class IV fails DG sets (2 + 1 standby) are started by EMTR and capable
of restoring class III loads within 30 Seconds. One example is given below.
Event Minutes Seconds Milli seconds Difference
Class IV fail 00 00 280 00:00:280
EMTR initiate 00 01 303 00:01:023
DG start (1, 2, 3) 00 01 336 00:00:033
Voltage, Speed reached 00 07 257 00:05:921
CB 351, 361, 370 Closed 00 07 491 00:00:234
Question and answers Electrical Maintenance Unit
- 382 -
Restoration will be done in 07 seconds and 491 milli seconds. After this to build up
power and frequency it takes about 1 minute 26 seconds and 852 milli seconds. Then
load restoration starts as per EMTR scheme.
2. DG’s are capable of paralleling with 6.6 kV class IV supplies.
3. DG’s are capable of paralleling with each other.
Question and answers Electrical Maintenance Unit
- 383 -
• What are the design criteria’s of DG’s?
1. 4000 starts and 4000 hrs run at full load for lifetime.
2. Operation at 45°C and high atmospheric condition.
3. Designed to run in earthquake and seismic condition.
4. Designed to start as per EMTR scheme and take load as per EMTR and load
shedding scheme in one-DG condition without drop in voltage or frequency 25%
and 5% respectively.
5. Designed for run in high speed and to build up voltage and speed within 10
seconds.
6. Designed to start and loading with external row water for cooling for 3 minutes.
7. Designed to start at normal and load condition temperature.
8. Designed to run at no load for 4 hrs in a 4 months with affecting the load and over
load.
9. Designed to supply power in one-DG condition.
10. Continuous supply is 2250 kW and can run at 2475 kW for 2 hrs in 24 hrs at 6.6
kV and 0.8 PF.
11. Designed to start and stop at 48 V DC supply and stop at 220 V DC in the case of
48 V DC is not available.
12. DG – 3 is physically separated for control and installed at adjacent unit. Because
in case of unit is not avail then for cooling water is available in other unit.
13. Monorail of 3 Ton is provided.
14. Provisions are made for filtered air and ventilation and combustion.
15. Co2 fire fighting system is provided for smoothening effect in case of fire.
16. Active process water from class III is provided.
• What are the auxiliaries required for DG?
1. Starting air system.
Components are compressor, air dryer, air receiver, solenoid valve for start
control, pneumatic starting air valve, air distributor and injection valve at each
cylinder.
This system operates at high pressure and also provided with soft start of 8-bar
pressure in testing of system periodically.
2. Lub oil system.
This is closed loop of having oil sump of capacity of 7 days at full load. This also
supplies oil to bearing lubrication, crankshaft, piston, and wiper.
This closed loop Circuit includes pre-lubricating circuit and normal lubricating
circuit. Pre- lubricating circuit is controlled by PLC, but at first commissioning
and overhauling pre-lub start immediately.
3. Water cooling system.
Question and answers Electrical Maintenance Unit
- 384 -
This is provided with closed loop fresh water for remove heat from lubricating oil
system, charge air cooler, engine components (cylinder lines, cylinder head etc).
Fresh water chemistry is controlled to avoid organic growth and corrosion. This
water is heated for normal operation to avoid thermal shock. This water is cooled
by active process water. One tank is provided to transfer fresh water to the
system. Before transferring fresh water chemical addition should be done.
4. Fuel oil system.
The engine driven fuel oil pump is flooded with fuel oil from the day tank by
gravity. Low-pressure fuel from fuel pump is supplied to individual injection
pump is injected to individual cylinders through injectors.
5. Combustion air and exhaust gas system.
The engine is supplied by compressed combustion air with the help of exhaust gas
driver Turbo – charger. Each bank cylinder is provided with a Turbo – charger.
Turbo – charger is provided with filters. The exhaust is passes through silencer.
6. Speed governing system.
Governer is hydraulic mechanical type. The governer is linked to the fuel racks.
The maximum work output of the UG – 8 governer is 8 lb – ft over the full 42°
travel. For full load 30°is sufficient and remaining for overloading.
Governer comprises
a. Speed droop setting.
b. Oil sight glass.
c. Load limiter
d. Compensation pointer and adjuster.
e. Local speed adjuster.
7. Two numbers of ventillation fans are provided in each DG building. One starts at
respective DG breaker close and other at >45°C. DG room is provided with 7
numbers of smoke detectors (ionized type) and 7 numbers of flame detectors
(photoelectric type).
8. Separate DG’s are having separate MCC for their auxiliaries power supply. For
DG – 1 auxiliaries MCC P1. For DG – 2 auxiliaries MCC Q1 and for DG – 3
MCC DG – 3 is provided.
9. Phase winding is provided with two RTD’s for hotspot measurement and bearing
provided with one RTD each.
10. LCP is provided one each for each DG.
• When DG’s start is not possible?
Question and answers Electrical Maintenance Unit
- 385 -
1. DG trip.
2. Turning gear engaged.
3. DG set stop push button pressed.
• What are stages of DG starting?
1. At start signal compressed air through solenoid valve passes over piston and
rotates the shaft.
2. At speed >60-rpm ignition starts.
3. Closing of excitation starts at >800-rpm.
4. At speed of > 900-rpm rated speed and rated voltage signal starts.
5. Closing of over speed is at >1150-rpm.
Question and answers Electrical Maintenance Unit
- 386 -
• What are the protections provided for DG?
1. Differential protection (87).
2. Over speed of engine.
3. Reverse power protection (in LOCA condition time delay).
4. Low lubricating oil pressure.
5. Cooling water temperature high.
6. 6.6 kV switchgear protections.
7. Excitation failure.
8. Emergency stops push button.
In LOCA condition 4 – 8 protections are not permitted to operate.
Question and answers Electrical Maintenance Unit
- 387 -
Electronics
• What is Diode?
Diode is a two-layer semiconductor device, conducts only positive cycles when
applied to anode.
• What is Thyristor?
Thyristor is a four or more layer semiconductor device & having 3 or more
junctions. It is also called Silicon Controlled Rectifiers (SCR). A healthy SCR must
block in both the directions at least 1MΩ resistance, a fused SCR will conducts in
both directions.
• What is material used in making semiconductor?
Silicon & Germanium are the raw materials used for making semiconductor.
Semiconductors are located between conductors & insulators in the resistivity
spectrum & allow current to flow only under certain conditions.
• What is material used in making non-linear resistor & purpose of it in field discharge
resistor?
Silicon carbide materials used for making non-linear resistor. The purpose of this
resistor is to avoid surge voltage when field breaker opens. These resistors are
connected in parallel to the main field winding (Rotor).
• How over voltage is produced in Field breaker?
Over voltages appear if synchronous generators and motors fall out of step inducing
an AC voltage in the field system. Depending on the type of construction of the
machine and the slip this voltage can become un-permissibly high, for this purpose
over voltage protectors are provided in the field breaker cubicle.
• What is firing angle?
The angle in the AC cycle at which the thyristor starts conducting at the application
of positive voltage to gate is known as the firing angle (α)
• What is Inverter operation?
When firing angle a = 90º the positive & negative voltages areas are equal. With a
higher than 90º the negative areas are greater so the total voltage becomes negative.
This condition is termed as 'Inverter Operation".
• What is the purpose of RC network across thyristor?
RC network across each thyristor protects against Hole Storage Effect.
• Why reactors are provided in Thyristor bridges?
Question and answers Electrical Maintenance Unit
- 388 -
Reactors are provided to limit the rate of rise of current (di/dt) in the device, thereby
avoiding possible damage to the device. They also effect a proper sharing of load
among thyristor bridges when connected in parallel.
Question and answers Electrical Maintenance Unit
- 389 -
• What is purpose of connecting thyristor bridges in parallel?
Thyristor bridges are connected in parallel to improve current rating.
• What is purpose of Load angle limiter?
Load angle limiter, it either limits the angle between grid load center and the rotor
axis or generator terminal & rotor axis.
• What is purpose of Rotor angle limiter?
It limits generator voltage & rotor voltage.
• What is purpose of Rotor current limiter?
It limits overloading of rotor.
• What is purpose of Stator current limiter?
It limits the stator current.
• What is purpose of Slip stabilization?
It avoids oscillation of the AC machine (Rotor oscillations).
• What is purpose of reactive power (VAR)?
It is an energy required to built up magnetic field to drive the power.
• What is the advantage of Static Excitation?
Fast response time, high reliability, interchangeability of parts during operation, less
wear & tear due to static devices & less maintenance.
• What is the advantage of field forcing in the rotor?
Field forcing acts for 10 seconds to maintain the generator terminal voltage during
fault condition so as to operated the protection relays.
• When the negative sequence reactance arises?
Negative sequence arises whenever there is any unbalance present in the system.
Their effect is to set up a field rotating in opposite direction to the main field.
• When the Zero sequence reactance arises?
If a machine is operating with an earthed neutral, a system earth fault will give rise to
zero sequence current in the machine.
Question and answers Electrical Maintenance Unit
- 390 -
Basic Electricity
• What is Current?
The flow of electrons in a circuit is called current, it is measured in Amperes (I).
• What is Voltage?
Voltage is the difference in potential (charge) between two points or voltage is the
amount of driving force or pressure applied to a circuit, it is measured in Volts (V).
• What is Resistance?
The resistance of a circuit is the circuit's opposition to the movement of electrons. A
resistor restricts or limits the amount of current flowing in a electrical circuit, it is
measured in Ohm (Ω).
Series Resistor: When resistors are connected in series they have one point in
common. The total resistance is equal to the sum of the individual resistors.
R tot = R1 + R2 + R3
The current in a series circuit is the same in each component of the circuit because
the current must flow through each resistor in series to get to the next resistor.
I tot = I1 = I2 = I3
The applied voltage divides across each component in a circuit in proportion to the
resistance of the component. V tot = V1 + V2 + V3
Parallel Resistor: When resistors are connected in parallel, they have two points in
common. The total resistance of parallel resistors is equal to the reciprocal of the
sum of the reciprocal of the individual resistors. R tot of a parallel circuit is called the
equivalent resistance,
R eq = 1
1/R
1
+ 1/R
2
+1/R
3
Question and answers Electrical Maintenance Unit
- 391 -
• Why color-coding is necessary for resistor?
A wide variety of resistors are physically large enough to have their resistance value
printed on them. However, carbon composition resistors are too small for this
method of identification so a color coding system is used. Four bands are printed on
one end of the resistor and are read from the band closest to the end of the resistor
toward the center. Each color represents a numerical value as indicated below.
0- Black 3- Orange 6- Blue 9- White ±5% - Gold } Tolerance
1- Brown 4- Yellow 7- Violet 0.1- Gold ±10% - Silver }
2- Red 5- Green 8- Grey 0.01- Silver
Suppose the color bands of a resistor are yellow, violet, red and gold. The resistance
value is determined as follows:
4 7 00 = 4700Ω
Yellow = 4
Violet = 7
Red = 2 (two zeros)
Gold = ±5%
4700+5% = 4935} The actual resistance should be between 4467 and 4935 ohms.
4700-5% = 4465}
Occasionally a fifth band is used to indicate the failure rate of the resistor:
Yellow 0.001% per 1000 hours
Orange 0.01% per 1000 hours
Red 0.1% per 1000 hours
Brown 1.0% per 1000 hours
• What does Ohm's Law states?
In a closed electrical circuit, current is directly proportional to voltage and inversely
proportional to resistance at constant temperature.
I= V/R. Where I= Current, V= Voltage & R= Resistance
• What does Kirchhoff's voltage law states?
Kirchhoff's voltage law states that " the algebraic sum of potential rises and drops
around a closed loop is zero." Σ􀀴V= 0
• What does Kirchhoff's current law states?
Kirchhoff's current law states that " the algebraic sum of current entering and leaving
a node is zero." (A node is a junction of two or more branches.)
• What is a Capacitor?
When two conductors are placed side by side, separated by a nonconductive
material, and connected across a battery, free electrons drift in the direction of the
Question and answers Electrical Maintenance Unit
- 392 -
driving voltage is called capacitor. Its unit is farad, normally in micro farad (μf) or
Pico farad (pf).
Question and answers Electrical Maintenance Unit
- 393 -
• What is Inductor?
Inductors use the ability of electrical current to create a magnetic field. If a voltage is
applied to a coil of wire, the current flowing in the coil will cause a magnetic field to
develop. The more times the wire is coiled and the more current there is in the coil,
the greater the strength of the magnetic field. Its unit is Henry, normally in milli
Henry (mH).
• What is Inductance?
The property of a coil that opposes a change in the current flow is called inductance.
The inductance of a coil depends on four factors:
1) The number of turns (windings) in the coil. Inductance is proportional to the
square of the number of turns in the coil.
2) The diameter of the coil. The larger the diameter of the coil, the higher the
inductance.
3) The permeability (ability to become magnetized) of the core material.
4) The length of the coil. The shorter the coil, the higher the inductance.
• What is Power?
Power is a rate of doing work, or works done per unit in time. The unit for measuring
power is the Watt (W). Power in watts is equal to the product of the applied voltage
and the current flowing. Stated algebraically, P = I E
• What is Alternating Current?
Continually changing amount and direction of the current and voltage is called
alternating current (AC). The components of an ac circuit causes a time period to be
introduced between current and voltage; that is, current and voltage are out of phase.
Question and answers Electrical Maintenance Unit
- 394 -
Few definitions and symbols used in alternating current
1) Amplitude or peak value: The maximum value reached by a waveform.
2) Capacitive reactance (XC): measured in ohms, is the opposition to a change in
current flow provided by a capacitor. Capacitive reactance causes current to lead
voltage by 90°: Xc = 1/2p f C.
3) Cycle: The portion of a waveform contained in one period of time.
4) Effective value: The value of voltage that occurs at 45° (0.7071 times the
maximum value).
5) Frequency: The number of cycles per second is called frequency and measured in
Hertz (Hz).
6) Impedance (Z): The opposition to current flow in an ac circuit. It is a combination
of resistance, Inductance and capacitance.
7) Inductive Reactance (XL): Inductive reactance, measured in ohms, is the
opposition to a change in current flow produced by a coil of wire. Inductive
reactance causes current to lag voltage by 90° : XL = 1/2π f L.
8) Instantaneous value: The magnitude of a waveform at any instant of time.
9) Period (T): The time interval between successive repetitions of a periodic
waveform.
10) Periodic waveform: A waveform that continually repeats itself after the same
time interval.
11) Resistance: the opposition of a circuit to the movement of electrons. Resistance
in an ac circuit acts the same as resistance in dc circuit.
Question and answers Electrical Maintenance Unit
- 395 -
Measuring Instruments
• What is Voltmeter?
It is an instrument to measure voltage. It is always connected in parallel to the power
supply.
• What is Ammeter?
It is an instrument to measure the current flowing in a circuit. It is always connected
in series with the load.
• What is Megger?
The megohmmeter, commonly called a megger for short, is used to measure very
high resistance values. It is primarily used to test the insulation of conductors. To
measure high resistance values, a high voltage is applied, either by the use of a handcranked
generator or electronic power supply.
• What is Clamp-On Ammeter?
Clamp-on ammeter is used to check the current in a circuit, without being physically
connected in a circuit. They are convenient to use in the field since the circuit does
not have to be opened to take a current reading.
• What is Infrared or Thermal scanner?
Infrared or thermal scanners are used to measure temperature without contact with
the equipment. They produce an image of the component showing temperature
variations, this is effective in spotting worn or loose connections and components in
industrial circuits.
• What is Phase sequence indicator?
Phase sequence indicator used to indicate the 3-phase direction- comes in two styles;
Lights and meters. In the lighted variety, a sequence of light goes on for the phase
sequence being read, while the meter indicates which phase direction it is reading.
• What is Rotation tester?
This device is used during the installation of a motor to determine the direction of the
motor once it is installed. The shaft is mechanically rotated in the desired direction
and the meter indicates if that is the direction in which the motor will rotate.
Question and answers Electrical Maintenance Unit
- 396 -
DC Machines
Conversion of one form of energy into another enables us to use natural power
sources as well as manufactured power sources to produce our electrical power
supply. Although electricity can be produced by friction, pressure, heat, light,
chemical action and magnetism, the most common method used by large power
producers is magnetism.
• What is Electric Generator?
Electric generators are called a dynamo that converts mechanical energy into
electrical energy. A dynamo consists of two basic parts- the stationary part and the
rotating part.
• How electromotive force is created in a generator?
When a conductor cuts the magnetic lines of forces, an Electro motive force (emf) is
generated.
The magnitude of the generated voltage is directly proportional to the rate of change
at which a conductor cuts the magnetic lines of force.
• What is DC motor?
An electric motor converts electrical energy in to mechanical energy.
• How many types of DC motors are there?
DC shunt motor: shunt motor speed varies slightly from no load to full load.
DC series motor: series motor speed varies greatly as load changes.
DC compound motor: the compound motor contains both a shunt field and a series
field and therefore has characteristics between the shunt and the series motors. This
motor has the good starting torque characteristics provided by the series field, while
the shunt field provides for a relatively constant speed.
Question and answers Electrical Maintenance Unit
- 397 -
Maintenance & Troubleshooting
• Troubleshooting is a field if repair work that usually tells how well the student
has learned the lessons. The principles involved in control functions, components
and circuit analysis, along with the basic laws of electricity.
• Your best tool when troubleshooting is your ability of think. Don't jump to
conclusions. Have confidence in your ability. Learn how the equipment in your
area is supposed to operate both electrically and mechanically.
• Observe all plant rules and regulations. Electricity can be dangerous. In addition
to the hazards of electrical shock and electrocution, burns from an electrical flash
can be devastating. Be careful when opening the circuit. The inductive kick that
can occur when a circuit opens produces a voltage that is many times the voltage
applied to the system.
• No matter how complex or expensive an electrical control system is, the
components of the system begin to deteriorate as soon as they are installed and
failure of some components in the system will ultimately result.
• Blown fuses, overload contacts, open contacts, short circuits, burned out coils and
grounds are responsible for most electrical circuit failures.
• Troubleshooting can be generalized in 3 steps:
1) Determine the symptoms; that is, find out how it acts. (When equipment is
operating properly, you should find out how it is supposed to function.)
2) Decide by logical reasoning what might be wrong. (Try to isolate the problem
to a section of the control.)
3) Determine what has to be done to correct the problem.
• If we are troubleshooting an existing circuit, one that has been in service and
operated properly, we can eliminate the possibility of fault installations or design.
• The first step- determine the symptoms- can best be accomplished by working
with the machine operator and following the machine through its sequence to the
point of failure.
• Remember that no matter how complex, control circuit are made up of only two
things. Contacts that open and close a circuit and coils that operate the contacts,
keeping in mind the control voltage.
• Probably the single most important rule in trouble shooting is to remember to
change only one thing at a time.
• Remember the operator knows the machine operation and can be an asset to you
in your troubleshooting. Question the operator but don't challenge his operating
ability.
Question and answers Electrical Maintenance Unit
- 398 -
• Anyone attempting to troubleshoot without a drawing and a meter is wasting the
time.
• Instead of random checking the circuit; start from the source to the machine or
from the machine to the source.
• Finally take time to think.
Question and answers Electrical Maintenance Unit
- 399 -
Radiation Protection
Fission reaction
92U235
0n1
54Xe144 + 38Sr90 + neutron + radiation + Energy
Tritium formation
1H2
0n1
1H3
1 Seivert = 100 Rem
Annual Dose Limit (ADL) = 20 mSev or 2 Rem for Employees.
Annual Dose Limit (ADL) = 1 5 mSev or 1.5 Rem for Contractor.
Annual Dose Limit (ADL) = 1 mSev or 100 mRem for Public.
5 Years = 100 mSev or 10 Rem
DAC (Derived Air concentration)
>10 DAC use tritium bottles
10-15 DAC use airline
>50 DAC use ventilated plastic suite (VP suite)
1 DAC for 1 hour = 0.01 mSev or 1 mRem.
• Why no entry for Moderator room & Pump room during operating condition?
Due to the presence of N16 & O17, which are high gamma emitter, their field is
around 7 mev.
• What are the gases discharged to the stack?
Argon-41, Tritium, fission products, noble gases & Iodine particulates.
Question and answers Electrical Maintenance Unit
- 400 -
• What are the emergencies provided in the plant?
Plant Emergency: Excessive release of radioactive material or high radiation fields in
a section of the plant
Site Emergency: Uncontrolled release of radioactive material or high radiation fields
with in the site boundary
Off- Site Emergency: High release of radioactive material from the plant resulting in
significantly increased radiation fields and/or contamination levels extending to
areas outside the site
Emergency Planning Zones (EPZ): Emergency planning zone, defined around the
plant up to 16 km, provides a basic geographic frame work for decision making
on implementing measures as part of a graded response in the event of an
emergency. The area around the Kaiga generating station is divided into the
following Zones up to 16 km radius.
Exclusion Zone: The exclusion Zone extends up to a distance of 1.6 km around the
central plant zone of 0.7 km where no public habitation is permitted. This zone is
physically isolated from out side areas by plant fencing and is under the control of
Kaiga Generating Station.
Sterilised Zone: Sterilised zone is an area where no new growth of population is
permitted. Natural growth is however allowed in this Zone. This are extends up to
a radius of 5 km from the central plant Zone. This Zone is defined to restrict the
population to an easily transportable number in case of an emergency.
Primary Zone: The primary Zone extends up to 8 km from central part Zone where
protective measures like evacuation and sheltering are required against possible
plume exposures during an Emergency.
Secondary Zone: The secondary Zone extends up to 16 km from central plant Zone
protective measures like sheltering control on food stuff are required against
possible exposure from ingestion of radioactivity.
Question and answers Electrical Maintenance Unit
- 401 -
CLASSIFICATION OF EMERGENCIES
Emergencies are classified on the basis of the nature and severity of the incident. The
effect of the emergency may be restricted either to a small area of the plant or a few
individuals or it may pose damage to the installation staff. Emergencies of more
severe nature could result in unacceptably enhanced release of radioactive materials
or toxic/noxious substance from the plant of resulting in hazard in the surrounding
public domain. Accordingly the emergencies are classified into:
1. Plant emergency
2. Site emergency
3. Off-site emergency
Plant Emergency
This type of emergency is classified in to
a) Personal emergency
b) Emergency Alert
c) plant emergency
Personal Emergency: This involves accidents or incidents in any of the plant areas,
which call for emergency treatment of personal. The situation may result from
high radiation exposure or significant contamination or abnormal intake of
radioactivity by personal. The examples of personal emergencies are listed in
Annexure-I.
Emergency Alert/Emergency Standby: This involves abnormal conditions, which
have a potential to proliferate in to a more serious situation but still provide time
for pre-cautionary and constructive steps to prevent an emergency situation or
migrate its consequences. The examples of emergency Alert are listed in
Annexure-II.
Plant emergency This involves excessive release of radioactive materials or high
radiation fields in a section of the plant requiring operator action and/or automatic
operation of the safety system. Although positive isolation or restriction on
occupancy of the affected areas might be enforced, evacuation of personal might
be required if it is suspected that the doses to personal or likely to exceed the
intervention levels. The examples of plant emergency conditions or listed in
Annexure-III.
Site Emergency
This class of emergency arises due to situation, which seriously affect plant
operation involving high radiation fields in accessible areas and release of
radioactive materials extending beyond the plant up to the site environment. The
protective measures such as incorporation of stable Iodine, sheltering and evacuation
of personal from plant areas other than control room to areas designated to be
habitable under the site emergency conditions and evacuation of non-essential
persons from the site may be considered. The examples of site-emergency condition
are listed in Annexure –IV.
Question and answers Electrical Maintenance Unit
- 402 -
Off-site Emergency
An Off site emergency situation results when the release of radioactive materials
from the plant is of a magnitude necessitating protective action to be taken for
members of the public in the neighborhood of the plant.
Question and answers Electrical Maintenance Unit
- 403 -
EMERGENCY DECLARATION AND NOTIFICATIONS:
Declaration of Emergencies shall be made by the Duty SCE / PED based on the
information from the plant or as per the advice from Kaiga emergency Committee
(KGEC).
Declaration of Emergency: Siren will be sounded as described below for declaring
emergency. Following the Siren, there should be an announcement.
Siren: Short intermittent siren 5 seconds on, 5 seconds off for a period of two
minutes.
Emergency Announcement:
The announcement shall be made as follows;
"ATTENTION ALL PERSONNEL - THERE IS PLANT EMERGENCY"
THE INCIDENT AREA IS …………………………………….
THE ASSEMBLY AREA IS ……………………………………
THE EMERGENCY CONTROL CENTRE IS……………...…..
PERSONS PRESENT AT …………… SHOULD AVOID GOING TO ………...
This announcement shall be repeated thrice in English, Hindi and Kannada.
Evacuation: Evacuation if necessary will be made by announcement on Public
Address (PA) system.
Termination of Emergency: A continuous Siren is sounded for 2 minutes. Following
the emergency Siren, there shall be an announcement in English, Hindi and Kannada
on public address system terminating the emergency.
Notification Codes:
The messages for notification of start/termination of on site and off-site emergencies
are indicated as follows. These should be disseminated to various agencies. The
codes for notification of commencement or termination of various types of
emergencies are:
a) External radiation exposure (mSv) DAC-hr (HTO) DAC-hr(I-131)
DAC-hr (I-131) ------(≤ 1)
(For meeting iodine thyroid dose limit of 50 mSv)
The explanatory notes for these guidelines are given in Annexure-IX.
Question and answers Electrical Maintenance Unit
- 404 -
Countermeasures during a radiation emergency: Following countermeasures have
been identified for control of exposures during a radiological emergency within the
plant site areas and in the public domain.
1. Sheltering
2. Administration of Stable Iodine
3. Evacuation.
4. Relocation.
5. Control of Access.
6. Control of Food and Water
7. Decontamination of Affected Areas and Buildings.
DOMAIN:
Domain 1 = 0.1 mSv/hr
Domain 2 = 0.01 mSv/hr
Domain 3 = less than 0.01 mSv/hr
Stochastic and Deterministic effects.
Stochastic effects: Stochastic effects are those for which the probability of an effect
occurring, rather than its severity, is regarded as a function of dose, without
threshold. Example: Cancer.
Deterministic effects: Deterministic effects are those for which the severity of the
effect varies with the dose, and for which a threshold may, therefore, occur.
Examples Cataract, permanent or temporary sterility.
Practices: Any human activity, which increases the overall exposure to radiation, is
a "Practice" such as operation of nuclear power stations.
Intervention: Any human action intended to reduce or avert exposures to sources
which are not part of controlled practices or which are out of control as a
consequence of an accident is "Intervention".
Objectives of Radiation Protection: Prevent deterministic effects and to limit the
stochastic effects to levels deemed to be acceptable.
Question and answers Electrical Maintenance Unit
- 405 -
Principles of Radiation Protection:
Practices:
a. Justification: No practice shall be adopted unless its introduction produces a
sufficient benefit to the exposed individual or to the society to offset the
radiation harm that it might cause.
b. Optimisation: All exposures shall be kept As Low As Reasonably Achievable
(ALARA) economic and social factors being taken into consideration.
c. Dose limitations: Individual exposures are limited by dose limits since the
dose above the dose limits are unacceptable
Intervention: The general principles of radiological protection for intervention are:
a. The reduction in dose should be sufficient to justify the harm and the costs to
the individual and the society due to the intervention.
b. The benefit of the reduction in dose less the cost of intervention should be As
Large As Reasonably Achievable.
c. Dose limits do not apply in case of intervention. However there will be some
projected dose levels above which intervention will be justified because of
serious deterministic effects.
Dose limits: Occupational Workers
a. For stochastic effects: The dose limit for uniform irradiation of the whole body
shall be 20 mSv (2 Rem) averaged over 5 years (January 1,1999 to December
31,2003) and shall not exceed 30 mSv (3 Rem) in a single year.
b. The average whole body dose for the occupational workers in the station
should normally not exceed 5 mSv (500 Rem).
c. For deterministic effects, the dose limit shall be 500 mSv (50 Rem) in a year
to Bone surface, Skin and for the lens of the eye, for which the limit shall be
150 mSv (15 Rem) in a year.
The whole body exposure level should Remain less 10 mSv (1 Rem) in any month
and 15 mSv (1.5 Rem) in any calendar quarter.
In case of intakes of radioactive material into the body, the total amount of activity
taken into the body in a calendar year shall not exceed one ALI (Annual Limit on
Intake).
Incase of exposure resulting from both external radiation and intake of radionuclides
in the body it shall be ensured that the sum of effective dose resulting from all such
exposures does not exceed the annual dose limits.
Whole body dose Ii -- + Σ -- < 1
0.02 Sv (ALI) I
Where Ii is the intake of the i th radio-nuclide and (ALI) i the ALI value for the i th
radio-nuclide.
Question and answers Electrical Maintenance Unit
- 406 -
Planned Exposure: Situation may occur in-frequently during normal operations when
it may be necessary to permit a few workers to receive dose in excess of the annual
whole body dose limit. In such circumstances, Station director may permit exposure
such that dose does not exceed 30 mSv in a single year and 20 mSv averaged over 5
years.
Question and answers Electrical Maintenance Unit
- 407 -
External Exposure Control: Any external whole body exposure that exceeds 5 mSv
(0.5 Rem) in any month is referred to as significant dose.
Internal Exposure Control
a. Proper ventilation of work areas and use of the recommended protective
equipment would avoid intake of radionuclides in the body.
b. In any case of actual or suspected high intakes HPU should be contacted for
advice and appropriate action.
KGS-Operating Manual on Radiation Protection Procedures
For assessment of internal exposure due to tritium, bioassay of urine will be taken as
the standard reference. For assessment of internal exposure by radionuclides other
than tritium bioassay and/ or whole body counting whichever is applicable will be
taken as standard reference. For control of intake of tritium the following procedures
shall be l Exposure Control followed:
Permissible Contamination levels
Air borne Contamination the levels of air borne contamination in working areas at
the station should be maintained below the Derived Air Concentration (DAC) values
DAC (Bq/m3) = ALI Bq/2400 m3
Investigation of Doses
Investigation levels Whole body dose: Committee (SDIC) shall investigate these
exposures
Dose Reference Levels for Investigation
Tissue/Organ Investigation Levels mSv (Rem)
Monthly Quarterly Yearly
Whole body 10 (1) 15 (1.5) 20 (2)
Skin 100 (10) 300 (30) 500 (50)
Lens of Eyes 30 (3) 80 (8) 150 (15)
Question and answers Electrical Maintenance Unit
- 408 -
The functions of SDIC:
a. To investigate fully the causes of the doses above the investigation levels and
to prepare a factual report.
b. To suggest Remedial measures to prevent recurrence of such doses.
c. To suggest further action in respect of work to be allocated to the exposed
person.
d. To recommend Remedial measure and medical follow up wherever necessary.
Exposure exceeding any of the limits stipulated below shall be regarded as
potentially serious:
Whole body dose: 100 mSv (10 Rem)
Exposure to Eye Lens: 300 mSv (30 Rem)
Such cases shall be referred to Head, Medical Group, BARC and Chairman,
SARCOP immediately
Head, Medical Group, BARC shall initiate appropriate medical investigation
Medical report shall be submitted to Chairman, SARCOP, within a week. Chairman,
SARCOP shall constitute a special committee for investigation of such exposures.
Tritium half life: Radiological =12.3 years, Biological = 7 days, tritium effective =
(TR *TB) / (TR +TB)
(12.3*365*7) / (12.3+365+7) = 7 Days
REVERSE SQUARE LAW: Dose at a rate form the point of source is inversely
proportional to the square of the distance. I is inversely proportional to L / d square
Technical specification Values: Fission products
Noble gases 14.8 TBq / day, Tritium = 13TBq/day, Ar 41 = 2.04 TBq / day,
I-131 = 185 MBq/day, Particulate = 1480 MBq / day
Liquids: Tritium = 1.295 TBq/day
RADIOACTIVE TRANSPORT INDEX: 1 meter from the source shield. Declaration
of radioactive material = 70 kiloBq / kg
Question and answers Electrical Maintenance Unit
- 409 -
Maintenance Performance Planning
1. Essential sequence of maintenance Jobs execution.
Identify maintenance jobs, asses safety, radiological precautions, plan the work,
do the pre-job briefing, take the safety and ALARA measures, carry out the
maintenance, test and normalise equipment or system, update records and history
cards, review maintenance performance and devise future strategy, achieve
excellence in maintenance through dedicated team work.
2. Maintenance performance indicator based on equipment & work control
Maintenance performance indicator (MPI) is the measure of performance of each
aspects of maintenance. These are established as convenient measures to evaluate
current performance levels against standard as well as an index to compare with
past performance.
MPI base on equipment performance (EMPI)
a) Equivalent availability % (should be as high as possible)
Equipment operating time x 100
Equipment operating time + down time
b) Mean time between failures (MBTF) should be as high as possible
Number of operating hours
Number of failures/breakdowns
c) Meantime to repair (MTTR) as low as possible
Sum of repair time
Number of breakdowns
d) Number of plant outage caused due to equipment failure. (Objective should
be zero)
e) Number of respective failures during reporting period. (as low as possible)
f) Number of breakdowns during reporting period (As low as possible)
3. Maintenance Performance indicator based on work control
a. Work control indicator (WCI) should be near to unity
No. of DR received from control room per month
No. of PM jobs planned
4. Maintenance performance indicator based on maintenance man hours
1) Man hours spent on breakdown maintenance
2) Man hours spent on PM including implementation of ECN/FCN’s etc.
3) % man hours spent on breakdown maintenance
Man hours spent on = Breakdown maintenance 100
Total maintenance man hour available
4) % of man hours spent on PM
= Man hours spent on PM x 100
Question and answers Electrical Maintenance Unit
- 410 -
Total maintenance man hour available
Question and answers Electrical Maintenance Unit
- 411 -
• What is FME explaining with the examples?
Foreign material is defined as material that is not part of a system or component as
designed. This includes dirt, debris, broken or missing parts, slag, tools rags,
liquids/chemicals, lapping compounds, grinding particles and any other item that
would affect the intended operation of a system or component
All personnel shall assume responsibility for preventing the introduction of foreign
material into systems. This will minimize damage or harmful effects. Such as
corrosion, fuel damage, component malfunction, or failure, changes in chemistry.
Reduced heat transfer, increased radiation levels, changes in system flow
characteristic and improper contact operation.
Specific actions includes the following
Work packages will be planned using field walk downs to determine specific FME
recommendations
If temporary dams are installed which will not be readily visible upon system
closure, verification of removal shall be included in the checklist.
• What is the importance of communications?
Effective, open communication is essential for safe and efficient performance of
plant maintenance. Expressing concerns describing assignments, discussing
problems, are few aspects of maintenance of communication. Clear and
unambiguous communication is an integral part of procedure compliance and safe
work practice. The following additional communication practices will be followed.
a. Repeat back is used to ensure accurate communication, especially when portable
radios, headsets, or telephones are being used.
b. Upon completion of a task, technicians shall report job completions to their
supervisors and seek additional assignments.
c. To confirm to the principle of solving problems at the lowest possible level,
potential grievance issues are to be discussed with the first line supervisor.
d. Plant approved terminology, equipment identification and abbreviations are to be
used at all times.
e. 2-way communication is required at times!
f. Listen
g. Understand
h. Then reply or repeat message.
Question and answers Electrical Maintenance Unit
- 412 -
• Importance of self checking peer verification
a. STAR Principle
S- Stop pause before performing a task,
T- Think Understand exactly what is to be done before taking any action.
A- Act Touch the component without actuating it. Then do it.
R- Review, verifies that the actual responses is the expected response.
b. Self-checking is a self-verification step or action before it is performed. This
behavior is developed through constant checking to ensure the intended action is
correctly and positively performed on the right equipment. Consistently applied this
will minimize error by forming a barrier against complacency and over confidence.
All are responsible for conducting self-checking prior to manipulating a component
or devices, or altering equipment configuration. For examples relays, positioning
switches, breaker or valves, lifting/landing wires, connecting test equipment,
removing or installing fuses.
c. Any deficiency found in the field like labels, nameplate missing/tampered
should be intimated to the supervisor.
d. Do it right the first time.
e. Peer verification is achieved through the use of inspection points, these include
dual verification, independent verification, supervisory verification and quality
verification. Peer verification leads to a broader concept of checking other.
f. Questioning attitude should develop for continuously learning.
Question and answers Electrical Maintenance Unit
- 413 -
The distinction between predictive and periodic maintenance is presented below.
a. Use predictive maintenance results to trend and monitor equipment performance
so that needed corrective or preventive maintenance can be performed before
equipment failure.
b. Predictive maintenance actions are determined by the data required to monitor
equipment condition.
Examples are as follows:
Vibration analysis (includes spectral analysis and bearing temperature
monitoring) and lubrication oil and grease analysis are used to monitor rotating
equipment.
Infrared surveys (thermography) are performed on heat producing equipment
such as motors, circuit breakers, batteries, load centers, bus ducts, transformers
and insulated areas to monitor for high resistance or insulation breakdown.
Oil analyses are performed on lubrication for rotating equipment to identify
degrading equipment and chemical breakdown of lubricants.
Motor operated valves are diagnostically tested and analysed. Tests determine
parameters such as run current, valve stem thrust and torque switch and limit
switch actuation points.
c. Periodic maintenance is time based action taken on equipment to prevent
breakdown and involves servicing such as lubrication, filter changes, cleaning,
testing, adjustments, calibration and inspection. Periodic maintenance can also be
initiated because of the results of predictive maintenance, vendor
recommendation, or experience. Examples are as follows:
a. Scheduled valve re-packing to avoid leakage based on previous experience.
b. Replacement of bearings or pump realignment as indicated from vibration
analysis and/or lubricating oil analysis
c. Major or minor overhauls based on experience or vendor
recommendations.
d. Maintenance on equipment belonging to a redundant safety system if so
allowed by the Technical Specifications
d. Preventive Maintenance Programme Effectiveness
Continually review the preventive maintenance programme for effectiveness, and
change if necessary based on changes in plant design, operating conditions,
regulatory commitments and as found conditions. In addition, unexpected
equipment failures should result in a critical self-assessment to determine why the
previous maintenance activities were insufficient to maintain equipment
reliability. The primary objectives of the programme are to reduce future
component failures, optimize preventive maintenance tasks and use of resources,
identify programme scope and satisfy regulatory and utility concerns. Emphasize
obtaining accurate feedback on preventive maintenance tasks. Enhancement,
provide additional guidance on methods to determine preventive maintenance
effectiveness.
Question and answers Electrical Maintenance Unit
- 414 -
Question and answers Electrical Maintenance Unit
- 415 -
• What are the advantages and disadvantages of planned maintenance?
Advantages of Planned Maintenance.
1. As the name reflects maintenance jobs planned properly ie. manpower, tools,
tackles, required for maintenance is well planned and readily available or
reserved for planned job
2. Procedures for doing the job in well known before doing the job and job can
be performed as per procedure/checklist.
3. It saves the time and unplanned outages of equipment.
4. Common facilities/tools/tackles/ in the section in the section can be made
available at the right time as job and requirements for that are already well
planned.
5. Overtime to employees can be limited.
6. Job can be done systematically, accurately as quality job can be expected.
Disadvantages of Unplanned maintenance.
1. Unplanned job won’t have any expectations when to start, when to stop.
2. Man power/tools tackles were available/not available at the right time is not
ensured.
3. Job may have to do in hurry which can lead to mistaken or job can be done
leisurely (no sufficient work front for the available manpower.) so wastage of
man machine tools etc.
4. In NPP we cannot accept unplanned jobs, as all works are safety
related/important.
• What is pre-job briefing and post job briefing?
Pre-job briefing: Unit no, DR/WP/, USI/system/load, Job description, Eqpt history,
Scope of Job, Any special tool or equipment required, Safety/Alarm, Procedures,
expectation for the job, tech specifications requirements, communication, FME
requirements, environmental concepts, any abnormal conditions.
Post job briefing: Details of work done, difficulties faced, deficiency found, parts
replaced, experience to be communicated, review modification, review procedure,
any suggestions, drawing updating, updating of history card, completion of
checklist, any testing/logic checks required, clearance for surrendering permit.
Question and answers Electrical Maintenance Unit
- 416 -
• What are the activities by which performance of the station will be judged?
Activities of station by which performance is judged by public
a. Capacity factor.
b. Availability factor.
c. Radiation release (gas and liquid effluents).
d. Thermal release.
e. Man-rem.
f. Development programs.
g. Public awareness.
h. Usefulness of the plant product to the public.
i. Employment and other facilities provided to the local public.
j. The Basic amenities provided to the employees.
k. The standard of living of the employees.
l. The profit earned by the Plant.
m. The quality and cleanliness in and around the Plant.

8 comments:

  1. Very attractive and effective blog is created by the blog owner I like the way of present his view with visitors. I would like to come on this blog again and again. Soldering Fluxes, Aluminium Soldering Flux

    ReplyDelete
  2. Exceptional blog. and good explanation. I read thro outs all Question and answer . All question and answer are very useful for all visitor.
    CSP Trailing Multicore Rubber Cables

    ReplyDelete
  3. This is a humungous list but at the same time it is the most important and essential points and definitions a person should know if related to power and electricity.

    Best LT Power Cable (XLPE/PVC)

    ReplyDelete
  4. Gud Information. For Safety Purpose use only Relemac Electrical Cables .

    ReplyDelete
  5. Transformer winding ar at intervals the foremost classified into a try of varieties like coaxal coils and sandwiched coils. In coaxal coils, the device windings ar organized concentrically surround the core ring with the large voltage coil being wound over the lower voltage coil device.Enameled Wire

    ReplyDelete
  6. Transformer winding ar at intervals the foremost classified into a strive of types like concentric coils and sandwiched coils. In concentric coils, the device windings ar organized concentrically surround the core ring with the massive voltage coil being wound over the lower voltage coil device.Inductor Winding

    ReplyDelete
  7. The device winding minimize leak inductance and capacitance, it's accustomed maximize high frequency response. Coils ar divided into sections, that sections ar interleaved between entirely whole whole entirely all altogether entirely totally entirely totally whole all entirely totally whole completely different winding sections.automatic winding machine

    ReplyDelete
  8. Ubiquiti Networks ETH-SP-G2 Surge Protector in UAE, Ethernet Surge Protector in UAE, Surge Protector in UAE
    https://gccgamers.com/ubiquiti-eth-sp-g2.html
    Ubiquiti Networks in UAE, Safe Shopping Multiple Payment Options Express Delivery GCC Gamers Moneyback Guarantee.
    1634099960404-11

    ReplyDelete